Bumper

The Bumper by Anasounds is an adaptive resonance buffer designed to safeguard the tone of your pedalboard. It is a compact pedal measuring 50 x 50 x 45 mm and weighing 120g. The design features bamboo, with a sanding level of 8, varnishing level of 6, and laser engraving on die-cast aluminum. The pedal has a power consumption of 3.9 mA and operates on a 9V DC supply with negative polarity. It is equipped with a golden true bypass switching system and integrated circuits from OPA Texas Instruments. The Bumper has an input impedance of 355 kΩ and an output impedance of 120 Ω. It is designed to cancel line losses, maintain dynamics, harmonics, and trebles in the signal, and adapt impedances between pedals and devices. The pedal features an external switch with three positions to modify the resonance peak of your pickups. Additionally, it is intended to recover the genuine signal and avoid line losses when placed directly in front of your guitar.

Spinner

The Spinner by Anasounds is an innovative expression pedal designed to extend the possibilities of the main effect, allowing artistic expression. It features a magnetic system with a boomerang-like metallic star mounted on a screw, inspired by a skateboard, with a magnet under each blade. The rotation rate of the star is detected by a sensor to send the rotation rate to the circuit, affecting the effect every time the star is kicked in a chosen manner. The Spinner offers various modes, including a killswitch mode and the ability to stop or go back to the original speed by stopping the star with your foot. The Spinner is compatible with the Trémolo pedal and the Ages harmonic tremolo pedal, enhancing their possibilities. It includes a 3.5mm jack cable and has no knobs on the surface to avoid accidents, but features three trimpots inside to control the speed threshold that activates the effect, the threshold that deactivates the effect, and the acceleration or deceleration rate of the effect. The Spinner kit is also available for assembly, featuring a simplified circuit board assembly and canning process. The Spinner communicates with the effect pedal using a simple stereo jack and a communication protocol developed by Anasounds. The Spinner is powered by the connected pedal, eliminating the need for a separate power supply. The Spinner's features include a 3-position switch, extra magnets for velocity settings, and trimpots for impact adjustment and threshold settings. The kit includes components for the circuit board assembly and canning, with detailed instructions for assembly. Dimensions: 16 × 12 × 8 cm Weight: 0.01 kg

Utopia

The Utopia by Anasounds is a tape echo pedal with a built-in modulation featuring variable speed and depth. It offers warm, vintage tones and is designed to provide a range of functionalities for musicians. The Utopia Deluxe version includes tap tempo, easy-to-set-up modulations, and a built-in preamp. The pedal is designed for use as a slap-back delay, calibrated for echoes from 0 to 800ms. The Utopia also offers analog delay simulation suitable for various musical styles, from rockabilly to ambient music. Additionally, it features modulation with three continuous presets, tap tempo with subdivisions, and two PT2399 chips, providing 800ms of clean delay and 1000ms of dirty delay. The design includes mahogany, sanding, varnishing, laser engraving, die-cast aluminum, emerald mirror-plexiglass, and logo lighting.

Utopia Echo

High Voltage

The High Voltage by Anasounds is a Plexi distortion pedal designed with specific features and functionality. Here are the technical specifications and design details: \- TONE/ELECTRONIC: Bamboo sanding 8, varnishing 6, laser engraved diecast aluminum, laser engraved logo, white backlight, and intensity controller. \- Input Impedance: 1.4 MΩ \- Output Impedance: 7.6 KΩ \- Power Supply: 9V DC, 55 MA \- Dimensions (L*W*H): 11.8*6.4*5.9 CM \- Weight: 290g \- Switching: Relay true bypass \- Internal Settings: Trimmers for customizing and sculpting tone \- External Settings: Treble cut, voicing, light intensity, 9V supply amount of gain, tone filter, output volume, and bass cut \- Special Feature: Bass cut \- Additional Feature: Soft click footswitch \- Dynamic tone appreciated for open chords \- Distortion well compressed, full of gain The pedal is designed to capture the iconic tones of AC/DC's rock music perfection, replicating the rhythm tones of a Marshall Plexi pushed to its limits with humbuckers, as heard on the iconic album "It’s A Long Way To The Top." The High Voltage pedal offers a blend of modern saturation and vintage flavors, allowing users to customize their own tone. The High Voltage pedal is made in France and is an analog circuit with a weight of 290g. It does not have a tube and operates at 9V voltage. The pedal also features a bass cut and is designed with top-mounted jacks for ease of use.

