Manufacturers
Guitar Pedals from AMT Electronics
Welcome to your ultimate guide to AMT Electronics's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by AMT Electronics. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Bass Effects
WH-1
The AMT WH-1, also known as the Japanese Girl Wah pedal, is an optical version of a classic "WAH-WAH" effect with bandpass filter range selection through a three-way switch. It features 100% analog WAH-WAH effect, true bypass, and fixed effect selection by pressing the movable front end part of the pedal. The pedal also includes removable support feet, effect monitoring by using blue LEDs on both pedal sides, and adjustable pedal movement by means of an axial screw. It is powered by a 9-12V DC adapter or 9V battery, with low power consumption (approximately 7mA). The pedal has a small size of 110 x 62 x 58 mm and weighs 0.45 kg (without the battery). The bandpass filter ranges are fixed at 0.2-1kH, 0.3-1.5 kH, and 0.4-2kH, offering versatile sound processing for both clean guitar sound and ultra-high gain overdrive. The steel heavy body of the pedal is stable and confidently responds to foot control, making it suitable for various playing styles. The AMT WH-1 is designed for electric guitar and is constructed from steel material. It is equipped with a true bypass switch and operates within a range of 9-12V DC power, with the power supply connector polarity being minus inside and plus outside. The pedal's compact size makes it easy to fit into a guitar case, offering convenience for transportation. Additionally, the optical frequency control increases the service life of the effect, eliminating frequent replacements and maintenance of the control potentiometer.
B-1
The AMT B-1 is a 1-channel JFET guitar preamp designed for studio recording and live shows. It is part of the AMT Legend Amp Series and is based on analog modeling of physical processes occurring in real vacuum triodes during guitar signal limitation. The preamp is intended for admirers of a "clanking" sound with elastic punch, emulating the Sharp channel of the Bogner Triple Giant. It offers tremendous density and power of sound, thunderous lows, screaming highs, and scoopable mids, providing unbeatable heavy distortion sounds. The preamp features high-level output signal, true bypass circuitry, and two signal outputs: direct amplifier out for guitar amplifier use and cab simulation out for mixer or studio use. Technical Specifications: \- Input Impedance: 1.0 MOhm \- Nominal Sensitivity: -20dB \- Output Impedance: 10 kOhm \- Output Signal Level: +10dB \- CAB.SIM. Output Impedance: 10 kOhm \- CAB.SIM. Output Signal Level: -10dB \- Power Supply: 6F22 battery or DC 9V/12V power adapter \- Current Consumption: Approx. 6.0mA \- Dimensions: 111 x 58 x 73 mm \- Net Weight (without battery): 0.23 kg Controls: \- LEVEL \- GAIN \- LOW \- MID \- HIGH The preamp is equipped with a battery power option and is constructed with steel material. It is designed for electric guitar use and offers preamp/cabsim operating modes.
Amp Modelers and Cab Sims
SS-30 Bulava
The SS-30 Bulava by AMT Electronics is a 3-channel JFET guitar preamp designed to deliver modern high-gain metal tones in a compact enclosure. Its key features and technical specifications include: \- Three Independent Channels: The preamp features 3 switchable channels, each with its own master control for precise leveling. \- EQ Controls: Clean and Crunch/Lead channels have their own 3-band EQ (Low, Mids, High) for customization. \- Tone Contour Buttons: The SS-30 includes three switchable buttons for added tone options, including Drive tone shift, Crunch bright, and Clean boost. \- FX Loop: It includes an FX Loop for adding external modulation effects in the correct signal chain location. \- Blistering Crunch and Lead Tones: The design is focused on simulating ultra high-gain amp heads, providing powerful tones. \- Dual Outputs: Equipped with outputs for connection to a guitar amplifier and direct connection to a computer, DAW, or mixing device. \- Power: Powered by two 9V batteries or an optional 18V DC power adapter, with negative center polarity (-) at 8mA. \- Additional Features: 2 Footswitches, Amp out and cabinet simulated outputs, and a 3.5mm jack to control external MIDI devices. These specifications make the SS-30 Bulava a versatile and feature-packed guitar preamp suitable for various musical applications.
