JF-15 California Sound

The JF-15 California Sound by Joyo is a guitar effect pedal designed to emulate the sound of the Mesa Boogie MKII amplifier, providing natural and focused rock tones. The pedal features an aluminum alloy casing with a stoving varnish finish, giving it durability and a sleek appearance. Technical Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Current Draw: 3mA \- Power: 9V DC adapter or 9V Battery \- Dimensions: 118mm (L) x 87mm (W) x 38mm (H) \- Weight: 460g The JF-15 California Sound pedal offers 6 adjusting knobs for complete sound control, allowing users to tailor their tone to their preferences. It is suitable for guitarists seeking the classic high-gain roar of a Mesa Boogie amp in a compact and portable pedal format.

JF-07 Classic Flanger

The JOYO JF-07 Classic Flanger is a guitar effects pedal that utilizes the Bucket Brigade Device (BBD) circuit to achieve metallic flange sounds, wave- like chorus sounds, and rapid tremulous vibratos. It features four adjustable knobs that control Speed, Regain, Width, and Delay Time. The pedal is designed with a true bypass, minimizing tone loss during operation. The JF-07 Classic Flanger is housed in an aluminum alloy casing with a stoving varnish finish, providing durability and a professional appearance. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Delay Time: 0.9ms-6.4ms \- Speed Range: 0.4Hz-8Hz \- Power: 6F22 9V Battery/DC 9V adapter (not included) \- Dimensions: 11.8(L) x 3.8(W) x 8.7(H)cm \- Net Weight: 0.43kg The JF-07 Classic Flanger is suitable for guitarists seeking to incorporate flanger effects into their music, offering a range of adjustable parameters to customize the flange, chorus, and vibrato sounds to their preferences.

JF-05 Classic Chorus

The JF-05 Classic Chorus by Joyo is a guitar effect pedal designed to deliver a crisp and transparent chorus effect, suitable for embellishment and producing full-bodied 12-string sounds with a deep, clear bell-like tone. The pedal features a true bypass design to minimize tone loss. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 14mA \- Power: 6F22 9V Battery/ DC 9V adapter \- Dimensions: 120(L) X 97(W) X 55(H) mm \- Weight: 390g \- Aluminum alloy casing with stoving varnish finish The JF-05 Classic Chorus pedal is designed for use with electric guitars and is suitable for a wide range of musical styles and genres. Its true bypass design ensures that the pedal does not interfere with the original guitar signal when not in use, maintaining the integrity of the overall tone.

R Series R-05 Maximum Overdrive

\- Dimensions: 125mm x 78.5mm x 48mm \- Weight: 248g \- Input Impedance: 1M Ohms \- Output Impedance: 200 Ohms \- Rated Current: 20mA \- Voltage: 9V DC (Center Negative) Features: \- Based on the Fulltone Full Drive 2 circuit \- Volume, Gain, and Tone controls \- Independent Boost switch and controls \- MOSFET or Standard Diode switch \- 3-way clipping selector \- True Bypass \- Rugged aluminum alloy casing

JF-10 Dynamic Compressor

The JOYO JF-10 Dynamic Compressor is a pedal designed to replicate the classic Ross compressor with minimal noise. It features three main controls: Sustain, Attack, and Level, allowing users to adjust the compression settings to suit their style. The Sustain control manages the duration of compression, while the Attack knob determines when compression kicks in. The Level function controls the compressed volume of the sound as it reaches the amplifier. Technical Specifications: \- Input Impedance: 500kΩ \- Output Impedance: 10kΩ \- Running Current: 8mA \- Power: 9V DC adapter or 9V Battery \- Weight: 300g \- Dimensions: 120mm (L) x 64mm (W) x 55mm (H) \- True bypass design to minimize tone loss \- Aluminum alloy casing with stoving varnish finish The pedal is designed for guitarists seeking to smooth out their sound by controlling volume peaks and dips, resulting in a consistent and wide tone. It can be used with an AC adapter or a 9V battery and features a true bypass switch to eliminate signal interference when switched off. The JOYO JF-10 Dynamic Compressor is suitable for a wide range of use-cases, from achieving mild compression to evening out overall sound on cleaner guitar tones. Its rugged aluminum alloy casing ensures durability, making it a reliable addition to any guitarist's setup.

R Series R-04 Zip Amp Overdrive

The Joyo R Series R-04 Zip Amp Overdrive is a versatile pedal designed to deliver strong compression overdrive tones, making it suitable for lovers of instrumental rock, hard rock, and glam metal. The pedal features controls for Low, High, Volume, and Drive, allowing users to adjust the EQ and push the overdriven tones further. It also includes a toggle switch to control the compression from normal to compressed mode. The R-04 Zip Amp is part of the Revolution series from JOYO, featuring ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lights have three modes: "Sync" to the footswitch, "Always on," and "Off." Technical Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1M Ohms \- Output Impedance: 200 Ohms \- Rated Current: 20mA \- Voltage: 9V Centre Negative power supply The pedal is housed in a tough metal shell with a glossy appearance and true bypass functionality. It operates on a 9V power supply and is designed to provide a balanced and powerful preamp overdriven tone with compression control.

JF-06 Vintage Phase

The JF-06 Vintage Phase by Joyo is a guitar effect pedal that beautifully re- creates the classic phaser sounds of the 70's, delivering a wide, spacey, and eerie phase effect popular among fans of Van Halen and Pink Floyd. The pedal features a single "speed" control knob, allowing users to easily dial up the in-and-out of phase tone. Technical Specifications: \- True bypass design minimizes tone loss \- Aluminum alloy casing with stoving varnish finish \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Speed Range: 0.2Hz~14Hz \- Running Current: 13mA \- Power: 6F22 9V Battery/ DC 9V adapter \- Dimensions: 11.8(L)X6.4(H)X3.8(W)cm \- Weight: 0.38KG The JF-06 Vintage Phase is designed to replicate the sound of phaser guitar effects from the 70's and 80's, offering a simple design and pedal interface. Its true bypass wiring and quality components ensure reliable performance.

JF-08 Digital Delay

The JOYO JF-08 Digital Delay Guitar Effect Pedal is designed to provide precise and detailed delay effects for guitarists. The pedal features a special filter circuit that closely reproduces the sounds of analog delay, offering a delay time range of 25ms-600ms. The true bypass design minimizes tone loss, ensuring high-quality sound output. Technical Specifications: \- Input Impedance: 500 KΩ \- Output Impedance: 10 KΩ \- Running Current: 40 mA \- Delay Time: 25-600 ms \- Voltage: 9V battery/adapter \- Dimension: 120 x 97 x 55 mm \- Net Weight: 390g \- Material: Aluminum alloy with stoving varnish finish The pedal is equipped with controls for adjusting delay time, delay repeats, and the delay level, providing guitarists with precise control over their delay effects. The LED power indicator allows for easy monitoring of the pedal's status. The JOYO JF-08 Digital Delay Guitar Effect Pedal is suitable for a wide range of musical styles and use-cases, offering guitarists the ability to add depth and dimension to their playing with its versatile delay capabilities.

Dr J Shadow Echo

The Dr J Shadow Echo D54 is an effect pedal designed to create spooky slapback delays and deep echoes. It features familiar parameters such as Time, Feedback, and Level with an additional function knob, as well as Depth and Speed knobs. The LED light indicates the use of additional functions. The pedal is equipped with True Bypass design to minimize tone loss. The dimensions of the pedal are 38 x 96 x 88mm, and it weighs 350g. The model number for this pedal is Dr J D-54 Shadow Echo.

Ironman Quattro Digital Delay

The Ironman Quattro Digital Delay by Joyo, model JF-318, is a compact and versatile guitar effects pedal designed for professional use. It offers four distinct delay modes: COPY, ANALOG, MODULATION, and FILTERED, providing a wide range of delay effects to suit various musical styles and preferences. The maximum delay time achievable with the Ironman Quattro Digital Delay is precisely 958.3 milliseconds. The COPY mode delivers a standard digital delay sound, closely replicating the original signal. In contrast, the ANALOG mode emulates the classic Bucket Brigade Device (BBD) effect, producing degraded delays with reduced high frequencies and a more smeared sound. The MODULATION mode introduces a chorusing effect to the delays, creating a wider and deeper sound, particularly suitable for clean, atmospheric tones. The FILTERED mode routes the guitar signal through an adjustable mid-frequency filter before applying the delay, offering unique tonal possibilities. The pedal features compact dimensions of 73mm (L) x 43mm (W) x 50mm (H) and weighs approximately 220-300g. It operates on a standard 9V DC power supply, making it suitable for integration into pedalboard setups. The Ironman Quattro Digital Delay is equipped with controls for Delay Time, Feedback, and Mix ratio of wet and dry signals, allowing precise adjustment of the delay effects. Additionally, it features true bypass switching for transparent signal routing when the effect is disengaged. Overall, the Ironman Quattro Digital Delay is a powerful and compact pedal that offers a diverse range of delay effects, making it suitable for both studio recording and live performance applications.

D-Seed II Stereo Delay Pedal

The D-Seed II Stereo Delay Pedal by Joyo is a versatile digital delay pedal designed for guitarists and musicians. It offers the following technical specifications and features: \- Stereo input and stereo output for enhanced spatial effects \- 8 delay modes, supporting a maximum delay time of 2000ms \- Controllers for Type, Time beat or Looper, FX, Level, Feedback or Looper Tone, PingPong toggle, Favorite or REC/DUB, Bypass or PLAY/STOP \- Tap Tempo function for setting the delay time with precision \- Looper function with up to 3.5 minutes of recording time \- Favorite function to save and recall favorite tones \- Toggle switch for stereo PingPong effect \- Various delay effects including Space, LO-FI, Filter, Tape, Copy, Analog, Modulation, and Reverse \- Compact dimensions of 105 x 46 x 105mm and a weight of 555g \- Power supply requirement: 9V DC center negative, not battery-powered \- Input impedance: 2.2M, Output impedance: 100M \- Current draw: 220mA The pedal is suitable for a wide range of musical styles and use-cases, providing musicians with a versatile tool for creating unique and expressive delay effects.

