Manufacturers
Guitar Pedals from Guyatone
Welcome to your ultimate guide to Guyatone's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by Guyatone. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Chorus and Vibrato
Chorus Box
The Guyatone Chorus Box, also known as the Guyatone PS-023 Chorus Box, is a versatile effects pedal designed to deliver chorus, flanger, and vibrato effects. The pedal offers the following technical specifications: \- Input Impedance: 1 MOhm \- Maximum Input Level: 2V \- Output Impedance: Less than 10 kOhms \- Maximum Output Voltage: 1V (effect) \- Power Source: DC 9V \- Power Consumption: 14 mA \- Dimensions: 74mm (W) x 56mm (H) x 122mm (D) \- Weight: 385g The Chorus Box features controls for adjusting the center setting of the selected effect, depth, rate, and resonance or feedback. It also includes a switch for toggling between chorus, vibrato, and flanger modes. The pedal is designed to provide a wide range of modulation effects suitable for various musical styles and applications. It is built with high-quality components and is made in Japan, reflecting Guyatone's reputation for producing reliable and innovative effects pedals.
PS-002 Chorus
Compression/Sustain
PS-003
The Guyatone PS-003 Compressor is a vintage 1980s pedal manufactured by Guyatone/Tokyo Sound Co. It is designed with the following technical specifications: \- Power: Battery DC 9 Volt / AC adaptor \- Switching System: "Noiseless" Solid state type \- Overall Size: 68 (W) x 53 (H) x 120 (D) mm \- Controls: Level, Sustain, Brilliance The pedal is suitable for use with guitars and other musical instruments, providing compression and sustain effects. It features a noiseless solid-state switching system and can be powered by a 9-volt battery or an AC adaptor. The compact dimensions make it suitable for pedalboard integration.
PS-103 Driving Box Compressor
The Guyatone PS-103 Driving Box Compressor is an analog compressor pedal produced in Japan in the mid-1970s. It features responsive and smooth compression, with simple Output and Sensitivity controls that belie a wide array of adjustable compression. The circuit includes a metal can CA3080 IC chip, delivering a low noise floor and functioning decently well as a limiter depending on user inputs. The pedal allows the player to pre-set a limited level of output which, while maintaining a constant volume, will produce a clean, undistorted sustain.
ST-2 Compression Sustainer
The Guyatone ST-2 Compression Sustainer is a compact stompbox pedal designed to provide extreme amounts of compression in a small format. It features variable Level and Sustain controls, allowing users to dramatically squash the input signal, resulting in smooth, clean bell-like notes that can last for an extended duration. The ST-2 also includes a direct on/off switch, which blends in a dry input signal at equal volume with the compressed signal, eliminating the attack- altering characteristics common to other compressors. This pedal can be used for a wide variety of applications, from achieving the ultimate "chicken pickin" guitar tone to functioning as a clean booster for overdriving the front end of an amp. With its full-frequency response, the ST-2 is suitable for use with any instrument, including guitar, bass, and keyboards. By manipulating the Sustain and Level controls, users can achieve effects ranging from subtle compression to signal limiting, as well as note attack-altering effects.
Delay
MD3 Micro Digital Delay
The Guyatone MD3 Micro Digital Delay is a compact and versatile delay pedal designed to offer a wide range of classic delay effects. Here are the technical specifications and features: Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Delay Time: \- 1: 20 - 160m/sec \- 2: 80 - 650m/sec \- 3: 330 - 2600m/sec \- Power Voltage: DC9V (Battery) / DC9V (AC Adaptor DC9V/200 mA (Center -/Sleeve +)) \- Current Consumption: 60 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 8.3 oz Features: \- Offers authentic note reproduction with crispness and clarity similar to a tape echo combined with the longer delay time of a digital unit \- Controls react like an analog unit, providing a familiar user experience \- Self-oscillation feature at higher feedback settings for creating unique sound effects \- Lower current draw compared to other digital units, resulting in longer battery life Use Cases: \- Suitable for creating classic delay effects ranging from Rockabilly slapback to Arena-rock washes of excess \- Capable of multi-layering short parts to create beautiful, ethereal soundscapes The MD3 Micro Digital Delay is designed to provide high-quality delay effects in a compact and user-friendly package, making it suitable for a wide range of musical styles and applications.
