Nux NSS5 IR & power amp simulator

Nux solid studio

The NUX Solid Studio IR Loader and Power Amp Simulator pedal is a versatile device designed for guitarists and musicians seeking high-quality sound reproduction and flexibility in their setups. Here are the technical specifications and features: \- Sampling Frequency: 88.2kHz \- A/D Resolution: 32 bit \- Frequency Response: 20Hz-20kHz +/- 0.5dB \- Dynamic Range: 100dB \- Latency: 0.7ms \- IR Resolution: 2048 samples (46ms) \- Input: 6.35mm mono input with input signal level toggle switch (-10dB / +4dB) \- Outputs: 3 outputs including unbalanced output of processed signal and balanced output of processed signal \- Power Supply: Requires a 9-volt power supply delivering 240mA \- Weight: Just under 500 grams The pedal offers an intuitive interface with potentiometers and switches for direct parameter control, allowing users to activate cabinet simulation and power amplifier simulation. It supports IRs with a length of up to 2048 samples, providing an excellent rendering of impulse responses. The pedal also features a micro USB connector for configuration via provided software, enabling users to load custom IRs onto the pedal. The power amp simulation offers three tube models (EL84, LE34, and 6V6) with corresponding tonal characteristics, providing flexibility in sound shaping. Additionally, the pedal provides various connection scenarios, allowing users to apply cabinet simulation to their signal, use it as a DI box, or connect it to an FX loop. Overall, the NUX Solid Studio pedal is designed to deliver high-quality sound reproduction, precise IR rendering, and flexible connectivity options for guitarists and musicians in both studio and live performance settings.

NuX CH2 Vintage Chorus

Here are the details: \- Input Impedance: 1k Ohms \- Output Impedance: 10k Ohms \- Power: 9V (9V battery) AC adaptor (negative tip) \- Dimensions: 120(L) x 64(W) x 59.5(H) mm \- Weight: 328g \- Features: Dual output jacks (one for effected signal, one for dry signal), low noise BBD delay circuit for natural, clear sound, FET switching for pop- free switching, top-loading battery change without tools, LED indicator for effect and battery status.

Mod Core

The NUX Mod Core Deluxe is a fully-featured pro-quality modulation effects pedal that offers 8 modulation effects with 2 types of algorithms, catering to various sound improvement and colorization needs. It features NUX Original TSAC Technology, 32bit DSP, and a Hi-Performance 24bit 44.1 kHz AD/DA Converter. The pedal also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass. It can be powered by a 9V battery or a 9V compatible adaptor. The pedal also supports stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. Additionally, the Mod Core Deluxe includes a physical dead-man switch, T-Lock, designed to protect parameter tweaks during performances. The pedal has been updated to include new algorithms for Chorus, Phaser, and U-Vibe effects.

Tape Core

The Tape Core Deluxe by NUX is a contemporary stomp box that offers classic Tape Echo tone. It features 3 reproduction heads yielding 7 different combinations of delay sounds. The natural sound, decay, and modulation are created with NUX's TS/AC Technology. The pedal is designed to echo the vision of professional users and is equipped with an Infinite Feedback feature that allows for classic Infinite Feedback Oscillation effects popularized by artists like Pink Floyd and The Steve Miller Band. The Tape Core Deluxe comes with a 3-way toggle-switch allowing users to change between 2 Bypass modes and NUX’s unique Tone Lock (T-Lock) function. The T-Lock mode is a physical dead-man switch designed to protect parameter tweaks during performances. The pedal also offers True Bypass, Buffered Tail Bypass, and a Tape Core Editor for customization. The specifications of the Tape Core Deluxe include: \- 7 repro head combination types and Sound on Sound type \- Nominal Input Level: -20 dBu (GUITAR) +3 dBu (Max. ) \- Input Impedance: 1 MΩ \- Nominal Output Level: -20 dBu (GUITAR) +3 dBu (Max. ) \- Output Impedance: 1 kΩ 0Ω (BYPASS) \- Residual Noise Level: -93 dBu (MIN. ) \- Current Draw: 103mA \- Power Supply: 9V Battery, or AC adaptor to the DC 9V (optional NUX ACD-006A) \- Dimensions: 122mm (L) x 72mm (W) x 47mm (H) \- Weight: 270g The Tape Core Deluxe also offers a range of supporting materials including user manuals, firmware updates, and editor software for customization.

NuX Reissue Series Analog Chorus

The NuX Reissue Series Analog Chorus pedal features the following technical specifications: \- Input Impedance: 1M Ohms \- Output Impedance: 10K Ohms \- Current Draw: < 20 mA \- Power: 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA \- Dimensions: 121(L) X 77(W) X 48(D) mm \- Weight: 230g The pedal is designed to bring back the legendary chorus sound from the 80s and is suitable for use with guitars and other musical instruments. Its sturdy metal construction and compact dimensions make it suitable for use in various musical setups, providing a classic analog chorus effect.

NuX Mod Core Deluxe

The NuX Mod Core Deluxe is a fully-featured, pro-quality modulation effects pedal designed to enhance sound colorization and improve tone shaping. It offers 8 modulation effects with normal and deluxe modes, providing a wide range of options for musicians. The pedal features Nux Original TSAC Technology, a 32bit DSP, and a high-performance 24bit 44.1 kHz AD/DA Converter, ensuring high-quality sound processing. The Mod Core Deluxe also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass for transparent signal routing. Additionally, it can be powered by a 9V battery or a 9V compatible adaptor, offering flexibility in power options. The pedal's design incorporates stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. It also includes a T-Lock function, a physical dead-man switch designed to protect parameter tweaks during performances. The Mod Core Deluxe V2 update introduces improvements to the algorithms of various effects, such as chorus, phaser, and U-Vibe, enhancing the overall performance and versatility of the pedal.