R Series R-10 Nascar Delay

The Joyo R Series R-10 Nascar Delay is an analog delay pedal designed to deliver warm and natural vintage delay tones. The pedal features classic controls including Delay, Feedback, and Mix, and is built with analog circuitry. The specific technical specifications are as follows: \- Dimensions: 125(L) x 78.5(W) x 48(H) mm \- Weight: 388g \- Input Impedance: 1MΩ \- Output Impedance: 470Ω \- Rated Current Consumption: 30mA \- Delay Time: Approximately 500 ms \- Power Requirement: 9V DC Centre Negative Power Supply (Not Included) The R-10 Nascar Delay is suitable for guitarists seeking vintage delay sounds at an affordable price point. It is ideal for creating sentimental guitar solos and emulating vintage tape echo-like sounds. The pedal is designed to provide a warm and natural sound, making it a versatile tool for musicians looking to enhance their performances with classic delay effects.

R Series R-07 Aquarius Delay and Looper

The JOYO R Series R-07 Aquarius Delay and Looper is a versatile guitar effect pedal designed for professional use. It features 8 multi-mode digital delay effects and a 5-minute looper, which can be used simultaneously. The pedal offers the following delay modes: Digital Delay, Analog Delay, Tape Echo, Tube Echo, Reverse Echo, Low Bit, Galaxy, and Mod. The Tap Tempo button allows for adjusting the delay speed between repeats. The pedal's controls include Volume, Level, Time, Feedback, and Delay Mode Selector. It has input and output sockets, as well as a DC input (negative polarity inside, 160 mA current consumption) for a 9V DC power supply (not included). The dimensions of the pedal, including pots, are 109 x 67 x 48 mm, and it weighs 248g. The casing is made of metal alloy. Additionally, the R-07 Aquarius features LED ambient lighting with three modes: 'Sync' to the footswitch, 'Always', and 'Off'. The R Series pedals from JOYO also include ambient LED lighting that can be toggled from a switch on the rear of the pedal. The pedal is part of the 4th generation of guitar effects from JOYO and is designed to provide high-quality delay and looping capabilities for guitarists.

JF-08 Digital Delay

The JOYO JF-08 Digital Delay Guitar Effect Pedal is designed to provide precise and detailed delay effects for guitarists. The pedal features a special filter circuit that closely reproduces the sounds of analog delay, offering a delay time range of 25ms-600ms. The true bypass design minimizes tone loss, ensuring high-quality sound output. Technical Specifications: \- Input Impedance: 500 KΩ \- Output Impedance: 10 KΩ \- Running Current: 40 mA \- Delay Time: 25-600 ms \- Voltage: 9V battery/adapter \- Dimension: 120 x 97 x 55 mm \- Net Weight: 390g \- Material: Aluminum alloy with stoving varnish finish The pedal is equipped with controls for adjusting delay time, delay repeats, and the delay level, providing guitarists with precise control over their delay effects. The LED power indicator allows for easy monitoring of the pedal's status. The JOYO JF-08 Digital Delay Guitar Effect Pedal is suitable for a wide range of musical styles and use-cases, offering guitarists the ability to add depth and dimension to their playing with its versatile delay capabilities.

JF-13 AC Tone

The JOYO JF-13 AC Tone is a vintage tube amplifier effects pedal designed to reproduce the classic British rock sound of a Vox AC30 amplifier. The pedal features an aluminum alloy casing with a stoving varnish finish, providing durability and a sleek appearance. Key technical specifications include: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running Current: 6mA \- Power: 9V DC adapter or 9V Battery \- Dimensions: 120(L) x 97(W) x 55(H) mm \- Weight: 390g The JF-13 AC Tone pedal offers level and drive controls that provide an incredible range, allowing users to achieve the famous VOX AC-30 tone. The distortion produced by the pedal is warm and natural, with a focus on subtlety. Additionally, the pedal features a 3-band EQ for added flexibility in shaping the sound. With its 6 knobs, the pedal allows complete control over pedal dynamics, making it suitable for guitar players seeking to blend new and old tones. The unique "Voice" control enables users to dial in never-before-heard tones, adding to the pedal's versatility. Overall, the JOYO JF-13 AC Tone is a high-quality pedal that captures the warmth and natural overdrive characteristic of classic British rock sounds, making it a valuable addition to any pedal chain for guitarists looking to achieve a wide range of tones.

JF-36 Sweet Baby

The JF-36 Sweet Baby by Joyo is a low-gain overdrive pedal designed to adapt to various overdrive styles with its special Focus knob. It features a true bypass design and offers the following technical specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running Current: 5mA \- Power: 6F22 9V Battery/DC 9V adapter \- Dimensions: 118mm (L) x 68mm (W) x 50mm (H) \- Weight: 200g The pedal is suitable for enhancing guitar tones, particularly in blues and low-gain overdrive styles. It allows for adjustments in distortion degree, style, and output level, catering to the specific needs of the user. The JF-36 Sweet Baby is designed to provide dynamic overdrive effects while maintaining a compact and lightweight form factor for ease of use.

Baatsin

The Baatsin by Joyo is an 8-in-1 overdrive and distortion pedal that combines classic vintage pedals into one unit. It features 8 legendary analog overdrives, including T.OD, Sweety, B Boost, T808, OverDrive 1, Crunchy, Rioter, and OC Drive. The pedal allows users to achieve a wide range of tones from fat and warm drives to the gain of a distortion pedal with instant tap selection. Technical Specifications: \- Dimensions: 128mm x 78mm x 48mm \- Weight: 290g \- Input Impedance: 470k \- Output Impedance: 470k \- Rated Current: 30mA \- True Bypass \- Rugged Aluminum Alloy Casing \- Powered by 9V AC Adapter (not included) The Baatsin pedal is designed with a true bypass and features a rugged aluminum alloy casing. It has a rated current draw of 30mA and requires a 9V AC adapter for power. The pedal is part of the Revolution series from JOYO, featuring ambient LED lighting that can be toggled with three different modes.

JF-02 Ultimate Drive

The JF-02 Ultimate Drive by Joyo is a versatile overdrive pedal designed to deliver a wide range of tonal possibilities. It features a unique overdrive circuit that sets it apart from traditional diode clipping circuits, allowing it to create more headroom, tube amplifier sound quality effects, subtle changes in volume, and complex harmonic space effects. Key Technical Specifications: \- Controls: The pedal features Gain, Tone, and Level controls, providing precise manipulation over the overdrive effect. \- EQ Options: It includes a toggle switch for a high/low mid-spectrum EQ cut, offering flexibility in shaping the tone. \- Construction: The JF-02 Ultimate Drive is housed in a sturdy aluminum alloy casing, ensuring durability for extended use. \- True Bypass: The pedal is equipped with true bypass switching, minimizing signal loss when the effect is disengaged. \- Power: It can be powered using a 9V battery or a standard Boss-style power adapter. Dimensions: \- Length: 11.8 cm \- Height: 6.4 cm \- Width: 3.8 cm \- Weight: 0.38 kg The JF-02 Ultimate Drive is suitable for guitarists seeking a versatile overdrive pedal with a unique circuit design, precise tone shaping capabilities, and robust construction. Its ability to produce a wide range of overdriven tones makes it suitable for various musical styles and performance settings.

R-01 Tauren Overdrive

The R-01 Tauren Overdrive by Joyo has the following technical specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 560Ω \- Rated Current Consumption: 25mA \- Working Voltage: DC 9V (center minus) \- Power Supply: Only supports external power supply, with no battery compartment The pedal features controls for Volume, Gain, and Tone. It is designed to provide a warm, transparent overdrive that adds dynamic gain to the signal without altering the tone of the guitar. The R-01 Tauren Overdrive is suitable for adding a clean boost, transparent overdrive, and warm overdrive/distortion to your tone. Additionally, the R-01 Tauren Overdrive is part of the R Series, or Revolution series from JOYO, which features ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lighting has three modes: SYNC mode, ALWAYS mode, and OFF mode.

JF-04 High Gain Distortion

The JF-04 High Gain Distortion by Joyo is a guitar effects pedal designed to deliver hard distortion suitable for a wide range of musical styles, from classic rock to heavy metal. The pedal features dedicated Gain, Treble, Mid, and Volume control knobs for precise tone shaping, allowing users to achieve a variety of tones from Metallica's tight metal attack to the crunch of AC/DC. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 11mA \- Power: 6F22 9V Battery/ DC 9V adapter (not included) \- True Bypass design The pedal is housed in an aluminum alloy casing with a stoving varnish finish, ensuring durability for extended use. It features a bright LED indicator for easy visibility on stage. The pedal's dimensions are 120(L)X 97(W)X 55(H) mm, and it weighs 380g. The JF-04 High Gain Distortion pedal is equipped with a dual-band EQ, allowing for precise sculpting of rock guitar tones. Whether users seek more throat and mid-bass or prefer a scooped mid sound, the pedal offers flexibility in tone customization. Overall, the JF-04 High Gain Distortion pedal from Joyo is designed to provide high-quality distortion effects, making it suitable for guitarists looking to achieve powerful and dynamic tones for various musical applications.

R-Series R-02 Taichi

The R-Series R-02 Taichi by Joyo is a low-gain overdrive pedal designed to deliver a smooth and classic amp sound for electric guitars. It features precise controls for Volume, Gain, Tone, and Voice, allowing for versatile sound shaping. The pedal has an input impedance of 2.2MΩ and an output impedance of 1MΩ. It operates on a rated current consumption of 20mA and requires a working voltage of DC 9V (center minus). The pedal's dimensions are 109mm x 67mm x 48mm, and it weighs 248g. It is housed in a durable aluminum alloy casing with a classic stove varnish finish. The R-02 Taichi is equipped with ambience LED lights on the front and rear sides, offering customizable illumination settings. Additionally, it features a LED light control switch with SYNC mode and ALWAYS mode options. The Taichi Overdrive pedal is known for its ability to produce extremely light overdrive sounds at lower settings, reminiscent of tube amps set low, while retaining warmth and smoothness. At higher settings, it can achieve increased gain and sustain, edging on low distortion tones while retaining warmth and open harmonics. The package includes the JOYO R-02 Taichi Overdrive Pedal and a user's manual. Users are advised to ensure that their guitar is fully connected with the pedal and meets the working current requirement to avoid unexpected noise.