Bitoun Fuzz

The Bitoun Fuzz by Anasounds is a dual fuzz pedal designed in collaboration with Julien Bitoun. It features two circuits that have been meticulously designed to work together, offering the ultimate fuzz sound. The pedal is inspired by 60's super fuzz designs and addresses the "lost in the mix" syndrome often associated with traditional fuzz pedals. Technical Specifications: \- Manufacturer: Anasounds \- Made In: France \- FX Type: Fuzz \- Pedal Type \- Jacks mounted on top \- Bypass: True Bypass \- Battery: No \- Voltage: 9V \- Polarity: Center Negative \- Circuit: Analog \- Weight: 0.28 kg \- Special Features: Dip Switches \- Dimensions: Width 6.6 cm, Height 5.9 cm, Depth 12 cm The Bitoun Fuzz is designed to provide a powerful and musical fuzz sound while being easy to play. It is a double fuzz pedal, combining two circuits to deliver a unique and sought-after fuzz tone.

Feed Me MK3

The Feed Me MK3 by Anasounds is a versatile and customizable vintage-style analog fuzz pedal. It offers a unique sound ranging from creamy and dynamic fuzz to a powerful and punchy fuzz with sharp trebles. The pedal features the following controls and features: Potentiometers: \- FEED: Adjusts the input level for dynamic response or self-oscillating fuzz. \- OUT: Controls the output level to hit the amplifier. \- SMASH: Alters the supply voltage of the circuit from 0 to 3.8V when the CRACK mode is activated for a brutal gated fuzz. Toggle Switches: \- BASS: Allows for adjustment of low frequencies for a thick fuzz. It also cuts or boosts bass frequencies for different tonal characteristics. \- CRACK: Switches between open and dynamic fuzz or underpowered fuzz for an ultra-compressed gated fuzz effect. Terminal Blocks: \- CAPS: Allows for easy addition and removal of capacitors to adjust the bass response for a more aggressive fuzz. Trimpots: \- BIAS: Affects the bias of the transistors for open and dynamic fuzz. \- FUZZ: Adjusts the gain of the fuzz from creamy to raw tones. Additional Features: \- True bypass with a gold-plated 3PDT footswitch. \- Lumberg DC jack. \- Hammond 1590N1 enclosure. \- Two-tone plexiglass plate engraved with a laser. \- 100% analog processing. Technical Specifications: \- Power Supply: 9V DC negative center \- Off-load consumption: 22 mA \- Power consumption switched on: 75 mA \- Dimensions: 12.7 x 6.7 x 5.9 cm | 5 x 2.64 x 2.32 inch \- Weight: 300g The Feed Me MK3 offers a wide range of tonal possibilities and is designed to be expressive and responsive to the guitar's volume and tone controls.

Freq Up

The Freq Up by Anasounds is a boost pedal designed to enhance guitar tones. It offers a combination of a vintage overdrive and a frequency boost, providing control over the frequencies to be added. The pedal features a creamy overdrive reminiscent of vintage tube screamers and a clean boost with adjustable frequencies to stand out in the mix without coloring the sound. Technical Specifications: \- Power Consumption: 6.7 mA \- Input Impedance: 250 kΩ \- Output Impedance: 11 kΩ \- Supply: 9V DC, 6.7 mA, negative polarity \- OPA Dynamic: 9V \- Switching: Gold true bypass \- Integrated Circuits: OPA Texas Instrument \- Transistors: Bipolars \- Weight: 290 g \- Size (L*W*H): 118*64*59 mm \- Design: Bamboo, die-cast aluminum, emerald mirror-plexiglass, logo lighting with intensity controller \- Internal settings for bypassing the overdrive and adjusting the nature of the overdrive \- Dip switches for selecting different modes and configurations The Freq Up pedal is designed to provide guitarists with a versatile tool for shaping their tone, offering both overdrive and boost capabilities with a focus on frequency control and enhancement.