CN-1 Chameleon Cab
The CN-1 Chameleon Cab by AMT Electronics is a speaker cabinet emulation tool designed to meet the demand for performing live without a guitar amp or combo, or for practicing or recording guitar at home studios. It allows guitarists to play with their favorite distortion/OD preamps directly into a computer, PA, or DAW, producing warm tones simulating guitar speaker cabinets. The pedal features the following controls and specifications: Controls: \- SIZE CAB: Adjusts the overall speaker cabinet size being emulated, simulating smaller 1 x 10″ style cabinets all the way up to a thick sounding 4 x 12″ cabinet, and everything in between. \- MAGNET: Adjusts the frequency cutoff response of the speaker magnets. \- POSITION: Emulates moving the microphone closer to the center of the speaker cone, or further away from the center. \- TURN: Emulates the rotational axis of the microphone, from straight on to an angled away facing microphone. Specifications: \- AMT Speaker Emulation Circuitry \- Cab Size, Magnet, Position, and Turn Controls \- 1/4″ Input and Output Jacks \- 1/8″ AUX Input and Output Jacks for other various devices \- Powered by 9-12v DC, Negative Center The pedal also features an AUX input for connecting an MP3 player or metronome for practice, and a 1/8″ phone output for individual practice without disturbing others. The CN-1 Chameleon Cab is a versatile tool for guitarists seeking a portable and effective solution for speaker cabinet emulation in various performance and recording scenarios.
Distortion
D2
The D2 by AMT Electronics is a two-channel preamp and distortion pedal designed to produce clean and overdriven guitar sounds within various channel configurations. It incorporates original circuit designs developed by AMT specialists, allowing for bright and rich sound in the style of original tube overdrives using low-voltage (9V) power and low current consumption. Key Features: \- Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT) \- Simultaneous use of all three outputs at once \- Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT) \- LED indicator when the effect is engaged Controls: \- OD LEVEL: adjusts the overall loudness of the pedal output \- OD GAIN: adjusts the amount of distortion and drive \- HIGH: controls the amount of high frequency in the signal \- MIDDLE: controls the amount of mid frequency in the signal \- BASS: controls the amount of bass frequency in the signal \- CL LEVEL: adjusts the buffer output of the bypassed signal, with 1 o’clock positioning representing standard -10dB level \- CL BOOST SWITCH: engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp Specifications: \- 9-12v DC power negative center (-), adapter or battery \- Low power consumption \- Small size: 110 x 62 x 58 mm The D2 also features a distinctive active bypass, reducing the need to minimize the length of used cables and retaining the original sound of the instrument when the effect is off. It can be used as a two-channel preamp when connected to an amp or a mixer, providing a switch between clean and overdriven channels by means of a footswitch.
E-1
The AMT Electronics E-1 Legend Amps is a one-channel preliminary guitar amplifier designed for direct connection to a power amplifier input or RETURN connector. It is part of the AMT Legend Amp Series, offering excellent dynamics, nuances, and characteristics similar to tube-driven amplifiers. The E-1 is designed to emulate the Lead channel of the ENGL Fireball amplifier, providing a resilient, aggressive distortion with a wide range of sensitivity adjustment for classic rock sounds and higher gain settings. Key Specifications: \- Input Impedance: 1.0 MΩ \- Nominal Sensitivity: -20dB \- Output Impedance: 10kΩ \- Output Signal Level: +10dB \- CAB.SIM. Output Signal Level: -10dB \- Power Supply: 9V battery (6F22) or optional power adapter \- Current Consumption: Approx. 6mA \- Dimensions: 111 x 58 x 73 mm \- Weight (without battery): 0.23 kg Controls: \- LEVEL: Output volume level \- GAIN: Preamp sensitivity level \- LOW, MID, HIGH: Tone shaping controls \- FOOTSWITCH: Switches between PREAMP / BYPASS Features: \- Two signal outputs: DIRECT AMPLIFIER OUT and CAB SIMULATION OUT \- True bypass circuitry for no loss of guitar signal \- Power saving mode for reduced current consumption \- Emulates the Lead channel of the ENGL Fireball amplifier The E-1 Legend Amps is suitable for both studio work and live performances, offering a direct recording option with the CAB OUT feature for high-quality direct sound. It is recommended to use a 9V battery or a compatible power adapter for optimal performance.