Komp Core Deluxe

The NUX Komp Core Deluxe is a multi-function analog compressor pedal designed to offer a wide variety of compressor tones. It features three different clip modes and precise knobs, providing a broad range of taste. The pedal includes Sustain, Attack, and Blend knobs, allowing for precise control over the signal, enabling users to achieve good sustain with low noise and adjust input sensitivity accurately. The Komp Core Deluxe can function as a transparent or squishy compressor, with a volume knob and a blend knob to bring in or out the original dry signal. Additionally, a simple 3-way mini toggle allows users to choose the compression intensity without sound coloration. Key Features: \- Multi-function analog compressor pedal \- Three different clip modes \- Precise knobs for a wide range of tonal options \- Sustain, Attack, and Blend knobs for signal control \- Volume and blend knobs for adjusting dry signal \- 3-way mini toggle for compression intensity selection The pedal's clip modes include Classic Compression, suitable for single-coil guitars with low output pickups, Clean Mode for smoothing the sound of humbucker pickups, and Normal Mode for mid-output pickup systems. The Komp Core Deluxe also features a blend circuit that allows users to balance the dry and wet signal, providing transparency and the option to use it as a clean boost. Specifications: \- Analog Circuit \- True Bypass \- Blend Circuit for balancing dry and wet signal \- Dimensions: (H) 58.5mm x (W) 74mm x (D) 132mm \- Weight: 10.7 ounces \- Power: 9V battery or DC 9V adapter The NUX Komp Core Deluxe offers guitarists a versatile and high-quality compressor pedal with a wide range of tonal options and precise control over the signal, making it suitable for various musical styles and applications.

Komp Core Deluxe

The NUX Komp Core Deluxe is a multi-function analog compressor pedal designed to offer a wide variety of compressor tones. It features three different clip modes and precise knobs, providing a broad range of taste. The pedal includes Sustain, Attack, and Blend knobs, allowing for precise control over the signal, enabling users to achieve good sustain with low noise and adjust input sensitivity accurately. The Komp Core Deluxe can function as a transparent or squishy compressor, with a volume knob and a blend knob to bring in or out the original dry signal. Additionally, a simple 3-way mini toggle allows users to choose the compression intensity without sound coloration. Key Features: \- Multi-function analog compressor pedal \- Three different clip modes \- Precise knobs for a wide range of tonal options \- Sustain, Attack, and Blend knobs for signal control \- Volume and blend knobs for adjusting dry signal \- 3-way mini toggle for compression intensity selection The pedal's clip modes include Classic Compression, suitable for single-coil guitars with low output pickups, Clean Mode for smoothing the sound of humbucker pickups, and Normal Mode for mid-output pickup systems. The Komp Core Deluxe also features a blend circuit that allows users to balance the dry and wet signal, providing transparency and the option to use it as a clean boost. Specifications: \- Analog Circuit \- True Bypass \- Blend Circuit for balancing dry and wet signal \- Dimensions: (H) 58.5mm x (W) 74mm x (D) 132mm \- Weight: 10.7 ounces \- Power: 9V battery or DC 9V adapter The NUX Komp Core Deluxe offers guitarists a versatile and high-quality compressor pedal with a wide range of tonal options and precise control over the signal, making it suitable for various musical styles and applications.

Time Force

The NUX Time Force is a multi-modulation digital delay pedal designed for guitar effects. It offers 11 delay effects, including analog, tape, reverse, and more, providing a wide range of tonal options. The pedal features true stereo signal processing and automatic I/O detecting circuitry, enabling flexible routing possibilities. It also includes a tail-keeping function and a kill-dry function. Key Specifications: \- Effects types: 11 modeling delay modes \- Presets: Up to 9 storable user presets plus manual mode \- Sampling frequency: 44.1kHz \- A/D converter: 24-bit \- Signal processing: 32-bit \- Frequency response: 20Hz-2000Hz ±1dB \- THD+N: 93dBu (<0.003%) A-weighting \- Dynamic range: 100dB \- Input: -20dBV @ 1Mohm \- Output: -10dBV (Output load impedance of 10Kohm or more) \- Display: 128*128 TFT \- Power: 9V DC (powered by 1 * 9V battery or adapter, neither included) \- Color: White \- Pedal size: 12.5 * 10.8 * 5.7cm / 4.9 * 4.3 * 2.2in \- Pedal weight: 400g / 14.1oz The NUX Time Force pedal also features a large color LCD panel (128*128) with a graphic interface for intuitive operation. It utilizes a new generation 32-bit DSP and high-performance 24-bit 44.1 kHz AD/DA conversion for high- quality sound processing.

Atlantic Delay & Reverb

The NUX Atlantic Delay & Reverb pedal offers versatile effects in a compact design. It features three delay modes: '70s analog, '60s tape, and '80s digital, allowing for a wide range of delay effects. The pedal also includes three reverb modes: spring, plate, and hall, with the plate reverb featuring a shimmering effect. The pedal provides controls for delay level, time, repeat, reverb level, and decay, as well as a tap tempo function with tap subdivision. It also offers true bypass and an input level switch (-10 dB / +4 dB). The NUX Atlantic pedal has a USB port for firmware updates and a TRS input for effect loop connection via insert or Y cable. In terms of connectivity, the pedal has a 6.35 mm stereo input and two stereo outputs. The dimensions of the pedal are 115 x 105 x 57 mm, and it weighs 420 g. It is powered via a 9 V DC power supply (not included).

