Manufacturers
Guitar Pedals from Stone Deaf FX
Welcome to your ultimate guide to Stone Deaf FX's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by Stone Deaf FX. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Distortion
Warp Drive
Here are the technical specifications and features: \- The Warp Drive is a high-gain Paracentric-Distortion filter pedal designed for electric guitars and basses. \- It features an ultra-saturated cascading gain stage circuit, allowing users to achieve saturated tones reminiscent of various metal genres, including Sabbath-era hard rock, Pantera, Mastodon, Bullet for My Valentine, and Trivium. \- The pedal includes a built-in noise gate for tight rhythm playing and effective gain stacking. \- The Paracentric EQ provides precise tone shaping, allowing users to cut through the mix and experiment with novel layering techniques during recording. \- The pedal is equipped with an expression input, compatible with the Stone Deaf EP-1 active expression pedal, enabling high gain wah, phaser effects, and on-the-fly tone control with foot operation. \- The expression input is specifically designed to work with the Stone Deaf EP-1 active expression pedal. \- Each Warp Drive pedal is proudly manufactured by Stone Deaf in their factory based in Huddersfield, West Yorkshire, England.
PDF-1 Parametric Distortion Filter
PDF-1X Parametric Distortion Filter
The Stone Deaf FX PDF-1X Parametric Distortion Filter is a versatile offering that combines boost, cut, Parametric EQ, Distortion, Overdrive, and Fuzz Tones, as well as Expression. It is a combination of the original PDF-1 and PDF-2 with a limited number of units being manufactured worldwide. The PDF-1X takes the best features of both units and combines them for a set-and-forget pedal board staple, as well as a studio recording tool to enhance tone and amp performance. Key features and specifications include: \- Combination of the original PDF-1 and PDF-2 \- Parametric EQ with a foot-switchable Clean and Dirty channel \- Additional volume control \- Controller: Height, Vol., Freq., Bandwidth \- LED: Effect On \- Foot-switch: Clean/Dirty - On/Off \- Bypass effect \- Input: 6.3 mm Jack \- Output: 6.3 mm Jack \- Exp: 6.3 mm Jack \- Power supply adapter connection: Coaxial connector 5.5 x 2.1 mm, negative polarity inside \- Power supply via 9 V battery or 9 V DC power supply \- Dimensions (W x D x H): 9 x 15 x 7 cm \- Weight: 600 g \- Made in the United Kingdom The PDF-1X is designed to work on bass, synth, or other instruments, making it one of the most versatile analog pedals on the market. It offers a soft clipping circuit set to PDF-1 territory from manufacture, allowing users to adjust accordingly to achieve PDF-2 gain by using the internal gain trim pot.
PDF-2
The Stone Deaf PDF-2 is a versatile parametric overdrive pedal designed for use with guitars, basses, drums, synths, and more. It features a reduced noise floor, adjustable gain control, and dual footswitches for seamless channel switching. The pedal offers a highly sculptable parametric EQ with a frequency response ranging from 35Hz to 6kHz, allowing users to dial in a full tonal spectrum of their amplifier tone. The wide gain range of the PDF-2 enables users to achieve light overdrive to wild distortion, making it suitable for a variety of musical styles. Key Features: \- Reduced noise floor \- Adjustable gain control \- Dual footswitches for clean and dirty channel switching \- Highly sculptable parametric EQ \- Wide gain range for light overdrive to wild distortion \- True-Bypass switching \- Top-mounted I/O \- Handmade in the UK \- Optional Stone Deaf EP-1 active expression pedal for phaser/wah functionality The PDF-2 can be powered by an optional 9V PP3 battery or a PSU (9V DC, center -, 2.1mm, ~30mA current draw). The expression input on the pedal is compatible with the Stone Deaf EP-1 active expression pedal, allowing for on-the-fly tone sculpting or foot-controlled phaser and wah sounds. The pedal's rugged design makes it suitable for professional use on tour, and it has been used by renowned guitarists such as Josh Homme and Nick Valensi. The PDF-2 is proudly manufactured by Stone Deaf in their factory based in Huddersfield, West Yorkshire, England.