MD-3
The Guyatone MD-3 Micro Digital Delay pedal is a compact and versatile delay unit designed for guitarists and other musicians. It offers a range of features and functionalities that make it suitable for various musical styles and applications. Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Delay Time: \- Window 1: 20 - 160 milliseconds \- Window 2: 80 - 650 milliseconds \- Window 3: 330 - 2600 milliseconds \- Power Voltage: DC9V (Battery) / DC9V (AC Adaptor DC9V/200 mA (Center -/Sleeve +)) \- Current Consumption: 60 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 8.3 oz Features and Functionality: \- The MD-3 offers authentic note reproduction, ensuring that notes come back exactly as played without alteration. \- It provides a delay time range of 20 to 2600 milliseconds, allowing for a wide variety of delay effects from subtle to dramatic. \- The pedal features controls for Delay Time, Direct Level, and Feedback, enabling precise adjustment of the delay effect. \- At higher Feedback settings, the MD-3 can self-oscillate like an analog delay, creating cascades of repeats and unique sound effects. \- The pedal's lower current draw compared to other digital units results in extended battery life and less frequent battery changes. Use Cases: \- The MD-3 is suitable for guitarists and musicians looking to add delay effects to their performances and recordings. \- It can be used in various musical genres, including rock, blues, pop, and more, to create classic delay effects, ambient textures, and experimental sounds. Overall, the Guyatone MD-3 Micro Digital Delay pedal offers a compact and feature-rich solution for musicians seeking high-quality delay effects in a versatile and reliable unit.
PS-006
The Guyatone PS-006 Analog Echo pedal is a vintage echo effect with specific technical specifications. The pedal features a power requirement of a 9-volt battery or AC adaptor. It utilizes a "noiseless" solid-state switching system and has overall dimensions of 68mm (W) x 53mm (H) x 120mm (D). The pedal is designed to provide warm analog echo tones and is suitable for use in guitar effects setups. The specific design and functionality details beyond these specifications are not available in the search results.
MDm5
The Guyatone MDm5 Mighty Micro Digital Delay is a compact and versatile guitar effects pedal designed for professional and amateur musicians. The pedal offers a wide range of delay types and tones in an ultra-compact form factor. Specifications: \- Controls: Level, Time, Repeat, High Roll-Off \- Jacks: Input, Output, DC IN \- Switch: Effect On/Off (True Bypass) / Mode (S/M/L) \- Internal Switch: Input switch (-14 dB/0 dB) \- Indicator: Effect On/Off \- Input Impedance: 470 kOhm \- Output Impedance: Less than 10 kOhm \- Current Consumption: 49 mA (at effect ON) \- Power Requirement: DC 9V 006P (6F22)/AC-2 Adaptor \- Dimensions: 2-3/5" W x 2-3/10" H x 3-9/10" D \- Weight: 224 g (without battery) / 7.9 oz. \- Warranty: 3-year Guyatone parts and labor The MDm5 Micro Delay provides a delay range of 30 - 2600 ms, allowing for a diverse range of delay effects. Despite its small size, the pedal offers intuitive controls for precise adjustments to suit the user's needs. The pedal's compact dimensions make it suitable for pedalboards with limited space, and its durable construction ensures reliability for both live performances and studio recording sessions. The MDm5 is designed to deliver high-quality delay effects while maintaining a user-friendly interface, making it suitable for a wide range of musical styles and applications.
Distortion
PS-003
The Guyatone PS-003 Compressor is a vintage 1980s pedal manufactured by Guyatone/Tokyo Sound Co. It is designed with the following technical specifications: \- Power: Battery DC 9 Volt / AC adaptor \- Switching System: "Noiseless" Solid state type \- Overall Size: 68 (W) x 53 (H) x 120 (D) mm \- Controls: Level, Sustain, Brilliance The pedal is suitable for use with guitars and other musical instruments, providing compression and sustain effects. It features a noiseless solid-state switching system and can be powered by a 9-volt battery or an AC adaptor. The compact dimensions make it suitable for pedalboard integration.