Konsequent Digi Delay

Atlantic

The NUX Atlantic is a versatile delay and reverb pedal designed for guitar effects. It features three delay effects: 70’s Analog, 60’s Tape, and 80’s Digital, each with specific delay time ranges and characteristics. Additionally, the pedal offers three types of reverb effects: Spring, Plate, and Hall, with each type featuring a secondary effect that can be activated by holding down the reverb footswitch. The pedal includes an inside routing-control between the effects, allowing users to determine the order in which the effects are applied. This feature provides flexibility in creating unique and customizable soundscapes. The NUX Atlantic also provides a 6.35 mm stereo input and two outputs, enabling users to integrate the pedal into various effect chains via Send/Return connections using TRS cables. Furthermore, the NUX Atlantic offers smart tap tempo functionality for the delay effects, allowing for precise synchronization with the music being played. The pedal's versatile routing options and secondary functions for the reverb effects enhance its usability for a wide range of musical styles and applications. Technical Specifications: \- Delay Effects: 70’s Analog (40ms – 400ms), 60’s Tape (55ms – 550ms), 80’s Digital (80ms – 800ms) \- Reverb Effects: Spring, Plate, Hall, each with a secondary effect \- Input/Output: 6.35 mm stereo input, 2 outputs \- Control: Inside routing-control between effects \- Tap Tempo: Smart tap tempo with sub-division \- Power Requirement: 9V DC Centre Negative Power Supply The NUX Atlantic is a compact and feature-rich pedal that offers musicians a wide range of creative possibilities for enhancing their guitar sounds with high-quality delay and reverb effects.

NDD-6 duotime Dual Delay

The NUX NDD-6 Duotime Dual Delay Engine is a real stereo delay pedal with independent time/sub-division and repeat knobs. It offers analog delay, tape echo, digital delay, modulation delay, and verb delay. The pedal's technical specifications are as follows: \- Sampling rate: 48kHz \- A/D Converter: 32Bit \- Signal Processing: 32Bit \- Frequency Response: 20Hz~20kHz - ±1dB \- Maximum input level: 10dBu/2.8Vrms \- Input Impedance: 5MΩ \- System Latency: 1ms \- Maximum output level: 10dBu/2.8Vrms \- Output Impedance: 1kΩ \- Dynamic Range: 102dBu \- THD+N Ratio: 0.02%/-70dB(A-Weighting)@input 1Vrms,1kHz \- Power: 9VDC (Negative tip, Optional ACD-006A adapter) \- Current Draw: >150mA The pedal is designed to provide a compact size and ultra-simple controls, making it easy to operate. It is suitable for musicians looking for a high- quality stereo delay pedal with a wide range of delay effects.

Duo Time

The Duo Time by NUX is a stereo delay pedal with a compact size and ultra- simple controls, offering a range of delay types and features. Here are the technical specifications and details for the Duo Time by NUX: Features: \- Offers analog delay, tape echo, digital delay, modulation delay, and verb delay \- Analog Delay (40ms~402ms) based on the bucket-brigade device (BBD), discrete-time analog delay \- Tape Echo (55ms~552ms) based on RE-201 Tape Echo algorithm with NUX Core Image Technology \- Digi Delay (80ms~1000ms) based on modern digital delay algorithm with magic compression and filter \- MOD Delay (20ms ~ 1499ms) based on the Ibanez DML algorithm; a modulation delay \- VERB Delay (80ms ~1000ms) adds 3-dimensional sound with shimmer into the Plate reverb algorithm \- Control Panel with LEVEL Knob, Delay Type Selector, PARAMETER, TIME 1, REPEAT 1, TIME 2, REPEAT 2, TAP Footswitch, and OLED Display \- LOOP Mode for phrase looping with REC/PLAY/DUB and UNDO/REDO functions Specifications: \- Sampling rate: 48kHz \- A/D Converter: 32Bit \- Signal Processing: 32Bit \- Frequency Response: 20Hz~20kHz - ±1dB \- Maximum input level: 10dBu/2.8Vrms \- Input Impedance: 5MΩ \- System Latency: 1ms \- Maximum output level: 10dBu/2.8Vrms \- Output Impedance: 1kΩ \- Dynamic Range: 102dBu \- THD+N Ratio: 0.02%/-70dB(A-Weighting)@input 1Vrms,1kHz \- Power: 9VDC(Negative tip,Optional ACD-006A adapter) \- Current Draw: less than 150mA \- Dimensions: 105(L)X115(W)X58(H)mm \- Weight: 440g I/O: \- IN 1 (MONO) and IN 2 for independent control of delay 1 and delay 2 \- OUT 1 (MONO) and OUT 2 for independent output of delay 1 and delay 2 \- USB Port for firmware updates \- DC Jack: 9V Negative Tip power with 300mA Connect Applications: \- Up to 1800ms stereo delay time by Tap Tempo \- True stereo delay engine with independent controls in a compact size \- 40 seconds stereo phrase loop with OLED status display \- Optional delay time display (MS / BPM) These technical specifications and features make the Duo Time by NUX a versatile and powerful stereo delay pedal suitable for a wide range of musical applications.

Time Core

The NUX Time Core Deluxe is a digital delay effects pedal designed to offer a wide range of delay types and versatile functionality. It features up to 8 delay types, including Tap, Digital, Analog, Pan, P.Pong, Mod, and Reverse, providing users with a diverse set of delay options to create unique sounds and ambiance. The Tape mode adds a vintage flavor to classic sounds, while the Digital delay mode preserves the natural sound. The Analog mode, constructed with a bucket-brigade (BBD) device, enhances the sound with warmth and uniqueness. The pedal also includes a 40-second looper, allowing users to record phrases and solos. The Tone Lock function ensures that settings remain secure during live performances. Additionally, the Time Core Deluxe offers true bypass and USB for firmware updates. With stereo output capabilities, users can adjust the delay Ping Pong to create a stereo ambient effect or create a pan from left to right in Pan mode. The Mod delay and Reverse mode enable users to add tastier repeats and create different ambient effects, respectively. The pedal can also function as a Looper pedal in Hold mode. Technical Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 1kΩ \- Dynamic Range: 104 dB \- DSP Processing: 48KHz / 32-bit \- A/D D/A Sampling Rate: 48KHz / 24-bit \- Power: 9V (9V Battery) or AC adaptor (negative tip) \- Dimensions: 122(L) x 72(W) x 47(H)mm \- Weight: 270g The NUX Time Core Deluxe is a versatile and feature-rich digital delay effects pedal suitable for a wide range of musical applications, offering high-quality sound and advanced functionality.