PDF-1X
The Stone Deaf FX PDF-1X is a hybrid pedal that combines the attributes and features of the PDF-1 and the PDF-2. This limited edition pedal incorporates a volume control knob, lower noise floor, and an additional 15+ dB boost, making it the most versatile version. The PDF-1X is designed to be a set-and-forget pedal board staple and a studio recording tool to enhance tone and amp performance. Key features and functionality of the Stone Deaf FX PDF-1X include: \- Combination of the original PDF-1 and PDF-2 with added features \- Incorporation of a volume knob, which was lacking in the previous models \- Gain knob tucked away as an internal trim pot for set-and-forget operation \- Soft clipping circuit set to PDF-1 territory from manufacture, allowing adjustment for PDF-2 gain using the internal gain trim pot \- Versatile offering combining boost, cut, Parametric EQ, Distortion, Overdrive, and Fuzz Tones as well as Expression \- Compatibility with bass, synth, or other instruments for experimentation, making it one of the most versatile analog pedals on the market The Stone Deaf FX PDF-1X is designed to provide a wide range of tonal options on both channels, enabling users to drive clean amps into overdrive or manage tone at lower levels. It is suitable for various use-cases, including live performances, studio recordings, and experimentation with different instruments.
Trashy Blonde
The Trashy Blonde by Stone Deaf FX is a versatile paracentric distortion filter pedal designed to deliver dynamic Marshall-style distortion and powerful parametric EQ control. Manufactured in the United Kingdom using high- quality components, this pedal is inspired by the classic Marshall tone of the JTM45 through to the JCM800, making it extremely versatile for a wide range of applications. Key Features: \- Paracentric EQ: The Trashy Blonde features a parametric EQ with a para- centric cut/boost design, allowing precise control over frequency bands from 20 Hz to 6 kHz. The 5-way rotary switch sets the bandwidth, enabling users to dial in anything from a wide swath to a narrow slice of frequencies. \- Distortion Control: The pedal offers a "Trash" control to adjust the intensity of the British-flavored distortion, providing a range of overdriven tones reminiscent of classic rock bands like AC/DC and Led Zeppelin. \- Overdrive Bypass: Users can bypass the overdrive circuit via footswitching, allowing the application of EQ to clean tones. Additionally, the pedal supports connection with Stone Deaf's optional expression pedal for real-time frequency changes and unique phasing and wah effects. \- Mix Control: The mix knob enables the blending of the relative amounts of dry and affected signals, offering flexibility for both guitarists and bassists. Design and Build: The Trashy Blonde pedal features a bold gold finish and a robust, weighty construction with substantial knobs and switches. It includes a side-mounted 9V battery drawer for quick battery changes. Functionality and Use-Cases: The Trashy Blonde is suitable for guitarists and bassists seeking precise tone shaping and versatile overdrive capabilities. It can be used to shape clean tones with surgical precision, mimic different pickup tones, and achieve a wide range of overdriven and distorted sounds, from classic rock to high-gain territory. Overall, the Trashy Blonde by Stone Deaf FX offers a powerful and flexible EQ section combined with buttery British-flavored overdrive, making it a dual- channel tone processor suitable for professional musicians and tone enthusiasts.
EQ
Fig Fumb
The Fig Fumb by Stone Deaf FX is a versatile pedal designed to deliver classic Muff-inspired fuzz tones with enhanced control and stability. It features a parametric EQ with adjustable high-gain fuzz, allowing for a wide range of tonal palettes. The frequency response ranges from 35Hz to 6kHz, providing a full spectrum of guitar amplifier tones. Key features and specifications include: \- Dual channel operation with or without a noise gate function, switchable between rhythm (with noise gate) and lead channels without noise gate \- Frequency control knob sweep control via expression pedal for on-the-fly high-gain fuzz frequency changes \- Fuzz Wah Wah function and Phaser function via expression pedal, offering versatile tonal options \- 9V power supply center negative with low power consumption \- Quick Change Battery Box for easy battery replacement \- Top-mounted jacks for convenient pedalboard placement \- Handmade in the UK with super-transparent buffered bypass \- Power requirement: 9V DC \- Current draw: 55mA The Fig Fumb is suitable for guitars and basses, and its highly sculptable Paracentric EQ allows users to dial in perfect Muff tones from any Big Muff era. With its stability and control, this pedal is suitable for a wide range of musical styles and applications, making it a valuable addition to any guitarist's setup.