Savage

The Savage by Anasounds is a warm and powerful overdrive pedal with the following technical specifications: \- Weight: 290 g \- Size (L*W*H): 118*64*59 mm \- Design: Mahogany with sanding of 8 and varnishing of 6, laser engraved, and die-cast aluminum \- Emerald mirror-plexiglass \- Logo lighting with intensity controller \- Input impedance: 260 KΩ \- Output impedance: 1.8 KΩ \- Supply: 9V DC, 22.9mA, negative polarity \- OPA dynamic: 40V effective \- Switching: Gold true bypass \- Integrated circuits: OPA Texas Instrument \- The pedal features two signals in parallel to keep the clean and overdrive at the same time, with a gain knob that has two functions to saturate and mix these two signals. \- The pedal also includes internal and external settings for tone, gain, and voicing, as well as dip switches and trimmers for further customization. The Savage is made in France and is an analog overdrive pedal with true bypass. It does not require a battery and operates at 9V with center negative polarity. The dimensions of the pedal are 118*64*59 mm (L*W*H), and it weighs 290 g.

High Voltage

The High Voltage by Anasounds is a Plexi distortion pedal designed with specific features and functionality. Here are the technical specifications and design details: \- TONE/ELECTRONIC: Bamboo sanding 8, varnishing 6, laser engraved diecast aluminum, laser engraved logo, white backlight, and intensity controller. \- Input Impedance: 1.4 MΩ \- Output Impedance: 7.6 KΩ \- Power Supply: 9V DC, 55 MA \- Dimensions (L*W*H): 11.8*6.4*5.9 CM \- Weight: 290g \- Switching: Relay true bypass \- Internal Settings: Trimmers for customizing and sculpting tone \- External Settings: Treble cut, voicing, light intensity, 9V supply amount of gain, tone filter, output volume, and bass cut \- Special Feature: Bass cut \- Additional Feature: Soft click footswitch \- Dynamic tone appreciated for open chords \- Distortion well compressed, full of gain The pedal is designed to capture the iconic tones of AC/DC's rock music perfection, replicating the rhythm tones of a Marshall Plexi pushed to its limits with humbuckers, as heard on the iconic album "It’s A Long Way To The Top." The High Voltage pedal offers a blend of modern saturation and vintage flavors, allowing users to customize their own tone. The High Voltage pedal is made in France and is an analog circuit with a weight of 290g. It does not have a tube and operates at 9V voltage. The pedal also features a bass cut and is designed with top-mounted jacks for ease of use.

Savage MKII

The Anasounds Savage MKII is a warm and powerful overdrive pedal inspired by the legendary transparent overdrive and reshaped by the manufacturer's engineer. It features a vintage electronic structure to maximize warmth and tone dynamics. The pedal provides clean tone and overdrive simultaneously, offering controls for Out, Tone, and Gain. The Savage MKII is an analog overdrive pedal with true bypass and a power consumption of 23mA. It operates with a 9V power supply (not included) and has dimensions of 120 x 60 x 40mm. The pedal is designed to deliver a K-style transparent overdrive with a host of versatile features. It weighs approximately 0.3 kg and is designed in a compact form factor. The Savage MKII is made in France and offers a unique blend of vintage-inspired design and modern functionality.

Phase Lag

The Phase Lag by Anasounds is a vintage phaser pedal featuring 100% analog modulation using OTA technology, which enables beautiful sound rendering and excellent effect stability. The modulation sweeps all frequencies of the sound, creating a spatialization effect or vibrato, regardless of the rate. The pedal is designed to be simple to use, with two external settings for easy plug-and-play operation. The Phase Lag is known for its mesmerizing vintage phaser effect and its ability to create a hypnotic auditory experience.

Element Premium Bundle

The Element Premium Bundle by Anasounds includes the Element pedal and three spring tanks: Le Bon, La Brute, and Le Truand. The Element pedal measures 5 x 2.4 x 2 inches, while the spring tanks have the following dimensions: Le Bon - 7 x 2.4 x 1.6 inches, La Brute - 9 x 3.2 x 1.6 inches, and Le Truand - 16.5 x 4 x 1.6 inches. The Element pedal features the following controls: \- MIX: Adjusts the dry/wet ratio of the signal. \- OUT: Sets the volume of the wet signal only. \- LOW: Adjusts the amount of low frequencies with the active EQ. \- HIGH: Adjusts the amount of high frequencies with the active EQ. \- Spring Saturation: Activates spring saturation mode, providing a fuzz/overdrive effect. The pedal takes back the essence of analog reverb by physically stimulating springs with the guitar signal, offering a true analog reverb using real springs. The bundle also includes an RCA to 3.5mm cable, mounting screws, and rubber feet for the tanks. The tanks can be mounted to a pedalboard or tucked away in an amp, and the Element pedal is connected to the guitar and amp like any other pedal, providing tonal control with the true sound of real spring reverb.