Tape Core

The Tape Core Deluxe by NUX is a contemporary stomp box that offers classic Tape Echo tone. It features 3 reproduction heads yielding 7 different combinations of delay sounds. The natural sound, decay, and modulation are created with NUX's TS/AC Technology. The pedal is designed to echo the vision of professional users and is equipped with an Infinite Feedback feature that allows for classic Infinite Feedback Oscillation effects popularized by artists like Pink Floyd and The Steve Miller Band. The Tape Core Deluxe comes with a 3-way toggle-switch allowing users to change between 2 Bypass modes and NUX’s unique Tone Lock (T-Lock) function. The T-Lock mode is a physical dead-man switch designed to protect parameter tweaks during performances. The pedal also offers True Bypass, Buffered Tail Bypass, and a Tape Core Editor for customization. The specifications of the Tape Core Deluxe include: \- 7 repro head combination types and Sound on Sound type \- Nominal Input Level: -20 dBu (GUITAR) +3 dBu (Max. ) \- Input Impedance: 1 MΩ \- Nominal Output Level: -20 dBu (GUITAR) +3 dBu (Max. ) \- Output Impedance: 1 kΩ 0Ω (BYPASS) \- Residual Noise Level: -93 dBu (MIN. ) \- Current Draw: 103mA \- Power Supply: 9V Battery, or AC adaptor to the DC 9V (optional NUX ACD-006A) \- Dimensions: 122mm (L) x 72mm (W) x 47mm (H) \- Weight: 270g The Tape Core Deluxe also offers a range of supporting materials including user manuals, firmware updates, and editor software for customization.

Mod Core

The NUX Mod Core Deluxe is a fully-featured pro-quality modulation effects pedal that offers 8 modulation effects with 2 types of algorithms, catering to various sound improvement and colorization needs. It features NUX Original TSAC Technology, 32bit DSP, and a Hi-Performance 24bit 44.1 kHz AD/DA Converter. The pedal also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass. It can be powered by a 9V battery or a 9V compatible adaptor. The pedal also supports stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. Additionally, the Mod Core Deluxe includes a physical dead-man switch, T-Lock, designed to protect parameter tweaks during performances. The pedal has been updated to include new algorithms for Chorus, Phaser, and U-Vibe effects.

Metal Core

Metal Core by NUX is a high-gain preamp pedal designed to deliver heavy metal tones. It features three classic high-gain amp models, including Duo Rect, Fireman, and VH4 modes, utilizing NUX’s TSAC-HD amp modeling algorithm for realistic response and amp-like reactivity to playing and attack. The pedal allows users to save preset settings for each mode, enabling easy switching between preamp rigs without adjusting settings. Technical Specifications: \- Brand: NUX \- Model: Metal Core Deluxe \- Sampling Rate: 512 \- Power Consumption: <100mA \- Display: LED & LED Segment Displays \- Power: 9V DC Centre Negative pin or 9V battery \- Dimensions: 12.2 x 7.2 x 4.7cm / 4 13⁄16” X 2 13⁄16” X 1 7⁄8” \- Weight: 270g / 9.5lbs The Metal Core Deluxe pedal responds well to boosts and drives into the front end, providing tight, chunky metal tones. Additionally, it can be used straight into an FRFR speaker, front-of-house PA/mixer, or power amp, and features an inbuilt IR for cab simulation, allowing for an ampless setup while maintaining a high-gain tone.

NuX Mod Core Deluxe

The NuX Mod Core Deluxe is a fully-featured, pro-quality modulation effects pedal designed to enhance sound colorization and improve tone shaping. It offers 8 modulation effects with normal and deluxe modes, providing a wide range of options for musicians. The pedal features Nux Original TSAC Technology, a 32bit DSP, and a high-performance 24bit 44.1 kHz AD/DA Converter, ensuring high-quality sound processing. The Mod Core Deluxe also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass for transparent signal routing. Additionally, it can be powered by a 9V battery or a 9V compatible adaptor, offering flexibility in power options. The pedal's design incorporates stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. It also includes a T-Lock function, a physical dead-man switch designed to protect parameter tweaks during performances. The Mod Core Deluxe V2 update introduces improvements to the algorithms of various effects, such as chorus, phaser, and U-Vibe, enhancing the overall performance and versatility of the pedal.

JTC Drum & Loop Pro

The NUX JTC Drum & Loop Pro (NDL-5) is an advanced pedal designed for musicians seeking simplified controls and versatile functionality. It features a dual-switch stomp box with 6 hours of recording capability and 256 loop track memories. The pedal offers the following technical specifications and features: \- 24-bit audio quality \- 6 hours of recording time \- 256 loop track memories \- Drum styles include 25 4/4 beats, 10 3/4 drum beats, and 5 shuffle beats \- Drum tempo ranges from 40 to 240 BPM \- Two start modes and three stop modes for performance flexibility \- One Shot player functionality \- Two loop switch modes: Record-Play and Record-Overdub \- Optional drum sound enhancement \- Two outputs, with the option for speaker emulation on the Right Output \- Three output modes: Guitar to L and Drums to R, Guitar and Drums to R/L, Guitar to R and Drums to L \- External footswitch input for switching between loop phrases (NMP-2 optional) \- Micro-B USB input \- 9V negative tip power input Additionally, the pedal allows users to load their favorite songs and backing tracks in 24-bit / 44.1kHz Stereo WAVE (.wav) format for playing along. The NUX JTC Drum & Loop Pro is a versatile tool for musicians looking to enhance their performances with loop creation, drum accompaniment, and song playback capabilities.