PDF-1X Parametric Distortion Filter
The Stone Deaf FX PDF-1X Parametric Distortion Filter is a versatile offering that combines boost, cut, Parametric EQ, Distortion, Overdrive, and Fuzz Tones, as well as Expression. It is a combination of the original PDF-1 and PDF-2 with a limited number of units being manufactured worldwide. The PDF-1X takes the best features of both units and combines them for a set-and-forget pedal board staple, as well as a studio recording tool to enhance tone and amp performance. Key features and specifications include: \- Combination of the original PDF-1 and PDF-2 \- Parametric EQ with a foot-switchable Clean and Dirty channel \- Additional volume control \- Controller: Height, Vol., Freq., Bandwidth \- LED: Effect On \- Foot-switch: Clean/Dirty - On/Off \- Bypass effect \- Input: 6.3 mm Jack \- Output: 6.3 mm Jack \- Exp: 6.3 mm Jack \- Power supply adapter connection: Coaxial connector 5.5 x 2.1 mm, negative polarity inside \- Power supply via 9 V battery or 9 V DC power supply \- Dimensions (W x D x H): 9 x 15 x 7 cm \- Weight: 600 g \- Made in the United Kingdom The PDF-1X is designed to work on bass, synth, or other instruments, making it one of the most versatile analog pedals on the market. It offers a soft clipping circuit set to PDF-1 territory from manufacture, allowing users to adjust accordingly to achieve PDF-2 gain by using the internal gain trim pot.
PDF-2
The Stone Deaf PDF-2 is a versatile parametric overdrive pedal designed for use with guitars, basses, drums, synths, and more. It features a reduced noise floor, adjustable gain control, and dual footswitches for seamless channel switching. The pedal offers a highly sculptable parametric EQ with a frequency response ranging from 35Hz to 6kHz, allowing users to dial in a full tonal spectrum of their amplifier tone. The wide gain range of the PDF-2 enables users to achieve light overdrive to wild distortion, making it suitable for a variety of musical styles. Key Features: \- Reduced noise floor \- Adjustable gain control \- Dual footswitches for clean and dirty channel switching \- Highly sculptable parametric EQ \- Wide gain range for light overdrive to wild distortion \- True-Bypass switching \- Top-mounted I/O \- Handmade in the UK \- Optional Stone Deaf EP-1 active expression pedal for phaser/wah functionality The PDF-2 can be powered by an optional 9V PP3 battery or a PSU (9V DC, center -, 2.1mm, ~30mA current draw). The expression input on the pedal is compatible with the Stone Deaf EP-1 active expression pedal, allowing for on-the-fly tone sculpting or foot-controlled phaser and wah sounds. The pedal's rugged design makes it suitable for professional use on tour, and it has been used by renowned guitarists such as Josh Homme and Nick Valensi. The PDF-2 is proudly manufactured by Stone Deaf in their factory based in Huddersfield, West Yorkshire, England.
PDF-1X
The Stone Deaf FX PDF-1X is a hybrid pedal that combines the attributes and features of the PDF-1 and the PDF-2. This limited edition pedal incorporates a volume control knob, lower noise floor, and an additional 15+ dB boost, making it the most versatile version. The PDF-1X is designed to be a set-and-forget pedal board staple and a studio recording tool to enhance tone and amp performance. Key features and functionality of the Stone Deaf FX PDF-1X include: \- Combination of the original PDF-1 and PDF-2 with added features \- Incorporation of a volume knob, which was lacking in the previous models \- Gain knob tucked away as an internal trim pot for set-and-forget operation \- Soft clipping circuit set to PDF-1 territory from manufacture, allowing adjustment for PDF-2 gain using the internal gain trim pot \- Versatile offering combining boost, cut, Parametric EQ, Distortion, Overdrive, and Fuzz Tones as well as Expression \- Compatibility with bass, synth, or other instruments for experimentation, making it one of the most versatile analog pedals on the market The Stone Deaf FX PDF-1X is designed to provide a wide range of tonal options on both channels, enabling users to drive clean amps into overdrive or manage tone at lower levels. It is suitable for various use-cases, including live performances, studio recordings, and experimentation with different instruments.