Le Bon

The Le Bon by Anasounds is a spring reverb tank that offers the following features and specifications: \- Dimensions: The spring tank Le Bon measures 18 x 6 x 4 cm or 7 x 2.4 x 1.6 in. \- Design: The Le Bon features a compact design with a stunning mahogany front plate. \- Functionality: It is designed to deliver authentic vintage tones using real springs and analog circuitry. \- Setup: The Le Bon can be connected to the Element pedal via RCA connectors to generate an analog reverb effect. \- Weight: The weight of the Le Bon spring tank is 0.01 kg.

Spinner

The Spinner by Anasounds is an innovative expression pedal designed to extend the possibilities of the main effect, allowing artistic expression. It features a magnetic system with a boomerang-like metallic star mounted on a screw, inspired by a skateboard, with a magnet under each blade. The rotation rate of the star is detected by a sensor to send the rotation rate to the circuit, affecting the effect every time the star is kicked in a chosen manner. The Spinner offers various modes, including a killswitch mode and the ability to stop or go back to the original speed by stopping the star with your foot. The Spinner is compatible with the Trémolo pedal and the Ages harmonic tremolo pedal, enhancing their possibilities. It includes a 3.5mm jack cable and has no knobs on the surface to avoid accidents, but features three trimpots inside to control the speed threshold that activates the effect, the threshold that deactivates the effect, and the acceleration or deceleration rate of the effect. The Spinner kit is also available for assembly, featuring a simplified circuit board assembly and canning process. The Spinner communicates with the effect pedal using a simple stereo jack and a communication protocol developed by Anasounds. The Spinner is powered by the connected pedal, eliminating the need for a separate power supply. The Spinner's features include a 3-position switch, extra magnets for velocity settings, and trimpots for impact adjustment and threshold settings. The kit includes components for the circuit board assembly and canning, with detailed instructions for assembly. Dimensions: 16 × 12 × 8 cm Weight: 0.01 kg

Sliver

The Sliver by Anasounds is a powerful tremolo pedal with various features and specifications. Here are the technical details and functionalities: \- The Sliver offers a Tap Tempo footswitch, which also functions as a self- oscillation trigger when held down, providing precise tempo adjustments without the need to turn a knob during performance. \- Users can choose from six preset waveforms (sinus, saw, square) via a central switch, and access secondary settings through the Trimpot menu for crafting precise waveforms. \- The pedal features a killswitch option that mutes the sound when the tremolo is switched off, providing a unique performance tool. \- Internal trimpots allow for adjustment of bias and output level, ensuring a highly flexible and evolving tremolo while maintaining a warm, optical sound. \- The Sliver is compatible with the Spinner expression pedal, offering a wide range of additional variations controlled by foot strength. The pedal's design incorporates a microcontroller for expanded functionality while maintaining a 100% analog signal path. It also features a stereo mini- jack for connecting the Spinner expression pedal or an external tap tempo controller. Overall, the Sliver by Anasounds is a versatile and innovative tremolo pedal designed to provide musicians with precise control and a wide range of sonic possibilities.

Ages Tremolo

The Ages Tremolo by Anasounds is a harmonic tremolo pedal that offers a unique modulation effect. It features a hybrid design with an analog signal path and digital controls. The pedal includes a tap tempo footswitch with three available subdivisions, allowing for precise control over the tremolo rate. Additionally, it incorporates an attack follower that can impact the rate or depth based on the player's playing dynamics. The pedal also offers secondary settings for adjusting parameters minutely, enabling the user to achieve unprecedented results. It includes options for self-oscillation by holding down the tap footswitch and a Trimpot mode with extra settings accessible by keeping the on/off footswitch pressed down. The central switch and envelope switch provide access to extra LFOs for different sounds, while the Tone control determines the envelope's impact on the effects. Furthermore, the Ages Tremolo is spinner-compatible, allowing users to enhance the pedal's capabilities with the Spinner expression pedal. The pedal's weight is approximately 0.01 kg, and its dimensions are 16 × 12 × 8 cm.