EPH-3 Tape Echo Simulator

The Hermida Audio EPH-3 Tape Echo Simulator is a custom-built pedal designed by Alfonso Hermida, known for its lush, fat, and warm tones attributed to the FET preamp and recovery stage. The pedal is limited to 35 units and is hand- tweaked by Alfonso himself. The EPH-3 features the following technical specifications: \- Mix: Allows adjustment of dry/wet mix \- Delay: Adjusts delay time up to 1 second \- Feedback: Controls the number of repeats and regeneration \- Flutter: Adjusts the amount of modulation \- Great dynamic response \- Connectors: Input, Output, DC adapter \- Power Supply: DC adapter \- Dimensions: 4.7″ x 3.7″ x 1.18″ The EPH-3 Tape Echo Simulator is designed to provide guitar players with a versatile and high-quality tape echo simulation, offering a wide range of tonal possibilities and dynamic control over the delay effect.

Zendrive 2

The Zendrive 2 by Hermida Audio is a low-to-medium gain tube overdrive pedal that features high voltage FET technology to clone the Tung-Sol 12AX7 response. The pedal is designed to provide a slight overdrive to mild distortion with great dynamic response and an open sound. Key Features: \- Low-to-medium gain TUBE overdrive with TUNG-SOL 12AX7 TONE \- Slight overdrive to mild distortion \- Great dynamic response and open sound \- Connectors: Input, Output, DC adapter \- Power Supply: 9VDC center negative adapter or 9V battery \- Current Draw: 25 mA The Zendrive 2 incorporates a 12AX7M tube into its design, offering a tonal similarity to the original Zendrive but with a different feel. It provides a subtle but apparent amount of sag to the signal, imparting a warmer, "bluesier" vibe to the sound. The pedal is highly responsive and offers an amp-like feel, adding a beautiful roundness to the tone. Additionally, the 12AX7M tube in the Zendrive 2 is replaceable with other 9-pin preamp tubes, allowing users to tailor the pedal's response and behavior to their specific preferences. The pedal also exhibits an affinity for boosted signals, adding a subtle depth to any overdrive placed before it. It is noted to play well with other pedals and offers warmth, amp-like response, and a genial disposition. The Zendrive 2 is suitable for players seeking an incredibly smooth, round, low-to-medium gain overdrive with a distinctive and iconic sound. It is also recommended for those interested in stacking overdrives or seeking one of the most amp-like pedals available.

Zendrive

The Zendrive by Hermida Audio is a dynamic and touch-sensitive overdrive pedal designed to deliver smooth, round, balanced, low-to-medium gain overdrive tones. It offers a slight overdrive to mild distortion with great dynamic response and an open sound. The pedal features four knobs that control the overall volume, gain, tone, and voicing. At lower settings, it produces extremely light overdrive sounds reminiscent of tube amps set near the "sweet spot," while at higher settings, it increases in gain and sustain, delivering tasty overdrive and low distortion tones. Technical Specifications: \- Power Supply: 9V battery operation or DC adapter \- Dimensions: 4.37″ (L) X 2.37″ (W) X 1.07″ (H) \- Bypass: True bypass \- Analog/Digital: Analog The Zendrive has received acclaim from renowned guitarists such as Robben Ford, Sonny Landreth, Vince Gill, and others for its elegant and musical overdrive tones. It is known for its ability to adapt well to different amps and is highly regarded for its smooth and harmonic factor.

Zendrive 2

The Zendrive 2 by Hermida Audio is a low-to-medium gain tube overdrive pedal that features high voltage FET technology to clone the Tung-Sol 12AX7 response. The pedal is designed to provide a slight overdrive to mild distortion with great dynamic response and an open sound. Key Features: \- Low-to-medium gain TUBE overdrive with TUNG-SOL 12AX7 TONE \- Slight overdrive to mild distortion \- Great dynamic response and open sound \- Connectors: Input, Output, DC adapter \- Power Supply: 9VDC center negative adapter or 9V battery \- Current Draw: 25 mA The Zendrive 2 incorporates a 12AX7M tube into its design, offering a tonal similarity to the original Zendrive but with a different feel. It provides a subtle but apparent amount of sag to the signal, imparting a warmer, "bluesier" vibe to the sound. The pedal is highly responsive and offers an amp-like feel, adding a beautiful roundness to the tone. Additionally, the 12AX7M tube in the Zendrive 2 is replaceable with other 9-pin preamp tubes, allowing users to tailor the pedal's response and behavior to their specific preferences. The pedal also exhibits an affinity for boosted signals, adding a subtle depth to any overdrive placed before it. It is noted to play well with other pedals and offers warmth, amp-like response, and a genial disposition. The Zendrive 2 is suitable for players seeking an incredibly smooth, round, low-to-medium gain overdrive with a distinctive and iconic sound. It is also recommended for those interested in stacking overdrives or seeking one of the most amp-like pedals available.

Mosferatu Low Gain Overdrive

Mosferatu

Reverb 3

The Hermida Audio Reverb 3 is a hybrid reverb pedal designed to produce vintage room, spring, and plate reverb effects. It features a custom, full 24-bit DSP reverb generator, ensuring high-quality sound processing. The pedal incorporates a carefully tuned analog pre-amp and mix amplifier to retain the nuance and dynamics of the dry signal. The Reverb 3 offers a simple interface with Mix and Dwell controls, allowing musicians to access a wide range of reverb sounds on the fly. The Mix control adjusts the wet/dry mix, while the Dwell control manipulates the reverb decay, enabling users to create classic spring and room settings or achieve the warm decay of 70’s plate units. At maximum settings, the pedal can produce expansive, atmospheric reverb effects. Technical Specifications: \- Custom 24-bit DSP reverb generator \- Analog pre-amp and mix amplifier \- Mix and Dwell controls \- True Bypass LED status \- Compact die-cast aluminum case measuring 4.37″ x 2.37″ x 1.07″ \- 9VDC input The Reverb 3 is designed for gigging musicians seeking a versatile reverb pedal that can deliver a wide range of reverb effects, from subtle reflections to expansive, atmospheric sounds.