P2
The AMT Electronics P2 is a two-channel guitar preamp/distortion pedal designed to produce clean and overdriven guitar sounds. It features a compact size of 110 x 62 x 58 mm and operates on 9-12v DC power with negative center (-), compatible with an adapter or battery. The pedal offers three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT) for versatile connectivity options, allowing simultaneous use of all three outputs at once. Additionally, it includes optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT). The P2 also features LED indicators when the effect is engaged and has low power consumption. The controls include OD LEVEL for adjusting the overall loudness of the pedal output, OD GAIN for adjusting the amount of distortion and drive, HIGH for controlling the amount of high frequency in the signal, MIDDLE for controlling the amount of mid frequency in the signal, and BASS for controlling the amount of bass frequency in the signal. Furthermore, it has CL LEVEL for adjusting the buffer output of the bypassed signal, with 1 o’clock positioning representing standard -10dB level, and a CL BOOST SWITCH that engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp. The P2 is part of the Legend Amp Series II and is designed to provide a response, characteristics, gain, and tonal nuances similar to that of Peavey 5150 and 6505 Amplifiers, offering ultimate saturation with harmonics and richness.
P-Drive mini
The AMT Electronics P-Drive mini is a JFET distortion pedal designed for electric guitarists seeking distortion sounds similar to those of Peavey 5150 and 6505 amplifiers. It features analog (JFET) vacuum tube circuit modeling technology, providing bright, rich, full, and powerful distortion sounds. The pedal includes GAIN, TONE, and output LEVEL controls, as well as a voicing slide switch for neutral balanced or boosted mids. It also has a bright red on/off LED indicator and true bypass circuitry to preserve the instrument's tone when not in use. The pedal is housed in an ultra-compact metal enclosure and requires a 9-12 Volts DC power supply with a consumption of less than 4mA. It can be powered by a 9 or 12 Volt AC/DC adapter (not included). The P-Drive mini is designed to be connected in front of a clean channel input of guitar combos or amplifiers and does not have a cabinet simulated output. The resulting sound is influenced by the combo or amplifier used, as well as the speakers installed in the cabinet. In terms of controls, the sensitivity and drive/distortion amount are determined by the position of the GAIN control, while the overall output level is determined by the LEVEL control. The pedal also features a simplified TONE control for general tone matching and a VOICE switch to cut some mids. The P-Drive mini is known for its aggressive sound, emulating the sound and response of Peavey 5150 and 6505 amplifiers. Overall, the AMT Electronics P-Drive mini offers guitarists warm, crisp, natural tube sounds of their favorite high-gain amplifiers while preserving the individuality and tone of the instrument and equipment.
P1
The AMT Electronics P1 is a JFET guitar preamp designed to emulate the renowned Peavey 5150 amplifier. It offers a rich and full tone with tube-like rock distortion. Here are the technical specifications and features: Specifications: \- Input Impedance: 1.0 MOhm \- Nominal Sensitivity: -20dB \- Output Impedance: 10 kOhm \- Output Signal Level: +10dB \- CAB.SIM. Output Impedance: 10 kOhm \- CAB.SIM. Output Signal Level: -10dB \- Power Supply: 6F22 battery or DC 9V/12V \- Current Consumption: Approx. 6.0mA \- Dimensions (W x H x D): 111 x 58 x 73 mm \- Net Weight (without battery): 0.23 kg Features: \- Provides excellent dynamics, nuances, and characteristics similar to tube- driven amplifiers \- Tube-like range of volume control for great sound density, playability, and power \- TRUE BYPASS circuitry for no loss of guitar signal when bypassed \- High level of output signal (+10dB) corresponding to tube preamp output levels \- Controls include LEVEL, GAIN, LOW, MID, HIGH \- Two signal outputs: DIRECT AMPLIFIER OUT and CAB SIMULATION OUT \- Emulates the monstrous density, aggression, and huge gain of the Peavey 5150 amplifier It is recommended to use a 6F22 battery or a quality adapter such as AC/DC Adapter SA09DC-9V 1.11A or AC/DC Adapter SA12DC-12V 1.25A.