R-Series R-17 Dark Flame

The Joyo R-Series R-17 Dark Flame is a modern metal high gain distortion guitar effects pedal designed for both guitar riffs and solos. It offers three types of crunchy distortion selectable via a toggle switch. The pedal features a 3-Band EQ with controls for Treble, Mid, and Bass, allowing for precise tonal shaping. The dimensions of the pedal are 125 x 79 x 48 mm, and it weighs 300 g. The input and output are both 6.3 mm jacks, and the power requirement is 9V DC (negative center). The pedal operates on a running current of no information available. The R-17 Dark Flame is housed in a durable metal enclosure and features a true bypass design for transparent signal routing when the effect is disengaged. It does not support battery operation and requires a separate 9V DC mains adapter, which is not included. This pedal is suitable for a wide range of musical styles, particularly modern metal, and offers versatile distortion options for guitarists seeking a powerful and dynamic sound.

JF-17 Extreme Metal

The JOYO JF-17 Extreme Metal is a distortion guitar effect pedal designed for high-gain drive with a modern design and diverse features. It is housed in an aluminum alloy casing with a stoving varnish finish, providing durability and a sleek appearance. Key technical specifications include: \- Input Impedance: 1MΩ \- Output Impedance: 600Ω \- Running Current: 25mA \- Dimensions: 11.8(L) x 8.7(H) x 3.8(W) cm \- Weight: 0.5kg \- Power: Uses a 9V battery or 9V AC adapter \- Features a powerfully-adjustable 3-band EQ and sweep Mid-Freq knob for strong low frequency and clear, transparent high frequency tones \- Bypass switch design \- True bypass design for noise reduction The pedal is suitable for creating rhythms and leads that cut through the mix, making it ideal for musicians seeking a high-gain distortion effect with precise tonal control.

JF-01 Vintage Overdrive Pedal

The JF-01 Vintage Overdrive Pedal by Joyo is a representation of the classic Tube Screamer, featuring a RC4558 chip. The overdrive effect is described as mellow, mild, and smooth, with nice sustain. The pedal is designed with a true bypass to minimize tone loss and is housed in an aluminum alloy casing with a stoving varnish finish. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 7mA \- Power: 6F22 9V Battery/ DC 9V adapter (None included) \- Dimensions: 120(L)X 72(W)X 55(H) mm \- Weight: 290g The pedal features three control functions: volume (output), drive (gain), and tone (treble boost or cut, focused around the 2-5k range). It can produce warm overtones when used as a clean volume boost and achieve a harsher distortion as the gain is increased. The JF-01 Vintage Overdrive Pedal is suitable for guitarists looking for a classic overdriven tube amp sound and is well-regarded for its quality and affordability. For optimal performance and to avoid unexpected noise, it is recommended to use a JOYO original power adapter or a reliable alternative that meets the current operating requirements of the pedal.

JF-01 Vintage Overdrive

The Joyo JF-01 Vintage Overdrive is a representation of the classic Tube Screamer, featuring an RC4558 chip. The overdrive effect is described as mellow, mild, and smooth, providing exquisite sustain. The pedal is designed with true bypass functionality to minimize tone loss. It is housed in an aluminum alloy casing with a stoving varnish finish. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 7mA \- Power: 6F22 9V Battery/DC 9V adapter (not included) \- Controls: Volume (output), Drive (gain), Tone (treble boost or cut, focused around the 2-5k range) \- Dimensions: 120mm (length) x 72mm (width) x 55mm (height) \- Weight: 0.84 lbs The pedal features three control functions: volume (output), drive (gain), and tone (treble boost or cut, focused around the 2-5k range). The circuit features a JRC4588 chip and true bypass design.

Jf-35 Pocket Metal

The JOYO JF-35 Pocket Metal is a compact distortion pedal designed to deliver huge metal distortion sounds in a mini-sized package. The pedal features a mid adjustment knob, allowing users to sculpt their sound and find instant inspiration. The true bypass design minimizes tone loss, providing transparent tone. The pedal is housed in an aluminum alloy casing with a stoving varnish finish, ensuring stability and durability. Technical Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running Current: 13mA \- Power: 6F22 9V Battery or DC 9V adapter (not included) \- Dimensions: 118mm (L) x 68mm (W) x 50mm (H) \- Weight: 200g It is equipped with a simple control interface, making it easy to dial in the desired distortion levels. The JOYO JF-35 Pocket Metal is suitable for both studio recording and live performances, offering a portable solution for achieving powerful metal distortion effects.

JF-16 British Sound

JF-14 American Sound

The JOYO JF-14 American Sound is an effect pedal designed to reproduce the sound of a Fender 57 Deluxe amp. It offers a range of features and specifications for various use-cases. Here are the technical details: \- Aluminum alloy casing with stoving varnish finish \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running current: 3.8mA \- Powered by: 1 * 6F22 9V battery or DC 9V center negative adapter (not included) \- Effect pedal size: 12cm * 9cm * 5.5cm \- Effect pedal weight: 394g The pedal is capable of reproducing the smooth, subtle overdrive expected from Fender-style tube amps near full volume. It can also function as a clean boost, providing more liquid/sonic gold, compression, and fatness not typically heard from a pedal. The true-bypass wiring ensures that the tone remains unaffected when the pedal is switched off. The JF-14 American Sound also features inbuilt cabinet emulation, allowing direct connection to a mixing desk, DAW, or computer/laptop with a jack to USB lead. This makes it suitable for use as a DI, and it can serve as a backup in case of amp failure during a gig. The pedal offers a 3-band EQ for adjusting low, middle, and high frequencies, as well as controls for voice (frequency response and distortion), drive (gain control), and level (output level). Overall, the JOYO JF-14 American Sound is a versatile pedal suitable for guitarists looking to achieve the classic Fender clean sound, warm tones, and overdriven tweedy sound.

R-03 UZI

The JOYO R-03 UZI is a distortion pedal specially designed for heavy metal, characterized by high gain. It features a BIAS knob that allows users to switch easily between American Distortion and British Distortion. The pedal is equipped with a GAIN Control Knob and a VOLUME Control Knob, both of which are dynamically balanced. When adjusting the GAIN knob without adjusting the VOL knob, the signal from the circuit will automatically adjust, ensuring the volume remains consistent. Key Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 200Ω \- Rated Current Consumption: 20mA \- Working Voltage: DC 9V (center minus) Controls: \- Volume \- Gain \- Bias \- Low \- Mid \- High \- LED Toggle Other Features: \- True Bypass \- LED Mod (Sync, Always, Off) \- Battery powered: No The R-03 UZI is suitable for creating a wide range of heavy metal distortion tones, from crunch to fat and intense lead sounds. It is designed to be used with electric guitars and offers versatile classic distortion capabilities.

R Series R-11 Baatsin Overdrive & Distortion

The Joyo R Series R-11 Baatsin Overdrive & Distortion pedal is a versatile effects pedal designed for electric guitarists seeking a wide range of classic overdrive and distortion tones. This pedal features 8 classic overdrive and distortion modes, including T.OD, Sweety, B Boost, T808, OverDrive 1, Crunchy, Rioter, and OC Drive. The pedal is housed in a rugged aluminum alloy casing, ensuring durability for extensive use in various performance settings. It operates on a 9V AC adapter (not included) and has a current draw of 30mA. The dimensions of the pedal are 128mm x 78mm x 48mm, with a weight of 290g. With true bypass functionality, the R-11 Baatsin pedal allows for seamless integration into a pedalboard setup, minimizing signal interference when the effect is disengaged. The controls on the pedal include Volume, Tone, and Gain, providing users with precise adjustments to tailor their desired overdrive and distortion tones. The pedal's design and functionality make it suitable for a wide range of musical styles, from blues and rock to heavier genres requiring high-gain distortion. Whether used for solo performances, studio recordings, or live gigs, the R-11 Baatsin offers guitarists a comprehensive selection of classic analog overdrive and distortion effects in a single, compact unit.

JF-15 California Sound

The JF-15 California Sound by Joyo is a guitar effect pedal designed to emulate the sound of the Mesa Boogie MKII amplifier, providing natural and focused rock tones. The pedal features an aluminum alloy casing with a stoving varnish finish, giving it durability and a sleek appearance. Technical Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Current Draw: 3mA \- Power: 9V DC adapter or 9V Battery \- Dimensions: 118mm (L) x 87mm (W) x 38mm (H) \- Weight: 460g The JF-15 California Sound pedal offers 6 adjusting knobs for complete sound control, allowing users to tailor their tone to their preferences. It is suitable for guitarists seeking the classic high-gain roar of a Mesa Boogie amp in a compact and portable pedal format.

JF-03 Crunch Distortion

The JOYO JF-03 Crunch Distortion is a guitar effect pedal designed to replicate the sound of a cranked-up Marshall amplifier. It offers a classic British rock tone with great touch responsiveness and dynamics. The pedal features true bypass wiring and high-quality components, ensuring minimal tone loss. Key Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 10 kΩ \- Current Draw: 7mA \- Power: 9V DC adapter or 9V Battery \- Weight: 280g \- Dimensions: 11.8(L) x 6.4(H) x 3.8(W) cm Features: \- Classic British rock tone \- Very touch responsive \- Great dynamics \- Controls for gain, tone, and volume \- Aluminum alloy casing with stoving varnish finish \- True bypass design minimizes tone loss The JF-03 Crunch Distortion is suitable for a wide range of use-cases, from producing brilliant clean boosts to achieving the sound of a cranked-up full stack. It is versatile, offering tones reminiscent of AC/DC, Guns N' Roses, Ozzy Osbourne, Iron Maiden, and Metallica.

R Series R-01 Tauren Overdrive

The Joyo R Series R-01 Tauren Overdrive is a guitar effect pedal designed to deliver a range of overdrive tones. It is based on the Klon Centaur circuit and offers a clean boost, transparent overdrive, and warm overdrive/distortion. The pedal features volume, gain, and tone controls, allowing for precise adjustment of the overdrive effect. Technical Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 560Ω \- Rated current consumption: 25mA \- Working Voltage: DC 9V (center minus) The pedal is housed in a rugged aluminum alloy casing and features true bypass switching for preserving the integrity of the guitar signal when the effect is bypassed. It is powered by a 9V AC adapter (not included). The R-01 Tauren Overdrive is suitable for a variety of musical styles and can be used in both studio and live performance settings to add character and warmth to the guitar tone.

