Super Chorus

P-1

The Pete Cornish P-1 is the world's first double-isolated fuzz or distortion pedal. It is designed to deliver a fat, high-gain, searing lead sound, making it ideal for solos and heavy rock rhythm work. The pedal features a high impedance RFI rejecting input and bypass buffer, which is hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish. The input to the P-1 is a high impedance, unity gain, class A, buffer preamp with superior RFI rejecting capability, eliminating radio station interference. It also has a low impedance audio output, allowing the use of extended cable runs in bypass mode. The pedal incorporates a second unity gain, class A, buffer that isolates the fuzz or overdrive section from the clean bypass section, preventing "Ghost Distortion" in bypass mode. The tone facility on the P-1 provides treble boost when set clockwise and bass boost when set counterclockwise. Settings in-between provide varying amounts of high and low frequency boosting. The pedal is housed in a rugged die-cast box with chicken-head pointer knobs and a heavy-duty all-metal footswitch with a hi-brite, low power consumption LED. The P-1 allows for easy battery replacement via a removable drawer and also features an input for a DC adapter. The preferred battery type is MN1604, and the adapter should be noise-free, fully stabilized at 9V DC, and capable of supplying 20mA. The pedal's dimensions are 171 x 121 x 55 mm. The unit comes with a warranty of twelve months from the date of purchase, covering repairs of any original manufacturing fault. For more information, please visit the official Pete Cornish website.

G-2

The Pete Cornish G-2™ is a highly acclaimed distortion unit designed for guitarists in the rock arena. It features a four-stage overdriven discrete transistor Class A circuit with additional Germanium components, producing warmer sounding harmonics. The G-2™ is known for preserving the original guitar sound and dynamics, creating a more musical effect than other distortion pedals. Key Features: \- Four-stage overdriven discrete transistor Class A circuit with additional Germanium components \- High Impedance, Unity Gain, Class A, Buffer Preamp with superior RFI rejecting capability \- Low Impedance output for extended cable runs in bypass mode \- Rugged die-cast box with lined control knobs \- Heavy-duty custom-made all-metal footswitch with large cap and protection ring, plus Hi-Brite LED \- Easy battery replacement via a removable "drawer" \- Input for a DC adapter (5.5/2.1mm, center pin negative, 9V DC, 20mA) \- Hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish \- Dimensions: 171 x 121 x 55 mm / 6.75 x 4.75 x 2.2 inches Warranty Details: \- Built using the finest available components and constructed to the highest standards \- Twelve-month warranty from the date of purchase for original manufacturing faults \- Warranty void if guarantee labels are damaged or removed \- Warranty does not apply to customer's own equipment connected to the unit The G-2™ is recommended to be fed into a clean, full-frequency response amplifier for optimal performance. It is designed to provide a higher level of overdrive, starting at the rhythmic crunch stage and progressing to a rounded but dynamic lead, reminiscent of classic cranked up Marshall sounds found in British rock records of the 70s.

P-2

P-1

The Pete Cornish P-1 is the world's first double-isolated fuzz or distortion pedal. It is designed to deliver a fat, high-gain, searing lead sound, making it ideal for solos and heavy rock rhythm work. The pedal features a high impedance RFI rejecting input and bypass buffer, which is hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish. The input to the P-1 is a high impedance, unity gain, class A, buffer preamp with superior RFI rejecting capability, eliminating radio station interference. It also has a low impedance audio output, allowing the use of extended cable runs in bypass mode. The pedal incorporates a second unity gain, class A, buffer that isolates the fuzz or overdrive section from the clean bypass section, preventing "Ghost Distortion" in bypass mode. The tone facility on the P-1 provides treble boost when set clockwise and bass boost when set counterclockwise. Settings in-between provide varying amounts of high and low frequency boosting. The pedal is housed in a rugged die-cast box with chicken-head pointer knobs and a heavy-duty all-metal footswitch with a hi-brite, low power consumption LED. The P-1 allows for easy battery replacement via a removable drawer and also features an input for a DC adapter. The preferred battery type is MN1604, and the adapter should be noise-free, fully stabilized at 9V DC, and capable of supplying 20mA. The pedal's dimensions are 171 x 121 x 55 mm. The unit comes with a warranty of twelve months from the date of purchase, covering repairs of any original manufacturing fault. For more information, please visit the official Pete Cornish website.