SD2 Sustainer D
The Guyatone SD2 Sustainer D is a versatile pedal designed to provide compression, sustain, and distortion in one unit. It offers a range of features and specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Max Amplitude: +40dB \- Gain and Level controls for precise sound shaping \- Can be powered by a 9V battery or AC operation \- Compact dimensions: 2-3/4"W x 1-1/2"H x 3-7/8"D \- Weight (without battery): 8 oz. The pedal is suitable for guitar and bass use, providing a wide range of tonal options from subtle boosts to creamy, violin-like tones. It is designed to create a singing sustain that lasts until the player releases the notes, and it can bring bass guitars to life as well.
EX2 Exciter
HD-2
HD-2 Harmonic Distortion
TZ-2
The Guyatone TZ-2, also known as "The Fuzz," is a retro-style fuzz effect pedal based on the vintage Univox Superfuzz. It is designed to create distortion using methods other than waveform clipping, producing a sawtooth waveform that yields a ruder and cruder tone with a substantial low-end, making it suitable for use with both bass and guitar. The pedal's circuit contains a diode ring, which is used to add upper octave tones to an input signal. The upper octave tracks particularly well and is smoother and more subtle than most boutique octavia clones currently on the market. It even tracks well on bass, creating a unique, synth-like tone on upper register notes. Additionally, playing double stops or chords through the TZ-2 will produce atonal, clangorous tones similar to a ring modulator, making it suitable for special effects and unconventional applications. Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Amplitude: +30dB \- Power Voltage: DC9V (Battery) / DC9 V (AC Adaptor) \- Current Consumption: 6 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 8.0 oz The TZ-2 Fuzz offers distortion, octavia, and ring modulator effects in a compact form factor, making it a versatile tool for musicians seeking a range of analog effects from a single pedal.
EQ
PS-008
The Guyatone PS-008 Parametric Equalizer is a vintage guitar effect pedal with the following technical specifications: \- Input Impedance: 330 K ohm \- Maximum Input Level: 0dB \- Output Impedance: 10 K ohm \- Maximum Output Level: +6 dB \- Signal-to-Noise Ratio: -90dB \- Frequency Characteristics: 20-20,000Hz +/- 1dB \- Gain: +/- 18dB \- Frequency Variable Range: 70-5,000Hz \- Band Width: 7-1 octave \- Power: Battery DC 9 Volt / AC adaptor \- Battery Drain: 6mA \- Switching System: "Noiseless" Solid state type \- Overall Size: 68 (W) x 53 (H) x 120 (D) mm \- Weight: 370g The pedal features controls for Gain, Width, and Frequency, allowing users to adjust the emphasis or attenuation of specific frequency bands. It is designed to provide precise tone sculpting for guitar and bass instruments, making it suitable for a wide range of musical styles and genres.
EX2 Exciter
Fuzz
SD2 Sustainer D
The Guyatone SD2 Sustainer D is a versatile pedal designed to provide compression, sustain, and distortion in one unit. It offers a range of features and specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Max Amplitude: +40dB \- Gain and Level controls for precise sound shaping \- Can be powered by a 9V battery or AC operation \- Compact dimensions: 2-3/4"W x 1-1/2"H x 3-7/8"D \- Weight (without battery): 8 oz. The pedal is suitable for guitar and bass use, providing a wide range of tonal options from subtle boosts to creamy, violin-like tones. It is designed to create a singing sustain that lasts until the player releases the notes, and it can bring bass guitars to life as well.