SS-11A (Classic)
The AMT Electronics SS-11A (Classic) is a 3-channel tube guitar preamp designed to cover classic jazzy, overdrive, and rock sounds of vintage tube amplifiers. Here are the technical specifications and features: Features: \- Fully tube-based 4-stage overdrive channel with DUAL TUBE design (2x12AX7) with high-voltage anode voltage (+300 V). \- Three separate channels: CLEAN, OVERDRIVE, and LEAD. \- Individual gain sensitivity and output level controls for clean and crunch/lead channels. \- TREBLE SHIFT toggle switch to enter bright mode for added punch of high end. \- FX LOOP for external effects. \- OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation. \- Incorporates new field-effect transistor-based guitar cabinet impulse response emulator processing for improved naturalness of sound when connected to a line input. \- Special attention paid to transistor anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal. Description of SS-11 Channels: \- LEAD channel provides thick viscous sound for playing both chunky rhythm parts and singing solos with excellent presence. TREBLE SHIFT toggle to take your lead sound into bright mode. \- OVERDRIVE channel features a more open structure of the sound, with a wide range of sensitivity adjustment resulting in a natural tube tone. \- CLEAN channel focuses on crystal clarity clean sound, with Low, Mid, and High controls for tweaking your sound. Specifications: \- Tubes: 12AX7 x 2 (6Н2П-ЕВ x 2) \- Input Impedance Rear Panel: 1MOhm \- Input Sensitivity Rear Panel: -10dB \- Output Impedance: 10kOhm \- Power Voltage: 12vDC (-)center \- Power Consumption: 600mA or .6A The SS-11A (Classic) by AMT Electronics is a versatile and powerful preamp designed to deliver a wide range of classic tube-driven guitar tones.
O-2
The AMT Electronics O-2 is a two-channel guitar preamp/distortion pedal designed to produce clean and overdriven guitar sounds. It incorporates original circuit designs developed by AMT specialists, allowing for bright and rich sound in the style of original tube overdrives using low-voltage (9V) power and low current consumption. The O-2 features a distinctive design with three outputs for implementing basic types of channel organization, including direct connection to a guitar system power amp, connection to a "clean" channel of a guitar combo or amp, and direct connection to a mixer. All three outputs can be used simultaneously, offering versatile routing and recording options. Specifications: \- 9-12v DC power negative center (-), adapter, or battery \- Low power consumption \- Small size: 110 x 62 x 58 mm \- Battery Power: Yes, the battery 6LR61 (9v) \- Input consumption current (mA): 6 \- Material: steel \- Number of channels: 2 \- Operating mode: preamp / overdrive pedal / cabsim (possible to use at the same time) \- Power supply included: no \- Power Type: DC adapter \- Range of operating voltage (V): 9-12 \- The polarity of the power supply connector: minus is inside, plus is outside Controls: \- OD LEVEL: adjusts the overall loudness of the pedal output \- OD GAIN: adjusts the amount of distortion and drive \- HIGH: controls the amount of high frequency in the signal \- MIDDLE: controls the amount of mid frequency in the signal \- BASS: controls the amount of bass frequency in the signal \- CL LEVEL: adjusts the buffer output of the bypassed signal, 1 o'clock positioning represents standard -10dB level \- CL BOOST SWITCH: engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp Features: \- Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT) \- Simultaneous use of all three outputs at once \- Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT) \- LED indicator when effect is engaged
B-1
The AMT B-1 is a 1-channel JFET guitar preamp designed for studio recording and live shows. It is part of the AMT Legend Amp Series and is based on analog modeling of physical processes occurring in real vacuum triodes during guitar signal limitation. The preamp is intended for admirers of a "clanking" sound with elastic punch, emulating the Sharp channel of the Bogner Triple Giant. It offers tremendous density and power of sound, thunderous lows, screaming highs, and scoopable mids, providing unbeatable heavy distortion sounds. The preamp features high-level output signal, true bypass circuitry, and two signal outputs: direct amplifier out for guitar amplifier use and cab simulation out for mixer or studio use. Technical Specifications: \- Input Impedance: 1.0 MOhm \- Nominal Sensitivity: -20dB \- Output Impedance: 10 kOhm \- Output Signal Level: +10dB \- CAB.SIM. Output Impedance: 10 kOhm \- CAB.SIM. Output Signal Level: -10dB \- Power Supply: 6F22 battery or DC 9V/12V power adapter \- Current Consumption: Approx. 6.0mA \- Dimensions: 111 x 58 x 73 mm \- Net Weight (without battery): 0.23 kg Controls: \- LEVEL \- GAIN \- LOW \- MID \- HIGH The preamp is equipped with a battery power option and is constructed with steel material. It is designed for electric guitar use and offers preamp/cabsim operating modes.
