Seraphim Shimmer

The Neunaber Seraphim Shimmer v2 is a stereo reverb pedal designed to provide lush reverb with a shimmer effect. Here are the technical specifications and features:

Features:
- Add or remove the shimmer layer from the reverb with a long press of the footswitch
- Mono input and output for quick and simple setup
- Analog dry signal for low noise and zero latency
- Small footprint with top jacks, making it pedalboard-friendly
- Powered from a standard 9-12V DC, drawing less than 100mA
- Manufactured locally in Orange County, California

Effects:
- Two effects in 1 pedal: Original Shimmer and New W3T Shimmer
- Simple 3-knob layout for easy adjustment of reverb sound
- Full Mix knob for adjustment from 0% to 100% wet
- Depth control for the length of the reverb tail or the size of the acoustic space
- Shim control for adjusting the amount of shimmer in the effect
- Effect switch to alternate between the original shimmer algorithm and new W3T shimmer algorithm
- Trails switch to select whether the effect signal trails off naturally or cuts off abruptly when bypassed

Specifications:
Electrical:
- Nominal input level: -10 dBV, instrument level
- Input impedance: 1 MΩ
- Frequency response, dry/bypassed: 20 Hz – 30 kHz, +/-1 dB
- Total harmonic distortion, dry/bypassed: 0.01%

Power:
- Input: 9-12V DC, 100mA
- Connector: center-negative, 5.5 mm OD x 2.1 mm ID

Physical:
- Dimensions: 115 mm L, 64 mm W, 46 mm H / 4.6" L, 2.6" W, 1.9" H
- Weight: 190 g / 6.7 oz

User-Friendly Features:
- Easy-to-use shimmer pedal with 3 knobs for dialing in various sounds
- Low power consumption, compatible with standard 9V or 12V pedal power supply
- Buffered bypass and analog dry signal for maintaining signal integrity