Loop Core

The Loop Core Deluxe by NUX is a versatile looper pedal designed for modern musicians. It offers the following technical specifications and features: \- Recording Time: Up to 8 hours of recording time with unlimited layers in 24-bit high-resolution audio quality into 99 saved memories. \- Drum Rhythms: Includes 40 different drum rhythms covering various genres such as rock, pop, blues, and jazz. \- Stop Modes: Offers three different stop modes - Normal Mode (double tap for instant stop), Finish Mode (plays until the end of the last measure), and Fade Out Mode (10 seconds fade-out). \- Importing and Backing Up: Allows users to connect the Loop Core Deluxe to a PC/Mac with a Mini-B USB connector to import available loop phrases or back up their own. It is compatible with 24-bit/44.1kHz WAV files. \- Frequency Compensation & Cabinet Simulation: Designed with frequency compensation for drums and a cabinet simulator, utilized through the stereo output jacks. \- Stereo Output Connection: Detects the type of devices connected and outputs the original guitar tone and loop phase to the guitar amplifier while the drum machine sound outputs to the mixer. \- Bypass Modes: Features switchable buffer bypass and true bypass, providing flexibility for different setups. \- Automatic Tempo Detection: Automatically processes the tempo to match the drum pattern, allowing users to lay down a loop without a metronome or drum patterns. \- Comparison with Original Loop Core: Offers better recording sound quality (24-bit vs. 16-bit), longer recording time (8 hours vs. 6 hours), upgraded drum machine with more realistic drum sounds, and includes the NMP-2 Dual Footswitch control pedal. \- Specifications: \- Sampling Rate: 44.1KHz \- A/D Converter: 24-bit \- Signal Processing: 24-bit \- Frequency Response: 20Hz - 20KHz \- Noise Level: -98dBu \- Dynamic Range: 101dB \- Power Consumption: 65mA - 70mA \- Input: Mono \- Outputs: Amplifier Out, Mixer Out (Cabinet Simulated) \- Display: LED & LED Segment Displays \- Power: 9V DC Negative Tip / 9V Battery \- Dimensions: 122(L) x 72(W) x 47(H) mm \- Weight: 270g The Loop Core Deluxe also offers support for firmware updates and includes the Nux Audio Converter software for converting audio files to make them compatible with the pedal.

NuX NCH-5 Super Chorus Flanger & Pitch

The NuX NCH-5 Super Chorus Flanger & Pitch is a versatile modulation pedal that offers a wide range of features and capabilities. Here are the technical specifications and key features: Technical Specifications: \- Input Impedance: 1MOHMS \- Output Impedance: 10kOHMS \- Dynamic Range: 103 dB \- DSP Processing: 48KHz / 32-bit \- A/D D/A Sampling Rate: 48KHz / 24-bit \- Power: 9V DC (Negative tip, Optional ACD-008 adapter) \- Current Draw: Less than 100mA \- Dimensions: 94(L)X51(W)X53(H)mm \- Weight: 175g Key Features: \- Tribute to the legendary modulation pedal~SCF \- Chorus, P.M., FLG \- Mini enclosure \- Wide dynamic range: 103dB \- Smart Tap Tempo \- True-bypass or Buffer-bypass (Trails) \- Supports Stereo \- Analog dry signal for low noise and zero latency The pedal offers a tribute to the TC Electronic’s Stereo Chorus Flanger, combining analog and digital technologies to achieve a perfect combination of both worlds. It provides a wide dynamic range, smart tap tempo, and supports stereo operation. The pedal also offers true-bypass or buffer-bypass (trails) functionality and features an analog dry signal for low noise and zero latency.

Nux mighty plug mp2

MG-200

The MG-200 by NUX is a versatile multi-effects processor designed to provide a wide range of features and functionalities for guitarists. Here are the technical specifications and details for the MG-200: Features: \- Total of 55 models, with up to 8 usable simultaneously \- 13 classic amp models with true simulation of analog circuit (TSAC) technology \- Vintage 3-band passive EQ modeling for every amp model \- 6-band graphic EQ designed specifically for electric guitar (100Hz, 200Hz, 400Hz, 800Hz, 1.6kHz, 3.2kHz) \- 12 cabinet models provided \- Built-in drum machine with CD quality PCM sounds \- 56 drum patterns including rock, pop, funk, jazz, etc., and metronome \- Up to 70 seconds phrase loop with sound on sound, adding more playability \- AUX IN jack for practicing with MP3, CDs, and other inputs \- Large color TFT LCD panel (160x128), with a graphic interface for easy and intuitive operation \- A total of 72 presets (36 factory + 36 user presets) \- New generation 32-bit DSP, high performance 24Bit 44.1kHz AD/DA converter \- Runs on batteries and AC adaptor, with six AA/LR6 alkaline batteries providing continuous use for 8 hours Functionality: \- Dynamics / Filter: Offers a variety of filter options to shape and control sound with compressors, noise gates, filters, 6-band graphic EQ, and wah effects \- Overdrive / Distortion: Allows users to create their drive tone by selecting boosters, overdrives, fuzzes, and lead guitar sounds \- Amp / Cabinets: Features 13 selected amps and cabinets, including simulations of classic tube and solid-state amps powered by NUX TS/AC Technology \- Modulation: Enhances sound with phasers, flangers, chorus, pitch shift, tremolo, and vibrato \- Delay / Reverb: Provides delay and natural-sounding reverbs, including rooms, halls, plates, springs, and tape delay simulators, designed to add depth and spaciousness to sound \- Tuner: Instantly accessible, fast, and accurate tuning Design: \- Multi-functional 3 footswitches for preset switching, drum and looper control \- One assignable control footswitch "CTRL 1" for quick access to functions like booster, TAP TEMPO, or any selected function to engage/disengage \- Loop Station with Drum Machine: Realistic-sounding drums playing patterns in various music genres, allowing users to record up to 40 seconds loop track with the selected drum style Specifications: \- Sampling frequency: 44.1 kHz \- AD/DA conversion: 24bit \- Frequency Response: 20Hz-20000Hz ± 1dB \- THD+N: -93dBu (<0.003%) \- Dynamic Range: 110dB \- Input: -20dB \- Output: -10dB \- Power: DV 9V \- Dimensions: 240(L) x 155(W) x 67(D) mm \- Weight: 0.95kg The MG-200 offers a comprehensive set of features, high-quality sound, and a portable design, making it a valuable addition to any guitarist's setup.