SS-11B (Modern)
The AMT Electronics SS-11B (Modern) is a 3-channel tube guitar preamp designed to deliver a versatile range of tones. Here are the key features and technical specifications: Features: \- Fully tube-based 4-stage overdrive channel with DUAL TUBE design (2x12AX7 or 2×6Н2П-ЕВ tubes) with high-voltage anode voltage (+300 V) \- Three separate channels: CLEAN / OVERDRIVE / LEAD \- Individual gain sensitivity and output level controls for clean and crunch/lead channels \- TREBLE SHIFT toggle switch to enter bright mode for added punch of high end \- FX LOOP for external effects \- OUTPUT jack for connecting to specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation \- Incorporates new field-effect transistor-based guitar cabinet impulse response emulator processing for improved naturalness of sound when connected to line input \- Special attention to transistor anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal Specifications: \- Tubes: 12AX7 x 2 (6Н2П-ЕВ x 2) \- Input Impedance Rear Panel: 1MOhm \- Input Sensitivity Rear Panel: -10dB \- Output Impedance: 10kOhm \- Power Voltage: 12vDC (-)center \- Power Consumption: 600mA or .6A The SS-11B (Modern) by AMT Electronics is designed to cater to the needs of guitarists seeking classic tube-driven overdrive tones and modern high-gain sounds, making it suitable for a wide range of musical styles and playing preferences.
Vt-Drive
The AMT Electronics Vt-Drive is a JFET distortion pedal designed for electric guitars. It is part of the Drive Series effects, intended to be connected in front of a "clean" channel input of guitar combos or amplifiers. The pedal does not have a cabinet simulated output and is aimed at providing warm, crisp, natural tube sounds of high gain amplifiers while preserving the individuality and tone of the instrument and equipment. Key features and technical specifications include: \- GAIN control for pedal sensitivity and drive/distortion amount adjustment \- LEVEL control for overall output level adjustment ranging from -10dB to +8dB \- TONE control for general tone matching of the pedal to the amplifier \- VOICE switch to cut some mids \- Standard 9vDC (-) negative center power required with low voltage consumption (less than 4mA) \- TRUE BYPASS circuitry for no tone coloration, signal degradation, or loss when the pedal is not in use The Vt-Drive is constructed with steel material and weighs approximately 0.31 kg. It operates within a range of 9-12V operating voltage and requires a DC adapter for power supply, which is not included.
Overdrive and Boost
P2
The AMT Electronics P2 is a two-channel guitar preamp/distortion pedal designed to produce clean and overdriven guitar sounds. It features a compact size of 110 x 62 x 58 mm and operates on 9-12v DC power with negative center (-), compatible with an adapter or battery. The pedal offers three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT) for versatile connectivity options, allowing simultaneous use of all three outputs at once. Additionally, it includes optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT). The P2 also features LED indicators when the effect is engaged and has low power consumption. The controls include OD LEVEL for adjusting the overall loudness of the pedal output, OD GAIN for adjusting the amount of distortion and drive, HIGH for controlling the amount of high frequency in the signal, MIDDLE for controlling the amount of mid frequency in the signal, and BASS for controlling the amount of bass frequency in the signal. Furthermore, it has CL LEVEL for adjusting the buffer output of the bypassed signal, with 1 o’clock positioning representing standard -10dB level, and a CL BOOST SWITCH that engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp. The P2 is part of the Legend Amp Series II and is designed to provide a response, characteristics, gain, and tonal nuances similar to that of Peavey 5150 and 6505 Amplifiers, offering ultimate saturation with harmonics and richness.
SS-30 Bulava
The SS-30 Bulava by AMT Electronics is a 3-channel JFET guitar preamp designed to deliver modern high-gain metal tones in a compact enclosure. Its key features and technical specifications include: \- Three Independent Channels: The preamp features 3 switchable channels, each with its own master control for precise leveling. \- EQ Controls: Clean and Crunch/Lead channels have their own 3-band EQ (Low, Mids, High) for customization. \- Tone Contour Buttons: The SS-30 includes three switchable buttons for added tone options, including Drive tone shift, Crunch bright, and Clean boost. \- FX Loop: It includes an FX Loop for adding external modulation effects in the correct signal chain location. \- Blistering Crunch and Lead Tones: The design is focused on simulating ultra high-gain amp heads, providing powerful tones. \- Dual Outputs: Equipped with outputs for connection to a guitar amplifier and direct connection to a computer, DAW, or mixing device. \- Power: Powered by two 9V batteries or an optional 18V DC power adapter, with negative center polarity (-) at 8mA. \- Additional Features: 2 Footswitches, Amp out and cabinet simulated outputs, and a 3.5mm jack to control external MIDI devices. These specifications make the SS-30 Bulava a versatile and feature-packed guitar preamp suitable for various musical applications.