FS-5 Wah-Fuzz
Crazy Face
TZm5 Torrid Fuzz
The Guyatone TZm5 Torrid Fuzz is a compact and versatile fuzz pedal designed by Toshi Torii of HAO pedals. It offers a variety of wild and wooly tones that can emulate classic fuzz pedals or create all-new fuzz effects. The pedal features the following controls: 1\. LEVEL: Adjusts the output level when the effect is engaged. 2\. TONE: Adjusts the tone of the effect, with a counter-clockwise turn cutting high frequency. 3\. DEPTH: Adjusts the strength of distortion, with a clockwise turn increasing distortion. 4\. PHASE: Adjusts the phase of the output signal, with a positive phase providing a thicker, chunkier sound and a negative phase offering a thinner, more treble-focused old school fuzz flavor. 5\. ATTENUATOR: Selects the proper input sensitivity against output level from connected instruments. The standard setting is at the MAX position, with a counterclockwise turn reducing input signal if sound is distorted due to high input signal. The pedal also features an input attenuator (mini trimmer) and a 'Phase' +/- switch, which significantly impacts the overall tone of the fuzz. The TZm5 is designed to be optimized for single coils or humbuckers, offering a wide range of fuzz effects in a pint-sized package. The TZm5 is part of Guyatone's Mighty Micro series, featuring a compact design with three full-size pots for main controls, a mini toggle switch, and a mini trimmer control. It uses true bypass switching and has top-mounted input, output, and DC power jacks, as well as a top-mounted battery compartment for quick access. Overall, the Guyatone TZm5 Torrid Fuzz is a small pedal with a big sound, offering versatility and a wide range of fuzz effects in a compact form factor.
TZ-2
The Guyatone TZ-2, also known as "The Fuzz," is a retro-style fuzz effect pedal based on the vintage Univox Superfuzz. It is designed to create distortion using methods other than waveform clipping, producing a sawtooth waveform that yields a ruder and cruder tone with a substantial low-end, making it suitable for use with both bass and guitar. The pedal's circuit contains a diode ring, which is used to add upper octave tones to an input signal. The upper octave tracks particularly well and is smoother and more subtle than most boutique octavia clones currently on the market. It even tracks well on bass, creating a unique, synth-like tone on upper register notes. Additionally, playing double stops or chords through the TZ-2 will produce atonal, clangorous tones similar to a ring modulator, making it suitable for special effects and unconventional applications. Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Amplitude: +30dB \- Power Voltage: DC9V (Battery) / DC9 V (AC Adaptor) \- Current Consumption: 6 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 8.0 oz The TZ-2 Fuzz offers distortion, octavia, and ring modulator effects in a compact form factor, making it a versatile tool for musicians seeking a range of analog effects from a single pedal.
Overdrive and Boost
OD2 Overdrive
The Guyatone OD2 Overdrive pedal is a compact effects pedal designed to provide versatile overdrive tones for guitarists. The pedal features a compact design with dimensions of 2.75" W x 3.875" L x 1.5" H and weighs 7.6 oz (without battery). The input impedance is 470K ohm, and it utilizes a 1/4 inch standard phone jack for input. The OD2 Overdrive pedal is equipped with the JRC 9449G IC chip, which is the in-line equivalent to the legendary JRC 4558 IC, known for its warm, tube-like voice. The pedal offers a simple two-knob overdrive effect with a small pedalboard footprint. It features a Level knob for adjusting the output volume, a Tone knob for adjusting the output tone with emphasis on the high- frequency range (Hi-cut Hi-boost), and a Gain knob for adjusting the overdrive level. Additionally, the OD2 Overdrive pedal includes a Mode switch with three settings: \- S (Shallow): Clean boost to crunch sound \- M (Middle): Vintage drive sound \- D (Deep): Classic tube saturation The pedal is designed to provide a transparent, non-compressed overdrive that responds to picking dynamics and cleans up when the guitar volume is lowered. It aims to reproduce the original guitar signal accurately, offering a smooth, transparent overdrive with a bigger, thicker bottom compared to traditional overdrives.