G-2

The Pete Cornish G-2™ is a highly acclaimed distortion unit designed for guitarists in the rock arena. It features a four-stage overdriven discrete transistor Class A circuit with additional Germanium components, producing warmer sounding harmonics. The G-2™ is known for preserving the original guitar sound and dynamics, creating a more musical effect than other distortion pedals. Key Features: \- Four-stage overdriven discrete transistor Class A circuit with additional Germanium components \- High Impedance, Unity Gain, Class A, Buffer Preamp with superior RFI rejecting capability \- Low Impedance output for extended cable runs in bypass mode \- Rugged die-cast box with lined control knobs \- Heavy-duty custom-made all-metal footswitch with large cap and protection ring, plus Hi-Brite LED \- Easy battery replacement via a removable "drawer" \- Input for a DC adapter (5.5/2.1mm, center pin negative, 9V DC, 20mA) \- Hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish \- Dimensions: 171 x 121 x 55 mm / 6.75 x 4.75 x 2.2 inches Warranty Details: \- Built using the finest available components and constructed to the highest standards \- Twelve-month warranty from the date of purchase for original manufacturing faults \- Warranty void if guarantee labels are damaged or removed \- Warranty does not apply to customer's own equipment connected to the unit The G-2™ is recommended to be fed into a clean, full-frequency response amplifier for optimal performance. It is designed to provide a higher level of overdrive, starting at the rhythmic crunch stage and progressing to a rounded but dynamic lead, reminiscent of classic cranked up Marshall sounds found in British rock records of the 70s.

P-2

NG-2

The Pete Cornish NG-2 is a battery-free fuzz pedal designed to simulate "Imminent Amp Death." It features several separate stages that allow the user to tune it to their desired degree of 'I.A.D.' The first stage is a Linear DRIVE with up to +27dB of gain feeding the second stage, a stabilized "Germanium" preamp which overloads smoothly when overdriven. The third stage simulates a tube amp that has been underbiased or has suffered serious tube or output transformer failure, providing a unique sound just before the fuse blows. The SUSTAIN control adjusts the signal level into the third section and can be adjusted from 'Tired Output Tubes' to 'Melted Tubes and Shorted Output Transformer.' TONE and VOLUME controls complete the ensemble to allow matching to the bypassed signal. Features: \- High Impedance RFI rejecting input and bypass buffer \- Hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish \- Housed in a rugged die-cast box with 'Chicken-Head' pointer knobs \- Heavy-duty custom-made all-metal footswitch with Hi-Brite LED \- Input for a DC adaptor: 5.5/2.1mm coax connector, center pin negative, 9V DC, 20mA \- Dimensions: 145 X 95 X 49 mm \- Warranty: Two years from the date of purchase for original manufacturing faults The NG-2 is designed for guitarists looking for a unique and customizable fuzz pedal that can deliver a wide range of tones, from subtle overdrive to extreme fuzz, replicating the sound of a failing tube amp.

TB-83

The Pete Cornish TB-83 is a treble boost pedal designed to enhance the tone and overdrive characteristics of low-gain amplifiers, particularly the "Normal Channel" in vintage Vox AC30s. Here are the technical specifications and features: 1\. Design and Use-Cases: \- Originally designed as an interface between Burns Tri-Sonic pickups and the "Normal" input on vintage Vox AC30 amplifiers. \- Also performs well with other low-gain amps lacking built-in treble boost. 2\. Construction: \- Each unit is independently hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish. \- Modular design allows for replaceable parts if damaged. \- Active circuitry is potted in semi-flexible resin for protection against environmental conditions and microphonic feedback. 3\. Technical Specifications: \- Maximum output: +10dBm \- Measured output noise with a 10KΩ source impedance: -82dBm, providing a signal-to-noise ratio of 92dB. \- Input for a DC adaptor with specific requirements for voltage, polarity, and current supply. \- Rugged die-cast housing with a Hi-Brite "Power ON" LED. \- Dimensions: 121 x 66 x 40 mm 4\. Battery Information: \- Battery life: Approximately 500 hours with a low current consumption of approximately 540μA. \- Supplied with a Duracell "Procell" MN1604 battery. 5\. Warranty: \- Covered by a two-year warranty against original manufacturing faults. Each pedal is individually numbered, signed, and dated internally, providing full traceability and history.