P1
The AMT Electronics P1 is a JFET guitar preamp designed to emulate the renowned Peavey 5150 amplifier. It offers a rich and full tone with tube-like rock distortion. Here are the technical specifications and features: Specifications: \- Input Impedance: 1.0 MOhm \- Nominal Sensitivity: -20dB \- Output Impedance: 10 kOhm \- Output Signal Level: +10dB \- CAB.SIM. Output Impedance: 10 kOhm \- CAB.SIM. Output Signal Level: -10dB \- Power Supply: 6F22 battery or DC 9V/12V \- Current Consumption: Approx. 6.0mA \- Dimensions (W x H x D): 111 x 58 x 73 mm \- Net Weight (without battery): 0.23 kg Features: \- Provides excellent dynamics, nuances, and characteristics similar to tube- driven amplifiers \- Tube-like range of volume control for great sound density, playability, and power \- TRUE BYPASS circuitry for no loss of guitar signal when bypassed \- High level of output signal (+10dB) corresponding to tube preamp output levels \- Controls include LEVEL, GAIN, LOW, MID, HIGH \- Two signal outputs: DIRECT AMPLIFIER OUT and CAB SIMULATION OUT \- Emulates the monstrous density, aggression, and huge gain of the Peavey 5150 amplifier It is recommended to use a 6F22 battery or a quality adapter such as AC/DC Adapter SA09DC-9V 1.11A or AC/DC Adapter SA12DC-12V 1.25A.
SS-11A (Classic)
The AMT Electronics SS-11A (Classic) is a 3-channel tube guitar preamp designed to cover classic jazzy, overdrive, and rock sounds of vintage tube amplifiers. Here are the technical specifications and features: Features: \- Fully tube-based 4-stage overdrive channel with DUAL TUBE design (2x12AX7) with high-voltage anode voltage (+300 V). \- Three separate channels: CLEAN, OVERDRIVE, and LEAD. \- Individual gain sensitivity and output level controls for clean and crunch/lead channels. \- TREBLE SHIFT toggle switch to enter bright mode for added punch of high end. \- FX LOOP for external effects. \- OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation. \- Incorporates new field-effect transistor-based guitar cabinet impulse response emulator processing for improved naturalness of sound when connected to a line input. \- Special attention paid to transistor anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal. Description of SS-11 Channels: \- LEAD channel provides thick viscous sound for playing both chunky rhythm parts and singing solos with excellent presence. TREBLE SHIFT toggle to take your lead sound into bright mode. \- OVERDRIVE channel features a more open structure of the sound, with a wide range of sensitivity adjustment resulting in a natural tube tone. \- CLEAN channel focuses on crystal clarity clean sound, with Low, Mid, and High controls for tweaking your sound. Specifications: \- Tubes: 12AX7 x 2 (6Н2П-ЕВ x 2) \- Input Impedance Rear Panel: 1MOhm \- Input Sensitivity Rear Panel: -10dB \- Output Impedance: 10kOhm \- Power Voltage: 12vDC (-)center \- Power Consumption: 600mA or .6A The SS-11A (Classic) by AMT Electronics is a versatile and powerful preamp designed to deliver a wide range of classic tube-driven guitar tones.