MG-100

The NUX MG-100 is a multi-effects modeling guitar processor designed to enhance guitar performance and sound capabilities. It offers a comprehensive range of features and specifications: \- 13 classic amp and 11 speaker cabinet models powered by NUX TS/AC Technology \- A total of 58 effects, with the ability to use up to 8 simultaneously \- 3-band vintage EQ modeling for every amp model \- 6-band graphic EQ \- User-friendly interface with a high-quality TFT LCD display \- Realistic drum sounds and 56 drum rhythms \- Up to 40 seconds phrase loop with unlimited overdubs \- Tap Tempo functionality \- Auxiliary Input \- Large color TFT LCD panel (160 x128) with a graphic interface \- A total of 72 presets, including 36 factory presets and 36 user presets \- New generation 32-bit DSP and high-performance 24Bit 44.1kHz AD/DA converter \- Runs on batteries and AC adaptor (ACD-007A), with up to 8 hours of continuous use on six AA/LR6 alkaline batteries The MG-100 also features an onboard chromatic tuner, dynamics/filter options, overdrive/distortion effects, amp/cabinet simulations, modulation effects, and delay/reverb options. Additionally, it includes a built-in expression pedal that can be used as a volume pedal or assigned to control selected parameters in real time. This multi-effects processor is suitable for a wide range of use-cases, from live performances to studio recording, and offers guitarists the flexibility to explore and create diverse sounds and tones.

Mod Core

The NUX Mod Core Deluxe is a fully-featured pro-quality modulation effects pedal that offers 8 modulation effects with 2 types of algorithms, catering to various sound improvement and colorization needs. It features NUX Original TSAC Technology, 32bit DSP, and a Hi-Performance 24bit 44.1 kHz AD/DA Converter. The pedal also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass. It can be powered by a 9V battery or a 9V compatible adaptor. The pedal also supports stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. Additionally, the Mod Core Deluxe includes a physical dead-man switch, T-Lock, designed to protect parameter tweaks during performances. The pedal has been updated to include new algorithms for Chorus, Phaser, and U-Vibe effects.

Nux MG-30 multi effect

The NUX MG-30 is a versatile guitar multi-effects pedal designed for guitar, bass, and acoustic amplification. It features 25 electric guitar amp models, 3 bass amp models, and 2 acoustic amp models, providing a wide range of tonal options for various musical styles. Key Technical Specifications: \- Design: Floorboard \- Modeling: 25 amps, 8 guitar cab IRs, 8 bass amp IRs, 8 microphone IRs, 3 microphone positions, 3 acoustic guitar IRs, 8 combinable effect blocks \- Tuner: Yes \- Drum machine: Yes \- Expression pedal: Yes \- Inputs: 6.3 mm jack \- Outputs: 2x 6.3 mm Jack \- MIDI: Yes \- USB Port: Yes \- Headphone Jack: Yes \- Dimensions (WxHxD): 313 x 54 x 166 mm \- Weight: 1.5 kg \- Power supply: 9 Volt DC Center negative \- Power Consumption: 400 mA \- Battery powered: Does not run on Battery power \- Country of Origin: China \- Special Features: Memory locations for Friend IRs, editor software, global 3-band EQ \- Included: Mains adapter The pedal is equipped with two powerful NXP RT processors, driving 1024 samples Impulse Response resolution with ultra-low system latency, ensuring tight and fast response. It also offers an intuitive user interface with a large colorful LCD and a 5-way encoder for quick editing, signal block routing, and jack setting. The NUX MG-30 is suitable for use in the studio, at home, or on stage, catering to the needs of demanding players with its comprehensive set of features and high-quality amp modeling capabilities.

NuX Mod Core Deluxe

The NuX Mod Core Deluxe is a fully-featured, pro-quality modulation effects pedal designed to enhance sound colorization and improve tone shaping. It offers 8 modulation effects with normal and deluxe modes, providing a wide range of options for musicians. The pedal features Nux Original TSAC Technology, a 32bit DSP, and a high-performance 24bit 44.1 kHz AD/DA Converter, ensuring high-quality sound processing. The Mod Core Deluxe also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass for transparent signal routing. Additionally, it can be powered by a 9V battery or a 9V compatible adaptor, offering flexibility in power options. The pedal's design incorporates stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. It also includes a T-Lock function, a physical dead-man switch designed to protect parameter tweaks during performances. The Mod Core Deluxe V2 update introduces improvements to the algorithms of various effects, such as chorus, phaser, and U-Vibe, enhancing the overall performance and versatility of the pedal.