R Series R-04 Zip Amp Overdrive

The Joyo R Series R-04 Zip Amp Overdrive is a versatile pedal designed to deliver strong compression overdrive tones, making it suitable for lovers of instrumental rock, hard rock, and glam metal. The pedal features controls for Low, High, Volume, and Drive, allowing users to adjust the EQ and push the overdriven tones further. It also includes a toggle switch to control the compression from normal to compressed mode. The R-04 Zip Amp is part of the Revolution series from JOYO, featuring ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lights have three modes: "Sync" to the footswitch, "Always on," and "Off." Technical Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1M Ohms \- Output Impedance: 200 Ohms \- Rated Current: 20mA \- Voltage: 9V Centre Negative power supply The pedal is housed in a tough metal shell with a glossy appearance and true bypass functionality. It operates on a 9V power supply and is designed to provide a balanced and powerful preamp overdriven tone with compression control.

R Series R-03 Uzi Distortion

The JOYO R Series R-03 Uzi Distortion pedal is specially designed for heavy metal and is characterized by high gain. It features a BIAS knob that allows users to switch easily between American Distortion and British Distortion. The pedal also includes a GAIN Control Knob and a VOLUME Control Knob, both of which are dynamically balanced, ensuring that the signal from the circuit adjusts automatically to maintain consistent volume levels. The pedal offers the following controls: Volume, Gain, Bias, Low, Mid, High, and LED Toggle. It does not have a battery compartment. The dimensions of the pedal are 109mm x 67mm x 48mm, and it weighs 248g. The input impedance is 1M, the output impedance is 200, and the rated current is 20mA. The pedal operates on a 9v Centre Negative power supply. The Uzi Distortion pedal provides a versatile range of classic distortion, from crunch to fat and intense lead sounds, making it suitable for various heavy metal applications. Additionally, it features ambient LED lighting that can be toggled from a switch on the rear of the pedal, with three modes of lighting available. Overall, the JOYO R Series R-03 Uzi Distortion pedal offers a powerful and versatile distortion effect, with precise controls and dynamic balancing to cater to the needs of heavy metal guitarists.

R Series R-12 Band Controller EQ

The JOYO R Series R-12 Band Controller EQ is a 10-band EQ effect pedal suitable for both bass and guitar. It covers a frequency band ranging from 31.25Hz to 16kHz, accommodating 4-string, 5-string bass, and 6-string, 7-string guitar. The pedal features an independent volume control knob on the right side, with related LED lights on each knob that flicker accordingly. The pedal is designed with an aluminum housing and true bypass functionality. The input impedance is 1M and the output impedance is 100. The rated current consumption is 30mA. The pedal does not have a battery compartment.

JF-11 6-Band EQ

The JOYO JF-11 6-Band EQ pedal is designed to provide precise control over the guitar's tone. It features six frequency bands: 100Hz, 200Hz, 400Hz, 800Hz, 1.6kHz, and 3.2kHz, each offering a range of ±18dB for fine-tuning the sound. The pedal is equipped with a true bypass design to minimize tone loss when not in use. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 15mA \- Power: 6F22 9V Battery/ DC 9V adapter (not included) \- Dimensions: 120 x 72 x 55 mm \- Net Weight: 290g \- Material: Aluminum alloy casing with stoving varnish finish The pedal is suitable for guitarists looking to shape their sound with precision and is housed in a durable and compact aluminum alloy casing. It is designed to be used in conjunction with electric guitars and offers musicians the ability to sculpt their tone across a wide frequency range.

R-03 UZI

The JOYO R-03 UZI is a distortion pedal specially designed for heavy metal, characterized by high gain. It features a BIAS knob that allows users to switch easily between American Distortion and British Distortion. The pedal is equipped with a GAIN Control Knob and a VOLUME Control Knob, both of which are dynamically balanced. When adjusting the GAIN knob without adjusting the VOL knob, the signal from the circuit will automatically adjust, ensuring the volume remains consistent. Key Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 200Ω \- Rated Current Consumption: 20mA \- Working Voltage: DC 9V (center minus) Controls: \- Volume \- Gain \- Bias \- Low \- Mid \- High \- LED Toggle Other Features: \- True Bypass \- LED Mod (Sync, Always, Off) \- Battery powered: No The R-03 UZI is suitable for creating a wide range of heavy metal distortion tones, from crunch to fat and intense lead sounds. It is designed to be used with electric guitars and offers versatile classic distortion capabilities.

R Series R-04 Zip Amp Overdrive

The Joyo R Series R-04 Zip Amp Overdrive is a versatile pedal designed to deliver strong compression overdrive tones, making it suitable for lovers of instrumental rock, hard rock, and glam metal. The pedal features controls for Low, High, Volume, and Drive, allowing users to adjust the EQ and push the overdriven tones further. It also includes a toggle switch to control the compression from normal to compressed mode. The R-04 Zip Amp is part of the Revolution series from JOYO, featuring ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lights have three modes: "Sync" to the footswitch, "Always on," and "Off." Technical Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1M Ohms \- Output Impedance: 200 Ohms \- Rated Current: 20mA \- Voltage: 9V Centre Negative power supply The pedal is housed in a tough metal shell with a glossy appearance and true bypass functionality. It operates on a 9V power supply and is designed to provide a balanced and powerful preamp overdriven tone with compression control.

R-12 Band Controller EQ

The JOYO R-12 Band Controller EQ is a 10-band EQ effect pedal suitable for both bass and guitar, with a frequency band ranging from 31.25Hz to 16kHz, including 4-string, 5-string bass, and 6-string, 7-string guitar. The pedal features an independent Volume Control Knob on the right side, with related LED lights on each knob that flicker accordingly. The pedal does not have a battery compartment.

R Series R-03 Uzi Distortion

The JOYO R Series R-03 Uzi Distortion pedal is specially designed for heavy metal and is characterized by high gain. It features a BIAS knob that allows users to switch easily between American Distortion and British Distortion. The pedal also includes a GAIN Control Knob and a VOLUME Control Knob, both of which are dynamically balanced, ensuring that the signal from the circuit adjusts automatically to maintain consistent volume levels. The pedal offers the following controls: Volume, Gain, Bias, Low, Mid, High, and LED Toggle. It does not have a battery compartment. The dimensions of the pedal are 109mm x 67mm x 48mm, and it weighs 248g. The input impedance is 1M, the output impedance is 200, and the rated current is 20mA. The pedal operates on a 9v Centre Negative power supply. The Uzi Distortion pedal provides a versatile range of classic distortion, from crunch to fat and intense lead sounds, making it suitable for various heavy metal applications. Additionally, it features ambient LED lighting that can be toggled from a switch on the rear of the pedal, with three modes of lighting available. Overall, the JOYO R Series R-03 Uzi Distortion pedal offers a powerful and versatile distortion effect, with precise controls and dynamic balancing to cater to the needs of heavy metal guitarists.

JF-07 Classic Flanger

The JOYO JF-07 Classic Flanger is a guitar effects pedal that utilizes the Bucket Brigade Device (BBD) circuit to achieve metallic flange sounds, wave- like chorus sounds, and rapid tremulous vibratos. It features four adjustable knobs that control Speed, Regain, Width, and Delay Time. The pedal is designed with a true bypass, minimizing tone loss during operation. The JF-07 Classic Flanger is housed in an aluminum alloy casing with a stoving varnish finish, providing durability and a professional appearance. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Delay Time: 0.9ms-6.4ms \- Speed Range: 0.4Hz-8Hz \- Power: 6F22 9V Battery/DC 9V adapter (not included) \- Dimensions: 11.8(L) x 3.8(W) x 8.7(H)cm \- Net Weight: 0.43kg The JF-07 Classic Flanger is suitable for guitarists seeking to incorporate flanger effects into their music, offering a range of adjustable parameters to customize the flange, chorus, and vibrato sounds to their preferences.

JF-327 Raptor Flanger

The Joyo JF-327 Raptor Flanger is a compact pedal based on a classic Bucket Brigade Design (BBD), delivering a deep and rich flanger tone. The pedal features four control parameters: Speed, Regen (Regeneration), Width, and Delay, allowing users to dial in their desired sound. The Regen control provides enhanced feedback for a more pronounced effect. The pedal is equipped with a True Bypass circuit to minimize signal loss and ensure the integrity of the guitar's original tone when the effect is not engaged. Additionally, the unique KNOB GUARD protects the pedal's settings during travel, ensuring that the desired sound is preserved. The dimensions of the Joyo JF-327 Raptor Flanger are approximately 1 1/2" W x 2 3/4" H x 1 1/2" D, and it weighs around 220g. The pedal operates on a standard 9V AC Adapter (not included) and does not support battery operation. The design of the pedal includes a flippable cover to protect the settings, and it is constructed to be sturdy and durable. The pedal's compact size and robust build make it suitable for use in various musical settings, from studio recording to live performances.

JF-12 Voodoo Octave

The JF-12 Voodoo Octave by Joyo is a versatile guitar effect pedal designed to add an octave-up effect and fuzz to the tone. It features a mid-cut switch that provides control over the tone, allowing users to experiment with different sound textures. The pedal is built with a true bypass design to minimize tone loss and is housed in an aluminum alloy casing with a stoving varnish finish, ensuring durability. Technical Specifications: \- Input Impedance: 500 Kohm \- Output Impedance: 10 Kohm \- Current Draw: 4 mA \- Power: 9V battery or adapter (optional) \- Dimensions: 120mm x 97mm x 55mm \- Weight: 390 grams \- Material: Aluminum alloy The JF-12 Voodoo Octave is suitable for guitarists looking to expand their sonic capabilities with octave-up and fuzz effects, offering a compact and durable solution for live performances and studio recordings.

Jf-12 Voodoo Octave Fuzz

R-01 Tauren Overdrive

The R-01 Tauren Overdrive by Joyo has the following technical specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 560Ω \- Rated Current Consumption: 25mA \- Working Voltage: DC 9V (center minus) \- Power Supply: Only supports external power supply, with no battery compartment The pedal features controls for Volume, Gain, and Tone. It is designed to provide a warm, transparent overdrive that adds dynamic gain to the signal without altering the tone of the guitar. The R-01 Tauren Overdrive is suitable for adding a clean boost, transparent overdrive, and warm overdrive/distortion to your tone. Additionally, the R-01 Tauren Overdrive is part of the R Series, or Revolution series from JOYO, which features ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lighting has three modes: SYNC mode, ALWAYS mode, and OFF mode.