O-2
The AMT Electronics O-2 is a two-channel guitar preamp/distortion pedal designed to produce clean and overdriven guitar sounds. It incorporates original circuit designs developed by AMT specialists, allowing for bright and rich sound in the style of original tube overdrives using low-voltage (9V) power and low current consumption. The O-2 features a distinctive design with three outputs for implementing basic types of channel organization, including direct connection to a guitar system power amp, connection to a "clean" channel of a guitar combo or amp, and direct connection to a mixer. All three outputs can be used simultaneously, offering versatile routing and recording options. Specifications: \- 9-12v DC power negative center (-), adapter, or battery \- Low power consumption \- Small size: 110 x 62 x 58 mm \- Battery Power: Yes, the battery 6LR61 (9v) \- Input consumption current (mA): 6 \- Material: steel \- Number of channels: 2 \- Operating mode: preamp / overdrive pedal / cabsim (possible to use at the same time) \- Power supply included: no \- Power Type: DC adapter \- Range of operating voltage (V): 9-12 \- The polarity of the power supply connector: minus is inside, plus is outside Controls: \- OD LEVEL: adjusts the overall loudness of the pedal output \- OD GAIN: adjusts the amount of distortion and drive \- HIGH: controls the amount of high frequency in the signal \- MIDDLE: controls the amount of mid frequency in the signal \- BASS: controls the amount of bass frequency in the signal \- CL LEVEL: adjusts the buffer output of the bypassed signal, 1 o'clock positioning represents standard -10dB level \- CL BOOST SWITCH: engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp Features: \- Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT) \- Simultaneous use of all three outputs at once \- Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT) \- LED indicator when effect is engaged
Vt-Drive
The AMT Electronics Vt-Drive is a JFET distortion pedal designed for electric guitars. It is part of the Drive Series effects, intended to be connected in front of a "clean" channel input of guitar combos or amplifiers. The pedal does not have a cabinet simulated output and is aimed at providing warm, crisp, natural tube sounds of high gain amplifiers while preserving the individuality and tone of the instrument and equipment. Key features and technical specifications include: \- GAIN control for pedal sensitivity and drive/distortion amount adjustment \- LEVEL control for overall output level adjustment ranging from -10dB to +8dB \- TONE control for general tone matching of the pedal to the amplifier \- VOICE switch to cut some mids \- Standard 9vDC (-) negative center power required with low voltage consumption (less than 4mA) \- TRUE BYPASS circuitry for no tone coloration, signal degradation, or loss when the pedal is not in use The Vt-Drive is constructed with steel material and weighs approximately 0.31 kg. It operates within a range of 9-12V operating voltage and requires a DC adapter for power supply, which is not included.
Preamps
SS-30 Bulava
The SS-30 Bulava by AMT Electronics is a 3-channel JFET guitar preamp designed to deliver modern high-gain metal tones in a compact enclosure. Its key features and technical specifications include: \- Three Independent Channels: The preamp features 3 switchable channels, each with its own master control for precise leveling. \- EQ Controls: Clean and Crunch/Lead channels have their own 3-band EQ (Low, Mids, High) for customization. \- Tone Contour Buttons: The SS-30 includes three switchable buttons for added tone options, including Drive tone shift, Crunch bright, and Clean boost. \- FX Loop: It includes an FX Loop for adding external modulation effects in the correct signal chain location. \- Blistering Crunch and Lead Tones: The design is focused on simulating ultra high-gain amp heads, providing powerful tones. \- Dual Outputs: Equipped with outputs for connection to a guitar amplifier and direct connection to a computer, DAW, or mixing device. \- Power: Powered by two 9V batteries or an optional 18V DC power adapter, with negative center polarity (-) at 8mA. \- Additional Features: 2 Footswitches, Amp out and cabinet simulated outputs, and a 3.5mm jack to control external MIDI devices. These specifications make the SS-30 Bulava a versatile and feature-packed guitar preamp suitable for various musical applications.
SS-11A (Classic)
The AMT Electronics SS-11A (Classic) is a 3-channel tube guitar preamp designed to cover classic jazzy, overdrive, and rock sounds of vintage tube amplifiers. Here are the technical specifications and features: Features: \- Fully tube-based 4-stage overdrive channel with DUAL TUBE design (2x12AX7) with high-voltage anode voltage (+300 V). \- Three separate channels: CLEAN, OVERDRIVE, and LEAD. \- Individual gain sensitivity and output level controls for clean and crunch/lead channels. \- TREBLE SHIFT toggle switch to enter bright mode for added punch of high end. \- FX LOOP for external effects. \- OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation. \- Incorporates new field-effect transistor-based guitar cabinet impulse response emulator processing for improved naturalness of sound when connected to a line input. \- Special attention paid to transistor anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal. Description of SS-11 Channels: \- LEAD channel provides thick viscous sound for playing both chunky rhythm parts and singing solos with excellent presence. TREBLE SHIFT toggle to take your lead sound into bright mode. \- OVERDRIVE channel features a more open structure of the sound, with a wide range of sensitivity adjustment resulting in a natural tube tone. \- CLEAN channel focuses on crystal clarity clean sound, with Low, Mid, and High controls for tweaking your sound. Specifications: \- Tubes: 12AX7 x 2 (6Н2П-ЕВ x 2) \- Input Impedance Rear Panel: 1MOhm \- Input Sensitivity Rear Panel: -10dB \- Output Impedance: 10kOhm \- Power Voltage: 12vDC (-)center \- Power Consumption: 600mA or .6A The SS-11A (Classic) by AMT Electronics is a versatile and powerful preamp designed to deliver a wide range of classic tube-driven guitar tones.