Vintage Overdrive OD-3 Pedal

The NUX Vintage Overdrive OD-3 Pedal is a classic overdrive pedal designed to deliver warm, natural tube overdrive sound with a wide range. It features three control knobs for Level, Drive, and Tone, along with a True Bypass switch for transparent tone. The pedal has an input impedance of 1MO and an output impedance of 10KO. It can be powered by a 9V battery or a 9V AC adapter. The dimensions of the pedal are 121mm (L) x 77mm (W) x 48mm (D), and it weighs 230g. The input and output are both ¼” jacks. The pedal is known for its high build quality and classic Tube Screamer sound with additional high- end emphasis.

NOD-1 Horseman

The NUX NOD-1 Horseman Overdrive pedal is a compact and versatile effects pedal designed for guitarists. It features two independent distortion sounds, Gold Mode and Silver Mode, offering transparent/clear overdrive and extended gain range, respectively. The pedal is crafted with an OP-AMP voltage converter circuit, providing access to higher harmonics and creating the signature sound. The pedal can also function as a clean boost with little to no gain dialed in. Key Specifications: \- Input Impedance: 1MΩ \- Output Impedance: 10KΩ \- Working Current: 20mA \- Power: 9V center negative DC supply, 90mA current draw \- Dimensions: 94mm (L) x 53mm (W) x 51mm (H) \- Weight: 174g The pedal offers intuitive operation with controls for Gain, Treble, and Output, allowing users to adjust the intensity of the effect, tailor the brightness of the tone, and control the overall master volume. Additionally, it can run in either true bypass or buffered bypass mode, providing flexibility in signal routing.

Morning Star

The Morning Star by NUX is an overdrive pedal designed to deliver warm and fuzzy overdrive tones with a treble boost option. It is based on the classic Blues Breaker pedal, enhanced with additional features. The pedal's dimensions are 94mm (L) x 51mm (W) x 53mm (H) or 3.7 inches (L) x 2.0 inches (W) x 2.08 inches (H), and it weighs 174g (6 oz). Key technical specifications include: \- Input Impedance: 1M ohm \- Output Impedance: 1K ohm \- Power Input: Standard 9V DC, center negative, >100mA (power supply not included) The Morning Star pedal offers a drive knob that provides balanced overdrive to clean tones, with the ability to increase gain for thicker overdrive. The tone control allows for a wide range of tonal adjustments, from dark to bright. Additionally, the pedal features a Shine circuit that can be engaged to boost high-frequencies for added tone brightness. The Morning Star pedal provides two bypass options: True Bypass or Buffer Bypass, catering to different signal chain requirements. It also offers the flexibility to select between True Bypass (Red LED indicator) or Buffer Bypass (Green LED indicator) modes.

Lacerate FET Boost

Nux Scream Bass Overdrive

The Nux Scream Bass Overdrive is an analog overdrive pedal specifically designed for bassists. It features an analog circuit to ensure a natural overdrive tone and offers a broad tonal range from light overdrive to fuzz. The pedal includes simple Low, High, Level, and Gain knobs for convenient use, allowing users to achieve the desired tone. Additionally, it is equipped with a Blend control to balance overdrive and dry signals. The pedal operates on 9V power (9V battery) or AC adapter (not included) and features a true bypass design. The dimensions of the Nux Scream Bass Overdrive are 122(L) x 72(W) x 47(H)mm, and it weighs 270g.

Drive Core

The Drive Core by NUX is an analog overdrive effects pedal designed for electric guitar. It offers versatile functionality and precise control over the signal with the following features and specifications: \- 100% analog circuit \- True Bypass for seamless integration with other effects \- 3 tone modes selection for shaping the sound \- Power: 9V (9V battery) or AC adaptor (negative tip) \- Dimensions: 122(L) x 72(W) x 47(H)mm \- Weight: 270g \- Input Impedance: 1M Ohms \- Output Impedance: 10K Ohms The pedal can be used as a clean boost, overdrive, or a mix of clean and driven signals, offering a wide range of tonal possibilities. It features a 3-way toggle switch for quick and easy switching between clean boost, drive, and mix modes. The Drive Mode Knob allows precise control over the drive gain parameters, from low-gain to high-gain settings. The Drive Core is suitable for a variety of musical styles and can be used both as a stand-alone pedal or in combination with other gear. Its compact and durable design makes it suitable for live performances and studio recording.

Mod Core

The NUX Mod Core Deluxe is a fully-featured pro-quality modulation effects pedal that offers 8 modulation effects with 2 types of algorithms, catering to various sound improvement and colorization needs. It features NUX Original TSAC Technology, 32bit DSP, and a Hi-Performance 24bit 44.1 kHz AD/DA Converter. The pedal also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass. It can be powered by a 9V battery or a 9V compatible adaptor. The pedal also supports stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. Additionally, the Mod Core Deluxe includes a physical dead-man switch, T-Lock, designed to protect parameter tweaks during performances. The pedal has been updated to include new algorithms for Chorus, Phaser, and U-Vibe effects.

NuX Mod Core Deluxe

The NuX Mod Core Deluxe is a fully-featured, pro-quality modulation effects pedal designed to enhance sound colorization and improve tone shaping. It offers 8 modulation effects with normal and deluxe modes, providing a wide range of options for musicians. The pedal features Nux Original TSAC Technology, a 32bit DSP, and a high-performance 24bit 44.1 kHz AD/DA Converter, ensuring high-quality sound processing. The Mod Core Deluxe also includes upgraded hardware for ultra-low noise, a Tone Lock function to freeze settings and save one preset, and true bypass for transparent signal routing. Additionally, it can be powered by a 9V battery or a 9V compatible adaptor, offering flexibility in power options. The pedal's design incorporates stereo inputs and outputs for a better experience and flexible routing, allowing it to be used in any effect chains with different connection methods. It also includes a T-Lock function, a physical dead-man switch designed to protect parameter tweaks during performances. The Mod Core Deluxe V2 update introduces improvements to the algorithms of various effects, such as chorus, phaser, and U-Vibe, enhancing the overall performance and versatility of the pedal.