SS-3

The Pete Cornish SS-3 is a highly regarded pedal known for its exceptional features and performance. The SS-3 is designed to provide a wide range of overdriven vintage valve amp sounds, making it suitable for crunchy rhythm and thick bluesy lead tones. It is favored by renowned musicians such as Noel Gallagher of Oasis and David Gilmour of Pink Floyd. Key Technical Specifications: \- Dimensions: 171 x 121 x 55 mm / 6.75 x 4.75 x 2.2 inches \- Input: High Impedance, Unity Gain, Class A, Buffer Preamp with RFI rejecting capability \- Output: Low Impedance Audio output \- Controls: Bass, Treble, HI-CUT, LO-CUT \- Construction: Hand built, wired, and tested by Pete, Lynda, and Mingus Cornish \- Housing: Rugged Die-cast box with lined control knobs \- Footswitch: Heavy Duty Custom made all-metal footswitch with large cap and protection ring plus Hi-Brite LED \- Power: Easy battery replacement via a removable "drawer" or input for a DC adapter (5.5/2.1mm, center pin negative) \- Warranty: 12 months from the date of purchase, covering original manufacturing faults The SS-3's unique design includes a High Impedance load presented to the guitar, allowing the pickups to operate optimally even when multiple effects units are connected after the SS-3. The pedal's controls, including Bass, Treble, HI-CUT, and LO-CUT, offer precise tonal shaping and harmonic content adjustments. Additionally, the SS-3 features an input for a DC adapter, with specific voltage and current requirements for optimal performance. The pedal is recommended to be powered by noise-free, fully stabilized 9V DC adapters capable of supplying 20mA. The SS-3 is housed in a rugged die-cast box with lined control knobs and a heavy-duty all-metal footswitch. Its design ensures easy battery replacement and long battery life, with the option for adapter power for extended usage. Overall, the Pete Cornish SS-3 is a versatile and reliable overdrive pedal designed to maintain the tonal nuances of the guitar while offering a wide range of overdriven amp sounds and tonal shaping capabilities.

Battery Free TB-83

The Battery Free TB-83 by Pete Cornish is a treble boost pedal designed to enhance the tone and overdrive characteristics of low-gain amplifiers, particularly the "Normal Channel" in early Vox AC30s. Here are the technical specifications and features: 1\. Design and Use Cases: \- Originally designed to be the interface between Burns Tri-Sonic pickups and the "Normal" input on vintage Vox AC30 amplifiers. \- Also performs well with other low-gain amps that have little or no built-in treble boost. \- Intended to improve the tone and overdrive characteristics by adding "Bite" and "Dirt" to low-gain amplifiers. 2\. Construction: \- Each unit is independently hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish. \- Modular design allows for replaceable parts if damaged. 3\. Technical Information: \- Maximum output: +10dBm \- Measured output noise with a 10KΩ source impedance: -82dBm, providing a signal-to-noise ratio of 92dB. \- Active circuitry is potted in semi-flexible resin for environmental protection and to eliminate microphonic feedback. \- Glass fibre PCBs are used to reduce resonant vibrations. 4\. Housing and Dimensions: \- Housed in a rugged die-cast box with a Hi-Brite "Power ON" LED. \- Dimensions: 121 x 66 x 40 mm. 5\. Power: \- Input for a DC adapter (coax connector size: 5.5/2.1mm, center pin negative (-VE)). \- Recommended adapter: Voodoo Lab Pedal Power 2 Plus, providing noise-free, fully stabilized 9V DC at 20mA. \- Use of other types of DC adapters may void the warranty and cause damage. 6\. Warranty: \- Covered by a two-year warranty for manufacturing faults, excluding normal wear, misuse, unauthorized modifications, or accidental damage. \- Warranty void if guarantee labels are damaged or removed. The TB-83 is a versatile pedal suitable for enhancing the performance of low- gain amplifiers and is built to high standards with a focus on durability and performance.