D-Seed II Stereo Delay Pedal

The D-Seed II Stereo Delay Pedal by Joyo is a versatile digital delay pedal designed for guitarists and musicians. It offers the following technical specifications and features: \- Stereo input and stereo output for enhanced spatial effects \- 8 delay modes, supporting a maximum delay time of 2000ms \- Controllers for Type, Time beat or Looper, FX, Level, Feedback or Looper Tone, PingPong toggle, Favorite or REC/DUB, Bypass or PLAY/STOP \- Tap Tempo function for setting the delay time with precision \- Looper function with up to 3.5 minutes of recording time \- Favorite function to save and recall favorite tones \- Toggle switch for stereo PingPong effect \- Various delay effects including Space, LO-FI, Filter, Tape, Copy, Analog, Modulation, and Reverse \- Compact dimensions of 105 x 46 x 105mm and a weight of 555g \- Power supply requirement: 9V DC center negative, not battery-powered \- Input impedance: 2.2M, Output impedance: 100M \- Current draw: 220mA The pedal is suitable for a wide range of musical styles and use-cases, providing musicians with a versatile tool for creating unique and expressive delay effects.

JF-17 Extreme Metal

The JOYO JF-17 Extreme Metal is a distortion guitar effect pedal designed for high-gain drive with a modern design and diverse features. It is housed in an aluminum alloy casing with a stoving varnish finish, providing durability and a sleek appearance. Key technical specifications include: \- Input Impedance: 1MΩ \- Output Impedance: 600Ω \- Running Current: 25mA \- Dimensions: 11.8(L) x 8.7(H) x 3.8(W) cm \- Weight: 0.5kg \- Power: Uses a 9V battery or 9V AC adapter \- Features a powerfully-adjustable 3-band EQ and sweep Mid-Freq knob for strong low frequency and clear, transparent high frequency tones \- Bypass switch design \- True bypass design for noise reduction The pedal is suitable for creating rhythms and leads that cut through the mix, making it ideal for musicians seeking a high-gain distortion effect with precise tonal control.

R Series R-06 O.M.B Looper and Drum Machine

The JOYO R Series R-06 O.M.B Looper and Drum Machine is a versatile pedal designed for guitarists and musicians. It features three modes: Looper, Drum Machine, and Looper + Drum Mode. The Looper mode offers a 40-minute maximum loop time with auto-align and count-in functions, allowing for unlimited overdubbing. The Drum Machine mode provides seven genres of drum patterns with seven beat times, and the tempo of drum patterns can be set using the Tap tempo button. The O.M.B pedal also syncs recorded loops to the drum groove pattern. The pedal has independent volume knobs for the Looper and Drum modes, and it supports TAP TEMPO for adding fills and outro fills at the end of each drum pattern. The LED light control switch offers SYNC mode, ALWAYS-ON mode, and OFF mode. Technical Specifications: \- Input Impedance: 2.2MΩ \- Output Impedance: 100Ω \- Signal Bypass Type: Bypass \- Rated Current Consumption: 150mA \- Working Voltage: DC 9V (center minus) \- Power Supply: Only supports external power supply, with no battery compartment \- Dimensions: 109(L) x 67(W) x 48(H) mm \- Weight: 248g The pedal is built with a durable and compact design, making it suitable for use in various settings, from practice sessions to live performances. It offers a wide range of functionalities for guitarists and musicians looking to enhance their performances with looping and drum accompaniment.

R Series R-07 Aquarius Delay and Looper

The JOYO R Series R-07 Aquarius Delay and Looper is a versatile guitar effect pedal designed for professional use. It features 8 multi-mode digital delay effects and a 5-minute looper, which can be used simultaneously. The pedal offers the following delay modes: Digital Delay, Analog Delay, Tape Echo, Tube Echo, Reverse Echo, Low Bit, Galaxy, and Mod. The Tap Tempo button allows for adjusting the delay speed between repeats. The pedal's controls include Volume, Level, Time, Feedback, and Delay Mode Selector. It has input and output sockets, as well as a DC input (negative polarity inside, 160 mA current consumption) for a 9V DC power supply (not included). The dimensions of the pedal, including pots, are 109 x 67 x 48 mm, and it weighs 248g. The casing is made of metal alloy. Additionally, the R-07 Aquarius features LED ambient lighting with three modes: 'Sync' to the footswitch, 'Always', and 'Off'. The R Series pedals from JOYO also include ambient LED lighting that can be toggled from a switch on the rear of the pedal. The pedal is part of the 4th generation of guitar effects from JOYO and is designed to provide high-quality delay and looping capabilities for guitarists.

JF-10 Dynamic Compressor

The JOYO JF-10 Dynamic Compressor is a pedal designed to replicate the classic Ross compressor with minimal noise. It features three main controls: Sustain, Attack, and Level, allowing users to adjust the compression settings to suit their style. The Sustain control manages the duration of compression, while the Attack knob determines when compression kicks in. The Level function controls the compressed volume of the sound as it reaches the amplifier. Technical Specifications: \- Input Impedance: 500kΩ \- Output Impedance: 10kΩ \- Running Current: 8mA \- Power: 9V DC adapter or 9V Battery \- Weight: 300g \- Dimensions: 120mm (L) x 64mm (W) x 55mm (H) \- True bypass design to minimize tone loss \- Aluminum alloy casing with stoving varnish finish The pedal is designed for guitarists seeking to smooth out their sound by controlling volume peaks and dips, resulting in a consistent and wide tone. It can be used with an AC adapter or a 9V battery and features a true bypass switch to eliminate signal interference when switched off. The JOYO JF-10 Dynamic Compressor is suitable for a wide range of use-cases, from achieving mild compression to evening out overall sound on cleaner guitar tones. Its rugged aluminum alloy casing ensures durability, making it a reliable addition to any guitarist's setup.

Jf-12 Voodoo Octave Fuzz

R Series R-09 Vision Modulation

The Joyo R Series R-09 Vision Modulation is a dual-channel stereo modulation pedal designed for electric guitar effects. It offers 18 total effects, with each channel featuring 9 effects. The pedal supports stereo input and output, allowing for independent "SPEED/RATE," "CONTROL," and "DEPTH/MIX" knobs for each effect. It also includes a 3-position toggle switch for choosing the sequence of the two effects' output. The pedal features a tap tempo function, true bypass, and a rugged aluminum alloy casing. It has a current draw of 170mA and requires a DC 9V power supply (not included). The dimensions of the pedal are 130mm (L) x 110mm (W) x 50mm (H), with a weight of 425g. The modulation effects include Mod-Phase, Chorus, Stereo-Phase, Flanger, Rotary, Trem, Liquid Phase, Tri-Chorus, Opt-trem, SM-CH, Low-bit, At-Wah, Analog Flange, Octave, Stutter, and Vibrato, among others. The pedal allows for parallel or series use of any two effects, with the ability to switch between series or parallel output using a center-mounted toggle switch. It also features LED light control with SYNC, ALWAYS, and OFF modes. Specifications: \- Current: 170mA \- Sample rate: 44.1K \- Sampling accuracy: 24bit \- Signal Bypass Type: True Bypass \- Working Voltage: DC 9V (center minus) \- Power Supply: Only supports external power supply, with no battery compartment \- Input: 1/4” mono audio interface x2 (impedance 1M Ohms) \- Output: 1/4” mono audio interface x2 (impedance 100 Ohms) The package includes the JOYO R-09 pedal and a user's manual (Power Supply Adapter is NOT included).

Vision

The Vision by Joyo is a dual-channel stereo modulation guitar effect pedal that offers a wide range of modulation effects. It features two independent MODE modules containing 18 modulation effects, with each MODE A and MODE B having its own independent adjustable parameters. The pedal allows for parallel and serial chain switching and offers true bypass signal routing. The specific technical specifications of the Joyo Vision pedal are as follows: \- Input: 1/4” mono audio interface x2 (impedance 1M Ohms) \- Output: 1/4” mono audio interface x2 (impedance 100 Ohms) \- Sample rate: 44.1K \- Sampling accuracy: 24bit \- Power supply: DC 9V (center minus) \- Current: 170mA \- Dimensions: 130*110*50mm \- Weight: 425g \- Signal Bypass Type: True Bypass The pedal also features stereo inputs and outputs, making it suitable for use with stereo effects or for sending the signal to two guitar amps. Additionally, it includes a built-in Tap Tempo for setting modulation rates. The Joyo Vision pedal is part of the R Series, featuring metal housed stompboxes with ambient LED lighting. The LED lighting can be toggled between three modes: 'Sync' to the footswitch, 'Always', and 'Off'. The pedal also includes an LED effect indicator that activates when the footswitch and pedal are active. The Vision by Joyo offers a versatile and comprehensive modulation solution for guitar, bass, keyboards, and synths, making it a valuable addition to any musician's effects arsenal.

D-Seed II Stereo Delay Pedal

The D-Seed II Stereo Delay Pedal by Joyo is a versatile digital delay pedal designed for guitarists and musicians. It offers the following technical specifications and features: \- Stereo input and stereo output for enhanced spatial effects \- 8 delay modes, supporting a maximum delay time of 2000ms \- Controllers for Type, Time beat or Looper, FX, Level, Feedback or Looper Tone, PingPong toggle, Favorite or REC/DUB, Bypass or PLAY/STOP \- Tap Tempo function for setting the delay time with precision \- Looper function with up to 3.5 minutes of recording time \- Favorite function to save and recall favorite tones \- Toggle switch for stereo PingPong effect \- Various delay effects including Space, LO-FI, Filter, Tape, Copy, Analog, Modulation, and Reverse \- Compact dimensions of 105 x 46 x 105mm and a weight of 555g \- Power supply requirement: 9V DC center negative, not battery-powered \- Input impedance: 2.2M, Output impedance: 100M \- Current draw: 220mA The pedal is suitable for a wide range of musical styles and use-cases, providing musicians with a versatile tool for creating unique and expressive delay effects.