SS-11B (Modern)
The AMT Electronics SS-11B (Modern) is a 3-channel tube guitar preamp designed to deliver a versatile range of tones. Here are the key features and technical specifications: Features: \- Fully tube-based 4-stage overdrive channel with DUAL TUBE design (2x12AX7 or 2×6Н2П-ЕВ tubes) with high-voltage anode voltage (+300 V) \- Three separate channels: CLEAN / OVERDRIVE / LEAD \- Individual gain sensitivity and output level controls for clean and crunch/lead channels \- TREBLE SHIFT toggle switch to enter bright mode for added punch of high end \- FX LOOP for external effects \- OUTPUT jack for connecting to specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation \- Incorporates new field-effect transistor-based guitar cabinet impulse response emulator processing for improved naturalness of sound when connected to line input \- Special attention to transistor anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal Specifications: \- Tubes: 12AX7 x 2 (6Н2П-ЕВ x 2) \- Input Impedance Rear Panel: 1MOhm \- Input Sensitivity Rear Panel: -10dB \- Output Impedance: 10kOhm \- Power Voltage: 12vDC (-)center \- Power Consumption: 600mA or .6A The SS-11B (Modern) by AMT Electronics is designed to cater to the needs of guitarists seeking classic tube-driven overdrive tones and modern high-gain sounds, making it suitable for a wide range of musical styles and playing preferences.
Wah Wah
WH-1
The AMT WH-1, also known as the Japanese Girl Wah pedal, is an optical version of a classic "WAH-WAH" effect with bandpass filter range selection through a three-way switch. It features 100% analog WAH-WAH effect, true bypass, and fixed effect selection by pressing the movable front end part of the pedal. The pedal also includes removable support feet, effect monitoring by using blue LEDs on both pedal sides, and adjustable pedal movement by means of an axial screw. It is powered by a 9-12V DC adapter or 9V battery, with low power consumption (approximately 7mA). The pedal has a small size of 110 x 62 x 58 mm and weighs 0.45 kg (without the battery). The bandpass filter ranges are fixed at 0.2-1kH, 0.3-1.5 kH, and 0.4-2kH, offering versatile sound processing for both clean guitar sound and ultra-high gain overdrive. The steel heavy body of the pedal is stable and confidently responds to foot control, making it suitable for various playing styles. The AMT WH-1 is designed for electric guitar and is constructed from steel material. It is equipped with a true bypass switch and operates within a range of 9-12V DC power, with the power supply connector polarity being minus inside and plus outside. The pedal's compact size makes it easy to fit into a guitar case, offering convenience for transportation. Additionally, the optical frequency control increases the service life of the effect, eliminating frequent replacements and maintenance of the control potentiometer.
B-1
The AMT B-1 is a 1-channel JFET guitar preamp designed for studio recording and live shows. It is part of the AMT Legend Amp Series and is based on analog modeling of physical processes occurring in real vacuum triodes during guitar signal limitation. The preamp is intended for admirers of a "clanking" sound with elastic punch, emulating the Sharp channel of the Bogner Triple Giant. It offers tremendous density and power of sound, thunderous lows, screaming highs, and scoopable mids, providing unbeatable heavy distortion sounds. The preamp features high-level output signal, true bypass circuitry, and two signal outputs: direct amplifier out for guitar amplifier use and cab simulation out for mixer or studio use. Technical Specifications: \- Input Impedance: 1.0 MOhm \- Nominal Sensitivity: -20dB \- Output Impedance: 10 kOhm \- Output Signal Level: +10dB \- CAB.SIM. Output Impedance: 10 kOhm \- CAB.SIM. Output Signal Level: -10dB \- Power Supply: 6F22 battery or DC 9V/12V power adapter \- Current Consumption: Approx. 6.0mA \- Dimensions: 111 x 58 x 73 mm \- Net Weight (without battery): 0.23 kg Controls: \- LEVEL \- GAIN \- LOW \- MID \- HIGH The preamp is equipped with a battery power option and is constructed with steel material. It is designed for electric guitar use and offers preamp/cabsim operating modes.