Nux mighty plug mp2

Metal Core

Metal Core by NUX is a high-gain preamp pedal designed to deliver heavy metal tones. It features three classic high-gain amp models, including Duo Rect, Fireman, and VH4 modes, utilizing NUX’s TSAC-HD amp modeling algorithm for realistic response and amp-like reactivity to playing and attack. The pedal allows users to save preset settings for each mode, enabling easy switching between preamp rigs without adjusting settings. Technical Specifications: \- Brand: NUX \- Model: Metal Core Deluxe \- Sampling Rate: 512 \- Power Consumption: <100mA \- Display: LED & LED Segment Displays \- Power: 9V DC Centre Negative pin or 9V battery \- Dimensions: 12.2 x 7.2 x 4.7cm / 4 13⁄16” X 2 13⁄16” X 1 7⁄8” \- Weight: 270g / 9.5lbs The Metal Core Deluxe pedal responds well to boosts and drives into the front end, providing tight, chunky metal tones. Additionally, it can be used straight into an FRFR speaker, front-of-house PA/mixer, or power amp, and features an inbuilt IR for cab simulation, allowing for an ampless setup while maintaining a high-gain tone.

Atlantic Delay & Reverb

The NUX Atlantic Delay & Reverb pedal offers versatile effects in a compact design. It features three delay modes: '70s analog, '60s tape, and '80s digital, allowing for a wide range of delay effects. The pedal also includes three reverb modes: spring, plate, and hall, with the plate reverb featuring a shimmering effect. The pedal provides controls for delay level, time, repeat, reverb level, and decay, as well as a tap tempo function with tap subdivision. It also offers true bypass and an input level switch (-10 dB / +4 dB). The NUX Atlantic pedal has a USB port for firmware updates and a TRS input for effect loop connection via insert or Y cable. In terms of connectivity, the pedal has a 6.35 mm stereo input and two stereo outputs. The dimensions of the pedal are 115 x 105 x 57 mm, and it weighs 420 g. It is powered via a 9 V DC power supply (not included).

Atlantic

The NUX Atlantic is a versatile delay and reverb pedal designed for guitar effects. It features three delay effects: 70’s Analog, 60’s Tape, and 80’s Digital, each with specific delay time ranges and characteristics. Additionally, the pedal offers three types of reverb effects: Spring, Plate, and Hall, with each type featuring a secondary effect that can be activated by holding down the reverb footswitch. The pedal includes an inside routing-control between the effects, allowing users to determine the order in which the effects are applied. This feature provides flexibility in creating unique and customizable soundscapes. The NUX Atlantic also provides a 6.35 mm stereo input and two outputs, enabling users to integrate the pedal into various effect chains via Send/Return connections using TRS cables. Furthermore, the NUX Atlantic offers smart tap tempo functionality for the delay effects, allowing for precise synchronization with the music being played. The pedal's versatile routing options and secondary functions for the reverb effects enhance its usability for a wide range of musical styles and applications. Technical Specifications: \- Delay Effects: 70’s Analog (40ms – 400ms), 60’s Tape (55ms – 550ms), 80’s Digital (80ms – 800ms) \- Reverb Effects: Spring, Plate, Hall, each with a secondary effect \- Input/Output: 6.35 mm stereo input, 2 outputs \- Control: Inside routing-control between effects \- Tap Tempo: Smart tap tempo with sub-division \- Power Requirement: 9V DC Centre Negative Power Supply The NUX Atlantic is a compact and feature-rich pedal that offers musicians a wide range of creative possibilities for enhancing their guitar sounds with high-quality delay and reverb effects.

Nux Strum Tuner

The NUX Strum Tuner is a multi-string guitar and bass pedal tuner designed with a variety of features and technical specifications. It offers three display modes: Classic needle type, Strobe, and Polyphonic tuner. The tuner provides two exciting tuning modes: Strum (polyphonic) or Chromatic, with an intelligent switch for polyphonic tuning and single string tuning. It also supports drop D tuning, flat tuning, and has an A4 frequency range. Technical Specifications: \- Tuning Range: A0 (27.5Hz) - C8 (4186Hz) \- Tuning Mode: Chromatic, Polyphonic \- A4 Range: 436Hz - 445Hz \- Tuning Precision: ±0.5Hz \- Input Impedance: 1k Ohms \- Output Impedance: 10k Ohms \- Power: 9V (9V battery) ACD-007A (negative tip) \- Dimensions: 122(L) x 72(W) x 47(H)mm \- Weight: 260g The NUX Strum Tuner features true bypass circuitry, allowing for quick switching without latency or loss of tonality. It is compatible with both guitar and bass instruments, and its LED matrix display ensures clear visibility from any position on stage. With rapid response display and high tuning accuracy, the NUX Strum Tuner provides an efficient and accurate tuning experience for musicians.

Drive Core

The Drive Core by NUX is an analog overdrive effects pedal designed for electric guitar. It offers versatile functionality and precise control over the signal with the following features and specifications: \- 100% analog circuit \- True Bypass for seamless integration with other effects \- 3 tone modes selection for shaping the sound \- Power: 9V (9V battery) or AC adaptor (negative tip) \- Dimensions: 122(L) x 72(W) x 47(H)mm \- Weight: 270g \- Input Impedance: 1M Ohms \- Output Impedance: 10K Ohms The pedal can be used as a clean boost, overdrive, or a mix of clean and driven signals, offering a wide range of tonal possibilities. It features a 3-way toggle switch for quick and easy switching between clean boost, drive, and mix modes. The Drive Mode Knob allows precise control over the drive gain parameters, from low-gain to high-gain settings. The Drive Core is suitable for a variety of musical styles and can be used both as a stand-alone pedal or in combination with other gear. Its compact and durable design makes it suitable for live performances and studio recording.