TB-83+

The Pete Cornish TB-83+ is a treble booster designed to enhance the tone and overdrive characteristics of low-gain amplifiers, particularly the "Normal Channel" in vintage Vox AC30s. It is also suitable for use with other low-gain amps lacking built-in treble boost. Each unit is hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish, ensuring high quality and attention to detail. Technical Information: 1) The TB-83+ was originally designed as an interface between Burns Tri-Sonic pickups and the "Normal" input on vintage Vox AC30 amplifiers. 2) Each TB-83+ unit is individually numbered, signed, and dated internally, providing full traceability and history. 3) The active circuitry is potted in semi-flexible resin to protect against environmental conditions and eliminate the possibility of microphonic feedback. 4) The maximum output of the TB-83+ is +10dBm, with a measured output noise of -82dBm and a signal-to-noise ratio of 92dB. 5) It is equipped with an input for a DC adapter (5.5/2.1mm, center pin negative), requiring a noise-free, fully stabilized 9V DC supply capable of providing 20mA. Features: \- Rugged die-cast box with a Hi-Brite "Power ON" LED \- Dimensions: 121 x 66 x 40 mm \- Battery: MN1604 with a battery life of 500 hours \- Origin: Made in the UK by Pete & Lynda Cornish The TB-83+ is designed to provide a significant treble boost, adding "bite" and "dirt" to low-gain amplifiers, and is particularly suitable for guitar and bass instruments. It is a versatile tool for musicians seeking to enhance their amplifier's tone and overdrive characteristics, especially in live or recorded settings.

SS-2TM

The Pete Cornish SS-2™ is a distortion effect pedal designed to offer a wide range of tonal colors and responsiveness to changes in guitar volume and picking articulation. It is known for its exceptional bottom-end retention, sweet and transparent mid-range, and the ability to retain the tonal nuances of the guitar while providing power and sustain. The pedal is suitable for progressing from subtle overdriven amp sounds to rhythmic crunch and blues lead when used with a clean amp. Key Features: \- RFI rejecting input and bypass buffer \- Hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish \- Housed in a rugged die-cast box with "Chicken-Head" pointer knobs \- Heavy-duty custom-made all-metal footswitch with Hi-Brite LED \- Easy battery replacement via a removable "drawer" \- Dimensions: 171 x 121 x 55 mm Power Options: \- Battery: MN1604 type, switched on when the "INPUT /PWR ON" jack is inserted \- DC Adapter: 5.5/2.1mm coax connector, center pin negative (-VE), 9V DC, 20mA \- Recommended adapters: Voodoo Lab Pedal Power 2 Plus for multiple pedals, BOSS PSA series for a single unit Warranty: The pedal comes with a 12-month warranty covering manufacturing faults, excluding normal wear, misuse, unauthorized modifications, or accidental damage. The warranty is void if guarantee labels are damaged or removed and is not transferable. For more detailed information, including current pricing and availability, it is recommended to visit the official Pete Cornish website or authorized retailers.

G-2

The Pete Cornish G-2™ is a highly acclaimed distortion unit designed for guitarists in the rock arena. It features a four-stage overdriven discrete transistor Class A circuit with additional Germanium components, producing warmer sounding harmonics. The G-2™ is known for preserving the original guitar sound and dynamics, creating a more musical effect than other distortion pedals. Key Features: \- Four-stage overdriven discrete transistor Class A circuit with additional Germanium components \- High Impedance, Unity Gain, Class A, Buffer Preamp with superior RFI rejecting capability \- Low Impedance output for extended cable runs in bypass mode \- Rugged die-cast box with lined control knobs \- Heavy-duty custom-made all-metal footswitch with large cap and protection ring, plus Hi-Brite LED \- Easy battery replacement via a removable "drawer" \- Input for a DC adapter (5.5/2.1mm, center pin negative, 9V DC, 20mA) \- Hand-built, wired, and tested by Pete, Lynda, and Mingus Cornish \- Dimensions: 171 x 121 x 55 mm / 6.75 x 4.75 x 2.2 inches Warranty Details: \- Built using the finest available components and constructed to the highest standards \- Twelve-month warranty from the date of purchase for original manufacturing faults \- Warranty void if guarantee labels are damaged or removed \- Warranty does not apply to customer's own equipment connected to the unit The G-2™ is recommended to be fed into a clean, full-frequency response amplifier for optimal performance. It is designed to provide a higher level of overdrive, starting at the rhythmic crunch stage and progressing to a rounded but dynamic lead, reminiscent of classic cranked up Marshall sounds found in British rock records of the 70s.