R-13 XVI

The JOYO R-13 XVI is a practical and user-friendly Octave pedal with independent Octave-up and Octave-down adjusting knobs. It features MOD effects designed by JOYO’s engineers, offering a richer tone compared to similar products from competitors. Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 2.2 MΩ \- Output Impedance: 100Ω \- Rated current: 90mA \- Voltage: 9v Centre Negative power supply The pedal features controls for mixing Sub Octave Control, Up Octave Control to adjust pitch, and Dry control to increase the input dry volume. The Modulation Control unleashes organ tones, and there is an LED Effect indicator that activates when the foot switch and pedal are active. The pedal also has a DC input on the rear. The R-13 XVI is part of the JOYO Revolution Series, featuring metal housed stompbox and ambient LED lighting that can be toggled between different modes: 'Sync' to the foot switch, 'Always', and 'Off'.

JF-12 Voodoo Octave

The JF-12 Voodoo Octave by Joyo is a versatile guitar effect pedal designed to add an octave-up effect and fuzz to the tone. It features a mid-cut switch that provides control over the tone, allowing users to experiment with different sound textures. The pedal is built with a true bypass design to minimize tone loss and is housed in an aluminum alloy casing with a stoving varnish finish, ensuring durability. Technical Specifications: \- Input Impedance: 500 Kohm \- Output Impedance: 10 Kohm \- Current Draw: 4 mA \- Power: 9V battery or adapter (optional) \- Dimensions: 120mm x 97mm x 55mm \- Weight: 390 grams \- Material: Aluminum alloy The JF-12 Voodoo Octave is suitable for guitarists looking to expand their sonic capabilities with octave-up and fuzz effects, offering a compact and durable solution for live performances and studio recordings.

Jf-12 Voodoo Octave Fuzz

JF-13 AC Tone

The JOYO JF-13 AC Tone is a vintage tube amplifier effects pedal designed to reproduce the classic British rock sound of a Vox AC30 amplifier. The pedal features an aluminum alloy casing with a stoving varnish finish, providing durability and a sleek appearance. Key technical specifications include: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running Current: 6mA \- Power: 9V DC adapter or 9V Battery \- Dimensions: 120(L) x 97(W) x 55(H) mm \- Weight: 390g The JF-13 AC Tone pedal offers level and drive controls that provide an incredible range, allowing users to achieve the famous VOX AC-30 tone. The distortion produced by the pedal is warm and natural, with a focus on subtlety. Additionally, the pedal features a 3-band EQ for added flexibility in shaping the sound. With its 6 knobs, the pedal allows complete control over pedal dynamics, making it suitable for guitar players seeking to blend new and old tones. The unique "Voice" control enables users to dial in never-before-heard tones, adding to the pedal's versatility. Overall, the JOYO JF-13 AC Tone is a high-quality pedal that captures the warmth and natural overdrive characteristic of classic British rock sounds, making it a valuable addition to any pedal chain for guitarists looking to achieve a wide range of tones.

JF-36 Sweet Baby

The JF-36 Sweet Baby by Joyo is a low-gain overdrive pedal designed to adapt to various overdrive styles with its special Focus knob. It features a true bypass design and offers the following technical specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running Current: 5mA \- Power: 6F22 9V Battery/DC 9V adapter \- Dimensions: 118mm (L) x 68mm (W) x 50mm (H) \- Weight: 200g The pedal is suitable for enhancing guitar tones, particularly in blues and low-gain overdrive styles. It allows for adjustments in distortion degree, style, and output level, catering to the specific needs of the user. The JF-36 Sweet Baby is designed to provide dynamic overdrive effects while maintaining a compact and lightweight form factor for ease of use.

Baatsin

The Baatsin by Joyo is an 8-in-1 overdrive and distortion pedal that combines classic vintage pedals into one unit. It features 8 legendary analog overdrives, including T.OD, Sweety, B Boost, T808, OverDrive 1, Crunchy, Rioter, and OC Drive. The pedal allows users to achieve a wide range of tones from fat and warm drives to the gain of a distortion pedal with instant tap selection. Technical Specifications: \- Dimensions: 128mm x 78mm x 48mm \- Weight: 290g \- Input Impedance: 470k \- Output Impedance: 470k \- Rated Current: 30mA \- True Bypass \- Rugged Aluminum Alloy Casing \- Powered by 9V AC Adapter (not included) The Baatsin pedal is designed with a true bypass and features a rugged aluminum alloy casing. It has a rated current draw of 30mA and requires a 9V AC adapter for power. The pedal is part of the Revolution series from JOYO, featuring ambient LED lighting that can be toggled with three different modes.

JF-02 Ultimate Drive

The JF-02 Ultimate Drive by Joyo is a versatile overdrive pedal designed to deliver a wide range of tonal possibilities. It features a unique overdrive circuit that sets it apart from traditional diode clipping circuits, allowing it to create more headroom, tube amplifier sound quality effects, subtle changes in volume, and complex harmonic space effects. Key Technical Specifications: \- Controls: The pedal features Gain, Tone, and Level controls, providing precise manipulation over the overdrive effect. \- EQ Options: It includes a toggle switch for a high/low mid-spectrum EQ cut, offering flexibility in shaping the tone. \- Construction: The JF-02 Ultimate Drive is housed in a sturdy aluminum alloy casing, ensuring durability for extended use. \- True Bypass: The pedal is equipped with true bypass switching, minimizing signal loss when the effect is disengaged. \- Power: It can be powered using a 9V battery or a standard Boss-style power adapter. Dimensions: \- Length: 11.8 cm \- Height: 6.4 cm \- Width: 3.8 cm \- Weight: 0.38 kg The JF-02 Ultimate Drive is suitable for guitarists seeking a versatile overdrive pedal with a unique circuit design, precise tone shaping capabilities, and robust construction. Its ability to produce a wide range of overdriven tones makes it suitable for various musical styles and performance settings.

R-01 Tauren Overdrive

The R-01 Tauren Overdrive by Joyo has the following technical specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 560Ω \- Rated Current Consumption: 25mA \- Working Voltage: DC 9V (center minus) \- Power Supply: Only supports external power supply, with no battery compartment The pedal features controls for Volume, Gain, and Tone. It is designed to provide a warm, transparent overdrive that adds dynamic gain to the signal without altering the tone of the guitar. The R-01 Tauren Overdrive is suitable for adding a clean boost, transparent overdrive, and warm overdrive/distortion to your tone. Additionally, the R-01 Tauren Overdrive is part of the R Series, or Revolution series from JOYO, which features ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lighting has three modes: SYNC mode, ALWAYS mode, and OFF mode.

R-Series R-20 King of Kings

The Joyo R-Series R-20 King of Kings is a classic vintage-style overdrive pedal with a 1+1 dual-channel design. It can be used alone or connected in series to achieve warm overdrive, heavy crunch, or vintage distortion tones. Each channel features independent diode clipping circuits and a feedback switch, allowing for nuanced tone adjustments. The pedal has dual channels with independent volume and tone controls, and it is powered by a 9V DC power supply. The dimensions of the pedal are 130 x 110 x 50 mm, and it weighs 425 g. The pedal also features true bypass functionality.

JF-04 High Gain Distortion

The JF-04 High Gain Distortion by Joyo is a guitar effects pedal designed to deliver hard distortion suitable for a wide range of musical styles, from classic rock to heavy metal. The pedal features dedicated Gain, Treble, Mid, and Volume control knobs for precise tone shaping, allowing users to achieve a variety of tones from Metallica's tight metal attack to the crunch of AC/DC. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 11mA \- Power: 6F22 9V Battery/ DC 9V adapter (not included) \- True Bypass design The pedal is housed in an aluminum alloy casing with a stoving varnish finish, ensuring durability for extended use. It features a bright LED indicator for easy visibility on stage. The pedal's dimensions are 120(L)X 97(W)X 55(H) mm, and it weighs 380g. The JF-04 High Gain Distortion pedal is equipped with a dual-band EQ, allowing for precise sculpting of rock guitar tones. Whether users seek more throat and mid-bass or prefer a scooped mid sound, the pedal offers flexibility in tone customization. Overall, the JF-04 High Gain Distortion pedal from Joyo is designed to provide high-quality distortion effects, making it suitable for guitarists looking to achieve powerful and dynamic tones for various musical applications.

R-Series R-02 Taichi

The R-Series R-02 Taichi by Joyo is a low-gain overdrive pedal designed to deliver a smooth and classic amp sound for electric guitars. It features precise controls for Volume, Gain, Tone, and Voice, allowing for versatile sound shaping. The pedal has an input impedance of 2.2MΩ and an output impedance of 1MΩ. It operates on a rated current consumption of 20mA and requires a working voltage of DC 9V (center minus). The pedal's dimensions are 109mm x 67mm x 48mm, and it weighs 248g. It is housed in a durable aluminum alloy casing with a classic stove varnish finish. The R-02 Taichi is equipped with ambience LED lights on the front and rear sides, offering customizable illumination settings. Additionally, it features a LED light control switch with SYNC mode and ALWAYS mode options. The Taichi Overdrive pedal is known for its ability to produce extremely light overdrive sounds at lower settings, reminiscent of tube amps set low, while retaining warmth and smoothness. At higher settings, it can achieve increased gain and sustain, edging on low distortion tones while retaining warmth and open harmonics. The package includes the JOYO R-02 Taichi Overdrive Pedal and a user's manual. Users are advised to ensure that their guitar is fully connected with the pedal and meets the working current requirement to avoid unexpected noise.

R Series R-05 Maximum Overdrive

\- Dimensions: 125mm x 78.5mm x 48mm \- Weight: 248g \- Input Impedance: 1M Ohms \- Output Impedance: 200 Ohms \- Rated Current: 20mA \- Voltage: 9V DC (Center Negative) Features: \- Based on the Fulltone Full Drive 2 circuit \- Volume, Gain, and Tone controls \- Independent Boost switch and controls \- MOSFET or Standard Diode switch \- 3-way clipping selector \- True Bypass \- Rugged aluminum alloy casing

JF-01 Vintage Overdrive Pedal

The JF-01 Vintage Overdrive Pedal by Joyo is a representation of the classic Tube Screamer, featuring a RC4558 chip. The overdrive effect is described as mellow, mild, and smooth, with nice sustain. The pedal is designed with a true bypass to minimize tone loss and is housed in an aluminum alloy casing with a stoving varnish finish. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 7mA \- Power: 6F22 9V Battery/ DC 9V adapter (None included) \- Dimensions: 120(L)X 72(W)X 55(H) mm \- Weight: 290g The pedal features three control functions: volume (output), drive (gain), and tone (treble boost or cut, focused around the 2-5k range). It can produce warm overtones when used as a clean volume boost and achieve a harsher distortion as the gain is increased. The JF-01 Vintage Overdrive Pedal is suitable for guitarists looking for a classic overdriven tube amp sound and is well-regarded for its quality and affordability. For optimal performance and to avoid unexpected noise, it is recommended to use a JOYO original power adapter or a reliable alternative that meets the current operating requirements of the pedal.