Fuzz
Fig Fumb
The Fig Fumb by Stone Deaf FX is a versatile pedal designed to deliver classic Muff-inspired fuzz tones with enhanced control and stability. It features a parametric EQ with adjustable high-gain fuzz, allowing for a wide range of tonal palettes. The frequency response ranges from 35Hz to 6kHz, providing a full spectrum of guitar amplifier tones. Key features and specifications include: \- Dual channel operation with or without a noise gate function, switchable between rhythm (with noise gate) and lead channels without noise gate \- Frequency control knob sweep control via expression pedal for on-the-fly high-gain fuzz frequency changes \- Fuzz Wah Wah function and Phaser function via expression pedal, offering versatile tonal options \- 9V power supply center negative with low power consumption \- Quick Change Battery Box for easy battery replacement \- Top-mounted jacks for convenient pedalboard placement \- Handmade in the UK with super-transparent buffered bypass \- Power requirement: 9V DC \- Current draw: 55mA The Fig Fumb is suitable for guitars and basses, and its highly sculptable Paracentric EQ allows users to dial in perfect Muff tones from any Big Muff era. With its stability and control, this pedal is suitable for a wide range of musical styles and applications, making it a valuable addition to any guitarist's setup.
Kliptonite
The Stone Deaf FX Kliptonite is a dual parametric OD/velcro fuzz pedal designed for versatile sound manipulation. The pedal features a unique concept where the signal is split inside the circuit and then mixed back together, allowing users to mix overdrive and fuzz in different ratios to create unique sounds. The pedal incorporates a parametric EQ, providing a generous array of tones for both guitar and bass. Specifications: \- Power Draw: 55mA (Only use isolated power supply to avoid unwanted noise) \- Bypass: True Bypass \- Product Dimensions: Height: 7cm, Width: 10.1cm, Length: 15.3cm (Inches: Height: 2.75, Width: 3.97, Length: 6) The Kliptonite Black Edition is a limited version of the original Kliptonite circuit, boasting an updated gain stage on each of the fuzz and overdrive channels, as well as a more balanced volume between the two. The Fuzz side features a velcro fuzz, while the Overdrive side is a version of the Tube Sound Overdrive.
Overdrive and Boost
Kliptonite
The Stone Deaf FX Kliptonite is a dual parametric OD/velcro fuzz pedal designed for versatile sound manipulation. The pedal features a unique concept where the signal is split inside the circuit and then mixed back together, allowing users to mix overdrive and fuzz in different ratios to create unique sounds. The pedal incorporates a parametric EQ, providing a generous array of tones for both guitar and bass. Specifications: \- Power Draw: 55mA (Only use isolated power supply to avoid unwanted noise) \- Bypass: True Bypass \- Product Dimensions: Height: 7cm, Width: 10.1cm, Length: 15.3cm (Inches: Height: 2.75, Width: 3.97, Length: 6) The Kliptonite Black Edition is a limited version of the original Kliptonite circuit, boasting an updated gain stage on each of the fuzz and overdrive channels, as well as a more balanced volume between the two. The Fuzz side features a velcro fuzz, while the Overdrive side is a version of the Tube Sound Overdrive.
QBoost Limited Edition
The QBoost Limited Edition by Stone Deaf FX is a versatile effect pedal designed for electric guitar and bass. It features a dual-circuit design that allows users to toggle between vintage and modern voices, offering a wide spectrum of sonic options. The pedal is capable of delivering transparent frequency boost, saturated overdrive, and 'dying amp' fuzz, making it suitable for various musical settings, including studios, stages, and bedrooms. Key Features: \- Dual-circuit design with vintage and modern voices \- Built-in frequency booster with a natural Q factor, covering a range from 35Hz to 6kHz \- Parametric EQ providing up to 15dB of boost for bass, mid, and treble \- Footswitch for quick toggling between different settings \- Mono input and outputs applicable for any instrument, with a recommendation to use DI for non-guitar inputs to reduce noise \- Power requirement: 9V center negative, minimum 55mA, and it is recommended to use isolated power supplies The QBoost Limited Edition is designed to interact seamlessly with the user's gear, unlocking new and awe-inspiring tones. It is a one-of-a-kind tone shaper that enhances the user's musical expression and creativity.
