Fault V1

The Fault V1 by Old Blood Noise Endeavors is an overdrive/distortion pedal designed to provide a wide range of tonal options. Here are the technical specifications and features:

- Controls: The pedal features Volume, Gain 1, and Voice controls to set the sound of the primary overdrive. It also includes a Boost toggle to set the range and voice of Gain 1, Gain 2 to introduce additional gain when the Gain 2 footswitch is pressed, and a three-band EQ with Low, Mid, and High controls to adjust the post-drive voice of the pedal. Additionally, it has a Crush toggle to add additional clipping at the final stage in the circuit.

- Bypass: The Fault V1 is equipped with a soft-touch bypass footswitch for true bypass and minimal switch noise.

- Power Requirements: It requires a 9V DC center negative 2.1mm jack power supply capable of 60mA, which is not included with the pedal.

- Artwork: The artwork of the Fault V1 is by Evan M Cohen.

The Fault V1 is suitable for a variety of use-cases, from providing a sensitive drive for a clean signal to acting as an all-out distortion for chugging rhythms, singing leads, or noise experiments. It offers ample control over voicing and can be the only gain pedal on a user's board, although it also stacks well with other pedals.