JF-01 Vintage Overdrive

The Joyo JF-01 Vintage Overdrive is a representation of the classic Tube Screamer, featuring an RC4558 chip. The overdrive effect is described as mellow, mild, and smooth, providing exquisite sustain. The pedal is designed with true bypass functionality to minimize tone loss. It is housed in an aluminum alloy casing with a stoving varnish finish. Technical Specifications: \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Running Current: 7mA \- Power: 6F22 9V Battery/DC 9V adapter (not included) \- Controls: Volume (output), Drive (gain), Tone (treble boost or cut, focused around the 2-5k range) \- Dimensions: 120mm (length) x 72mm (width) x 55mm (height) \- Weight: 0.84 lbs The pedal features three control functions: volume (output), drive (gain), and tone (treble boost or cut, focused around the 2-5k range). The circuit features a JRC4588 chip and true bypass design.

Jf-35 Pocket Metal

The JOYO JF-35 Pocket Metal is a compact distortion pedal designed to deliver huge metal distortion sounds in a mini-sized package. The pedal features a mid adjustment knob, allowing users to sculpt their sound and find instant inspiration. The true bypass design minimizes tone loss, providing transparent tone. The pedal is housed in an aluminum alloy casing with a stoving varnish finish, ensuring stability and durability. Technical Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running Current: 13mA \- Power: 6F22 9V Battery or DC 9V adapter (not included) \- Dimensions: 118mm (L) x 68mm (W) x 50mm (H) \- Weight: 200g It is equipped with a simple control interface, making it easy to dial in the desired distortion levels. The JOYO JF-35 Pocket Metal is suitable for both studio recording and live performances, offering a portable solution for achieving powerful metal distortion effects.

JF-16 British Sound

JF-14 American Sound

The JOYO JF-14 American Sound is an effect pedal designed to reproduce the sound of a Fender 57 Deluxe amp. It offers a range of features and specifications for various use-cases. Here are the technical details: \- Aluminum alloy casing with stoving varnish finish \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Running current: 3.8mA \- Powered by: 1 * 6F22 9V battery or DC 9V center negative adapter (not included) \- Effect pedal size: 12cm * 9cm * 5.5cm \- Effect pedal weight: 394g The pedal is capable of reproducing the smooth, subtle overdrive expected from Fender-style tube amps near full volume. It can also function as a clean boost, providing more liquid/sonic gold, compression, and fatness not typically heard from a pedal. The true-bypass wiring ensures that the tone remains unaffected when the pedal is switched off. The JF-14 American Sound also features inbuilt cabinet emulation, allowing direct connection to a mixing desk, DAW, or computer/laptop with a jack to USB lead. This makes it suitable for use as a DI, and it can serve as a backup in case of amp failure during a gig. The pedal offers a 3-band EQ for adjusting low, middle, and high frequencies, as well as controls for voice (frequency response and distortion), drive (gain control), and level (output level). Overall, the JOYO JF-14 American Sound is a versatile pedal suitable for guitarists looking to achieve the classic Fender clean sound, warm tones, and overdriven tweedy sound.

R-03 UZI

The JOYO R-03 UZI is a distortion pedal specially designed for heavy metal, characterized by high gain. It features a BIAS knob that allows users to switch easily between American Distortion and British Distortion. The pedal is equipped with a GAIN Control Knob and a VOLUME Control Knob, both of which are dynamically balanced. When adjusting the GAIN knob without adjusting the VOL knob, the signal from the circuit will automatically adjust, ensuring the volume remains consistent. Key Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 200Ω \- Rated Current Consumption: 20mA \- Working Voltage: DC 9V (center minus) Controls: \- Volume \- Gain \- Bias \- Low \- Mid \- High \- LED Toggle Other Features: \- True Bypass \- LED Mod (Sync, Always, Off) \- Battery powered: No The R-03 UZI is suitable for creating a wide range of heavy metal distortion tones, from crunch to fat and intense lead sounds. It is designed to be used with electric guitars and offers versatile classic distortion capabilities.

R Series R-11 Baatsin Overdrive & Distortion

The Joyo R Series R-11 Baatsin Overdrive & Distortion pedal is a versatile effects pedal designed for electric guitarists seeking a wide range of classic overdrive and distortion tones. This pedal features 8 classic overdrive and distortion modes, including T.OD, Sweety, B Boost, T808, OverDrive 1, Crunchy, Rioter, and OC Drive. The pedal is housed in a rugged aluminum alloy casing, ensuring durability for extensive use in various performance settings. It operates on a 9V AC adapter (not included) and has a current draw of 30mA. The dimensions of the pedal are 128mm x 78mm x 48mm, with a weight of 290g. With true bypass functionality, the R-11 Baatsin pedal allows for seamless integration into a pedalboard setup, minimizing signal interference when the effect is disengaged. The controls on the pedal include Volume, Tone, and Gain, providing users with precise adjustments to tailor their desired overdrive and distortion tones. The pedal's design and functionality make it suitable for a wide range of musical styles, from blues and rock to heavier genres requiring high-gain distortion. Whether used for solo performances, studio recordings, or live gigs, the R-11 Baatsin offers guitarists a comprehensive selection of classic analog overdrive and distortion effects in a single, compact unit.

JF-15 California Sound

The JF-15 California Sound by Joyo is a guitar effect pedal designed to emulate the sound of the Mesa Boogie MKII amplifier, providing natural and focused rock tones. The pedal features an aluminum alloy casing with a stoving varnish finish, giving it durability and a sleek appearance. Technical Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1KΩ \- Current Draw: 3mA \- Power: 9V DC adapter or 9V Battery \- Dimensions: 118mm (L) x 87mm (W) x 38mm (H) \- Weight: 460g The JF-15 California Sound pedal offers 6 adjusting knobs for complete sound control, allowing users to tailor their tone to their preferences. It is suitable for guitarists seeking the classic high-gain roar of a Mesa Boogie amp in a compact and portable pedal format.

JF-03 Crunch Distortion

The JOYO JF-03 Crunch Distortion is a guitar effect pedal designed to replicate the sound of a cranked-up Marshall amplifier. It offers a classic British rock tone with great touch responsiveness and dynamics. The pedal features true bypass wiring and high-quality components, ensuring minimal tone loss. Key Specifications: \- Input Impedance: 500 kΩ \- Output Impedance: 10 kΩ \- Current Draw: 7mA \- Power: 9V DC adapter or 9V Battery \- Weight: 280g \- Dimensions: 11.8(L) x 6.4(H) x 3.8(W) cm Features: \- Classic British rock tone \- Very touch responsive \- Great dynamics \- Controls for gain, tone, and volume \- Aluminum alloy casing with stoving varnish finish \- True bypass design minimizes tone loss The JF-03 Crunch Distortion is suitable for a wide range of use-cases, from producing brilliant clean boosts to achieving the sound of a cranked-up full stack. It is versatile, offering tones reminiscent of AC/DC, Guns N' Roses, Ozzy Osbourne, Iron Maiden, and Metallica.

R Series R-01 Tauren Overdrive

The Joyo R Series R-01 Tauren Overdrive is a guitar effect pedal designed to deliver a range of overdrive tones. It is based on the Klon Centaur circuit and offers a clean boost, transparent overdrive, and warm overdrive/distortion. The pedal features volume, gain, and tone controls, allowing for precise adjustment of the overdrive effect. Technical Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1MΩ \- Output Impedance: 560Ω \- Rated current consumption: 25mA \- Working Voltage: DC 9V (center minus) The pedal is housed in a rugged aluminum alloy casing and features true bypass switching for preserving the integrity of the guitar signal when the effect is bypassed. It is powered by a 9V AC adapter (not included). The R-01 Tauren Overdrive is suitable for a variety of musical styles and can be used in both studio and live performance settings to add character and warmth to the guitar tone.

R Series R-04 Zip Amp Overdrive

The Joyo R Series R-04 Zip Amp Overdrive is a versatile pedal designed to deliver strong compression overdrive tones, making it suitable for lovers of instrumental rock, hard rock, and glam metal. The pedal features controls for Low, High, Volume, and Drive, allowing users to adjust the EQ and push the overdriven tones further. It also includes a toggle switch to control the compression from normal to compressed mode. The R-04 Zip Amp is part of the Revolution series from JOYO, featuring ambient LED lighting that can be toggled from a switch on the rear of the pedal. The LED lights have three modes: "Sync" to the footswitch, "Always on," and "Off." Technical Specifications: \- Dimensions: 109mm x 67mm x 48mm \- Weight: 248g \- Input Impedance: 1M Ohms \- Output Impedance: 200 Ohms \- Rated Current: 20mA \- Voltage: 9V Centre Negative power supply The pedal is housed in a tough metal shell with a glossy appearance and true bypass functionality. It operates on a 9V power supply and is designed to provide a balanced and powerful preamp overdriven tone with compression control.

R Series R-03 Uzi Distortion

The JOYO R Series R-03 Uzi Distortion pedal is specially designed for heavy metal and is characterized by high gain. It features a BIAS knob that allows users to switch easily between American Distortion and British Distortion. The pedal also includes a GAIN Control Knob and a VOLUME Control Knob, both of which are dynamically balanced, ensuring that the signal from the circuit adjusts automatically to maintain consistent volume levels. The pedal offers the following controls: Volume, Gain, Bias, Low, Mid, High, and LED Toggle. It does not have a battery compartment. The dimensions of the pedal are 109mm x 67mm x 48mm, and it weighs 248g. The input impedance is 1M, the output impedance is 200, and the rated current is 20mA. The pedal operates on a 9v Centre Negative power supply. The Uzi Distortion pedal provides a versatile range of classic distortion, from crunch to fat and intense lead sounds, making it suitable for various heavy metal applications. Additionally, it features ambient LED lighting that can be toggled from a switch on the rear of the pedal, with three modes of lighting available. Overall, the JOYO R Series R-03 Uzi Distortion pedal offers a powerful and versatile distortion effect, with precise controls and dynamic balancing to cater to the needs of heavy metal guitarists.