PDF-1X Parametric Distortion Filter
The Stone Deaf FX PDF-1X Parametric Distortion Filter is a versatile offering that combines boost, cut, Parametric EQ, Distortion, Overdrive, and Fuzz Tones, as well as Expression. It is a combination of the original PDF-1 and PDF-2 with a limited number of units being manufactured worldwide. The PDF-1X takes the best features of both units and combines them for a set-and-forget pedal board staple, as well as a studio recording tool to enhance tone and amp performance. Key features and specifications include: \- Combination of the original PDF-1 and PDF-2 \- Parametric EQ with a foot-switchable Clean and Dirty channel \- Additional volume control \- Controller: Height, Vol., Freq., Bandwidth \- LED: Effect On \- Foot-switch: Clean/Dirty - On/Off \- Bypass effect \- Input: 6.3 mm Jack \- Output: 6.3 mm Jack \- Exp: 6.3 mm Jack \- Power supply adapter connection: Coaxial connector 5.5 x 2.1 mm, negative polarity inside \- Power supply via 9 V battery or 9 V DC power supply \- Dimensions (W x D x H): 9 x 15 x 7 cm \- Weight: 600 g \- Made in the United Kingdom The PDF-1X is designed to work on bass, synth, or other instruments, making it one of the most versatile analog pedals on the market. It offers a soft clipping circuit set to PDF-1 territory from manufacture, allowing users to adjust accordingly to achieve PDF-2 gain by using the internal gain trim pot.
PDF-2
The Stone Deaf PDF-2 is a versatile parametric overdrive pedal designed for use with guitars, basses, drums, synths, and more. It features a reduced noise floor, adjustable gain control, and dual footswitches for seamless channel switching. The pedal offers a highly sculptable parametric EQ with a frequency response ranging from 35Hz to 6kHz, allowing users to dial in a full tonal spectrum of their amplifier tone. The wide gain range of the PDF-2 enables users to achieve light overdrive to wild distortion, making it suitable for a variety of musical styles. Key Features: \- Reduced noise floor \- Adjustable gain control \- Dual footswitches for clean and dirty channel switching \- Highly sculptable parametric EQ \- Wide gain range for light overdrive to wild distortion \- True-Bypass switching \- Top-mounted I/O \- Handmade in the UK \- Optional Stone Deaf EP-1 active expression pedal for phaser/wah functionality The PDF-2 can be powered by an optional 9V PP3 battery or a PSU (9V DC, center -, 2.1mm, ~30mA current draw). The expression input on the pedal is compatible with the Stone Deaf EP-1 active expression pedal, allowing for on-the-fly tone sculpting or foot-controlled phaser and wah sounds. The pedal's rugged design makes it suitable for professional use on tour, and it has been used by renowned guitarists such as Josh Homme and Nick Valensi. The PDF-2 is proudly manufactured by Stone Deaf in their factory based in Huddersfield, West Yorkshire, England.
PDF-1X
The Stone Deaf FX PDF-1X is a hybrid pedal that combines the attributes and features of the PDF-1 and the PDF-2. This limited edition pedal incorporates a volume control knob, lower noise floor, and an additional 15+ dB boost, making it the most versatile version. The PDF-1X is designed to be a set-and-forget pedal board staple and a studio recording tool to enhance tone and amp performance. Key features and functionality of the Stone Deaf FX PDF-1X include: \- Combination of the original PDF-1 and PDF-2 with added features \- Incorporation of a volume knob, which was lacking in the previous models \- Gain knob tucked away as an internal trim pot for set-and-forget operation \- Soft clipping circuit set to PDF-1 territory from manufacture, allowing adjustment for PDF-2 gain using the internal gain trim pot \- Versatile offering combining boost, cut, Parametric EQ, Distortion, Overdrive, and Fuzz Tones as well as Expression \- Compatibility with bass, synth, or other instruments for experimentation, making it one of the most versatile analog pedals on the market The Stone Deaf FX PDF-1X is designed to provide a wide range of tonal options on both channels, enabling users to drive clean amps into overdrive or manage tone at lower levels. It is suitable for various use-cases, including live performances, studio recordings, and experimentation with different instruments.