JF-09 Tremolo

The JOYO JF-09 Tremolo Guitar Effect Pedal is designed to replicate the classic tremolo sound of vintage tube amplifiers, utilizing the same photoelectric tube circuitry. The pedal features Intensity and Rate knobs for easy adjustment of the tone and vibe, allowing users to achieve a wide range of tremolo effects. The true bypass design minimizes tone loss, ensuring a clean and unaltered signal when the pedal is disengaged. Technical Specifications: \- Input Impedance: 500k Ohms \- Output Impedance: 10k Ohms \- Delay Time: 0.9ms to 6.4ms \- Speed Range: 0.4Hz to 8Hz \- Running Current: 20mA \- Power: 9V DC adapter or 9V Battery \- Weight: 290g \- Dimensions: 118 (L) x 64 (W) x 38 (H), 60 (H incl knobs) mm \- Material: Aluminum alloy casing with stoving varnish finish The pedal is housed in an aluminum alloy casing with a stoving varnish finish, ensuring durability for extensive use. It features a silver true bypass switch, LED active light, and 1/4" jack input and output connectors. The optical LED display allows users to visualize the speed of the tremolo effect, enabling precise adjustments for different playing styles. The JOYO JF-09 Tremolo Guitar Effect Pedal is suitable for various musical genres and can be used to create shimmering tremolo effects, making it a versatile addition to any guitarist's pedalboard.

JF-06 Vintage Phase

The JF-06 Vintage Phase by Joyo is a guitar effect pedal that beautifully re- creates the classic phaser sounds of the 70's, delivering a wide, spacey, and eerie phase effect popular among fans of Van Halen and Pink Floyd. The pedal features a single "speed" control knob, allowing users to easily dial up the in-and-out of phase tone. Technical Specifications: \- True bypass design minimizes tone loss \- Aluminum alloy casing with stoving varnish finish \- Input Impedance: 500KΩ \- Output Impedance: 10KΩ \- Speed Range: 0.2Hz~14Hz \- Running Current: 13mA \- Power: 6F22 9V Battery/ DC 9V adapter \- Dimensions: 11.8(L)X6.4(H)X3.8(W)cm \- Weight: 0.38KG The JF-06 Vintage Phase is designed to replicate the sound of phaser guitar effects from the 70's and 80's, offering a simple design and pedal interface. Its true bypass wiring and quality components ensure reliable performance.

JF-08 Digital Delay

The JOYO JF-08 Digital Delay Guitar Effect Pedal is designed to provide precise and detailed delay effects for guitarists. The pedal features a special filter circuit that closely reproduces the sounds of analog delay, offering a delay time range of 25ms-600ms. The true bypass design minimizes tone loss, ensuring high-quality sound output. Technical Specifications: \- Input Impedance: 500 KΩ \- Output Impedance: 10 KΩ \- Running Current: 40 mA \- Delay Time: 25-600 ms \- Voltage: 9V battery/adapter \- Dimension: 120 x 97 x 55 mm \- Net Weight: 390g \- Material: Aluminum alloy with stoving varnish finish The pedal is equipped with controls for adjusting delay time, delay repeats, and the delay level, providing guitarists with precise control over their delay effects. The LED power indicator allows for easy monitoring of the pedal's status. The JOYO JF-08 Digital Delay Guitar Effect Pedal is suitable for a wide range of musical styles and use-cases, offering guitarists the ability to add depth and dimension to their playing with its versatile delay capabilities.

jf-328 Nebulous Phaser

The JOYO JF-328 Nebulous is a classic analog phaser pedal designed to provide precise control over phased sound. It offers features that go beyond the standard old-school phaser, allowing control over Speed, Width, and Feedback. This analog pedal is equipped with True Bypass, ensuring minimal signal interference when not in use. Technical Specifications: \- Input Impedance: 510KΩ \- Output Impedance: 470Ω \- Running Current: 20mA \- Power: DC 9V adapter (negative polarity) \- Dimensions: 73mm (L) x 43mm (W) x 50mm (H) \- Weight: Approximately 220g \- Color: Orange \- Voltage: 9 Volts \- Amperage: 20 Milliamps Use Cases: The Nebulous Phaser is suitable for guitarists and musicians seeking to add dynamic and customizable phasing effects to their sound. It can be used in various musical genres and styles, offering versatility and control over the phased sound. The JOYO JF-328 Nebulous is a compact and budget-friendly solution for achieving classic analog phaser effects with enhanced control and flexibility.

R Series R-14 Atmosphere Reverb

The Joyo R Series R-14 Atmosphere Reverb is a versatile effects pedal designed for electric guitar and bass. It features 9 built-in digital reverb types, including SPRING, CHURCH, PLATE, EKO-VERB, SHIMMER, COMET, REWIND, FOREST, and PULSE. In addition to traditional MIX, DECAY, and TONE adjustments, it offers modulation effects depth control dedicated for modulation effects. The TRAIL function switch allows the effects tone to fade out, providing a more natural transition when switching the effect on and off. The pedal has dimensions of 109*67*48mm and weighs 248g. It has an input impedance of 2.2M Ω, output impedance of 100 Ω, and a rated current consumption of 140mA. The working voltage is DC 9V (center negative).

JF-09 Tremolo

The JOYO JF-09 Tremolo Guitar Effect Pedal is designed to replicate the classic tremolo sound of vintage tube amplifiers, utilizing the same photoelectric tube circuitry. The pedal features Intensity and Rate knobs for easy adjustment of the tone and vibe, allowing users to achieve a wide range of tremolo effects. The true bypass design minimizes tone loss, ensuring a clean and unaltered signal when the pedal is disengaged. Technical Specifications: \- Input Impedance: 500k Ohms \- Output Impedance: 10k Ohms \- Delay Time: 0.9ms to 6.4ms \- Speed Range: 0.4Hz to 8Hz \- Running Current: 20mA \- Power: 9V DC adapter or 9V Battery \- Weight: 290g \- Dimensions: 118 (L) x 64 (W) x 38 (H), 60 (H incl knobs) mm \- Material: Aluminum alloy casing with stoving varnish finish The pedal is housed in an aluminum alloy casing with a stoving varnish finish, ensuring durability for extensive use. It features a silver true bypass switch, LED active light, and 1/4" jack input and output connectors. The optical LED display allows users to visualize the speed of the tremolo effect, enabling precise adjustments for different playing styles. The JOYO JF-09 Tremolo Guitar Effect Pedal is suitable for various musical genres and can be used to create shimmering tremolo effects, making it a versatile addition to any guitarist's pedalboard.

JP-02 Power Supply

The JP-02 Power Supply by Joyo is a versatile and reliable power supply unit designed for guitar pedals. It offers the following technical specifications and features: \- Ten Outputs: The power supply unit provides ten outputs, including 7x 9V @ 100mA, 1x 9V @ 500mA, 1x 12V @ 100mA, and 1x 18V @ 100mA, allowing for the simultaneous power supply of multiple pedals. \- Isolated Outputs: The outputs are isolated, providing stable and noise-free power to each connected pedal, reducing the risk of ground loop noise. \- Short-Circuit/Overcurrent Protection: The unit is equipped with built-in protection against short circuits and overcurrent, ensuring the safety of connected pedals and the power supply unit itself. \- Power Options: It supports power options for 9V, 12V, or 18V effects, catering to the diverse power requirements of different guitar pedals. \- Bright Blue LED: The power supply unit features bright blue LEDs that serve two purposes: illuminating the pedal board for visibility in dimly lit environments and acting as short-circuit warning indicators. \- Compact Design: With dimensions of approximately 158mm long (front), 55mm deep (front to back), and 33mm high (bottom to top), the JP-02 Power Supply offers a compact and space-efficient solution for pedal boards. \- Included Cable: The unit comes with the necessary link power cables, providing added convenience for users. The JP-02 Power Supply by Joyo is suitable for musicians and guitar enthusiasts who require a reliable and efficient power supply solution for their pedal setups, offering multiple isolated outputs, protection features, and flexibility to accommodate various pedal power requirements.

JF-18R Power Tune

The Joyo JF-18R Power Tune is a combination power supply and tuner pedal designed to provide essential tools for guitarists' pedalboards. The POWER section features a filtered low noise output with short circuit and over current protection. It offers six outputs providing standard 100mA power for most standard analog pedals, along with two additional outputs capable of delivering 500mA, suitable for demanding digital effects units. The TUNE section features a large LED screen with a rapid chromatic tuning algorithm, ensuring fast and responsive note detection for guitar and bass players. The tuner section also features True Bypass circuitry to minimize signal loss. Technical Specifications: \- Input: 1/4" mono port \- Output: 1/4" mono port \- Tuning Range: 12Hz-4186Hz \- Working Voltage: DC9V (Center Negative) \- Current Draw: 120mA \- Isolated outputs: 8 (6 x 100mA, 2 x 500mA) The JF-18R Power Tune is designed to save space and minimize pedal power noise issues, making it a versatile and practical addition to any guitarist's setup.

JT-305 Tuner

The JT-305 Tuner by Joyo is a pedal tuner designed for use with guitars or bass. It features a rugged black metal casing and offers the following technical specifications: \- A4 Frequency: 436-445Hz (calibrated in 1Hz steps) \- Tuning Range: A0 (27.5Hz) to C8 (4186.01Hz) \- Input impedance: 1 M-ohm (tuner on) \- Current consumption: 55mA max \- Power options: 9V battery (1) or AC adapter (9V 600mA or greater) \- Battery Life: Approximately 5 hours continuous use with tuner on (A4 input in continuous use, in meter mode) \- Weight: 430g (including battery) \- Dimensions: 76(L) x 120(H) x 46(W)mm The tuner is equipped with a large, easy-to-read LED meter with a light- emitting surface for excellent visibility in any setting. It also features true bypass wiring to preserve tone and offers four display modes including strobe and meter. The JT-305 Tuner is suitable for use in various musical settings and provides accurate tuning for both guitars and bass instruments.