Trashy Blonde
The Trashy Blonde by Stone Deaf FX is a versatile paracentric distortion filter pedal designed to deliver dynamic Marshall-style distortion and powerful parametric EQ control. Manufactured in the United Kingdom using high- quality components, this pedal is inspired by the classic Marshall tone of the JTM45 through to the JCM800, making it extremely versatile for a wide range of applications. Key Features: \- Paracentric EQ: The Trashy Blonde features a parametric EQ with a para- centric cut/boost design, allowing precise control over frequency bands from 20 Hz to 6 kHz. The 5-way rotary switch sets the bandwidth, enabling users to dial in anything from a wide swath to a narrow slice of frequencies. \- Distortion Control: The pedal offers a "Trash" control to adjust the intensity of the British-flavored distortion, providing a range of overdriven tones reminiscent of classic rock bands like AC/DC and Led Zeppelin. \- Overdrive Bypass: Users can bypass the overdrive circuit via footswitching, allowing the application of EQ to clean tones. Additionally, the pedal supports connection with Stone Deaf's optional expression pedal for real-time frequency changes and unique phasing and wah effects. \- Mix Control: The mix knob enables the blending of the relative amounts of dry and affected signals, offering flexibility for both guitarists and bassists. Design and Build: The Trashy Blonde pedal features a bold gold finish and a robust, weighty construction with substantial knobs and switches. It includes a side-mounted 9V battery drawer for quick battery changes. Functionality and Use-Cases: The Trashy Blonde is suitable for guitarists and bassists seeking precise tone shaping and versatile overdrive capabilities. It can be used to shape clean tones with surgical precision, mimic different pickup tones, and achieve a wide range of overdriven and distorted sounds, from classic rock to high-gain territory. Overall, the Trashy Blonde by Stone Deaf FX offers a powerful and flexible EQ section combined with buttery British-flavored overdrive, making it a dual- channel tone processor suitable for professional musicians and tone enthusiasts.
QBoost Standard
The Stone Deaf FX QBoost Standard is a versatile effect pedal designed for electric guitar and bass. It features a dual-circuit design that combines vintage and modern voices, offering a wide spectrum of sonic options. The pedal includes a built-in frequency booster, allowing users to emphasize specific frequencies, from lows to highs, with a natural Q factor. The QBoost seamlessly interacts with your gear to unlock new and awe-inspiring tones, making it suitable for various musical applications. Technical Specifications: \- Inputs: Mono input and outputs applicable for any instrument. Recommended to use DI for non-guitar inputs to reduce noise. \- Power: 9V Center Negative, 55mA minimum. Isolated power supplies are recommended, and daisy chain power supplies are not recommended. \- Parametric EQ: Boost 1 band parametric mid control for controlling the middle frequencies of your guitar's response. It provides up to +15 dB boost for bass, mid, and treble frequencies. The frequency response ranges from 35Hz to 6kHz. \- Controls: The pedal features controls for Pre-Amp, Frequency Boost, and a footswitch for Effect Bypass and Frequency Boost Bypass. \- True Bypass: The QBoost Standard utilizes true bypass switching for maintaining the integrity of the guitar signal when the effect is not engaged. \- Dimensions: 72 x 112 x 52 mm \- Made in the UK The QBoost Standard is designed to deliver a wide range of tones, from transparent frequency boost to saturated overdrive and 'dying amp' fuzz. It offers switchable modern (clean and transparent) or vintage (saturated) pre- amp paired with an adjustable frequency control, providing users with flexibility in shaping their desired sound. It comes with a 30-Day Money-Back Guarantee and a 3-Year Thomann Warranty.