PS-005
PS-005 Overdrive
Power Utilities
MD3 Micro Digital Delay
The Guyatone MD3 Micro Digital Delay is a compact and versatile delay pedal designed to offer a wide range of classic delay effects. Here are the technical specifications and features: Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Delay Time: \- 1: 20 - 160m/sec \- 2: 80 - 650m/sec \- 3: 330 - 2600m/sec \- Power Voltage: DC9V (Battery) / DC9V (AC Adaptor DC9V/200 mA (Center -/Sleeve +)) \- Current Consumption: 60 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 8.3 oz Features: \- Offers authentic note reproduction with crispness and clarity similar to a tape echo combined with the longer delay time of a digital unit \- Controls react like an analog unit, providing a familiar user experience \- Self-oscillation feature at higher feedback settings for creating unique sound effects \- Lower current draw compared to other digital units, resulting in longer battery life Use Cases: \- Suitable for creating classic delay effects ranging from Rockabilly slapback to Arena-rock washes of excess \- Capable of multi-layering short parts to create beautiful, ethereal soundscapes The MD3 Micro Digital Delay is designed to provide high-quality delay effects in a compact and user-friendly package, making it suitable for a wide range of musical styles and applications.
SD2 Sustainer D
The Guyatone SD2 Sustainer D is a versatile pedal designed to provide compression, sustain, and distortion in one unit. It offers a range of features and specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Max Amplitude: +40dB \- Gain and Level controls for precise sound shaping \- Can be powered by a 9V battery or AC operation \- Compact dimensions: 2-3/4"W x 1-1/2"H x 3-7/8"D \- Weight (without battery): 8 oz. The pedal is suitable for guitar and bass use, providing a wide range of tonal options from subtle boosts to creamy, violin-like tones. It is designed to create a singing sustain that lasts until the player releases the notes, and it can bring bass guitars to life as well.
OD2 Overdrive
The Guyatone OD2 Overdrive pedal is a compact effects pedal designed to provide versatile overdrive tones for guitarists. The pedal features a compact design with dimensions of 2.75" W x 3.875" L x 1.5" H and weighs 7.6 oz (without battery). The input impedance is 470K ohm, and it utilizes a 1/4 inch standard phone jack for input. The OD2 Overdrive pedal is equipped with the JRC 9449G IC chip, which is the in-line equivalent to the legendary JRC 4558 IC, known for its warm, tube-like voice. The pedal offers a simple two-knob overdrive effect with a small pedalboard footprint. It features a Level knob for adjusting the output volume, a Tone knob for adjusting the output tone with emphasis on the high- frequency range (Hi-cut Hi-boost), and a Gain knob for adjusting the overdrive level. Additionally, the OD2 Overdrive pedal includes a Mode switch with three settings: \- S (Shallow): Clean boost to crunch sound \- M (Middle): Vintage drive sound \- D (Deep): Classic tube saturation The pedal is designed to provide a transparent, non-compressed overdrive that responds to picking dynamics and cleans up when the guitar volume is lowered. It aims to reproduce the original guitar signal accurately, offering a smooth, transparent overdrive with a bigger, thicker bottom compared to traditional overdrives.
VT-3
The Guyatone VT-3 Vintage Tremolo pedal offers vintage tremolo effects with a simple two-knob configuration. It is designed to produce deep and warm blackface tremolo sounds. The pedal features an input impedance of 470K ohm, output impedance of 1k ohm, and a maximum input level of 1V. The speed frequency ranges from 0.1 to 10Hz, and it operates at a power voltage of DC9V. The pedal's dimensions are 2.75" W x 3.875" L x 1.5" H, and it weighs 7.6 oz (without battery). The VT-3 Vintage Tremolo is known for its tight, pulsing sine-wave tremolo that captures the classic tremolo sounds of the past. It also offers speed and intensity controls, allowing users to adjust the effect from slow, barely audible dips to fast, shimmering stabs. The pedal includes a slight level boost to ensure the performance won't go unnoticed.
EX2 Exciter
Chorus Box
The Guyatone Chorus Box, also known as the Guyatone PS-023 Chorus Box, is a versatile effects pedal designed to deliver chorus, flanger, and vibrato effects. The pedal offers the following technical specifications: \- Input Impedance: 1 MOhm \- Maximum Input Level: 2V \- Output Impedance: Less than 10 kOhms \- Maximum Output Voltage: 1V (effect) \- Power Source: DC 9V \- Power Consumption: 14 mA \- Dimensions: 74mm (W) x 56mm (H) x 122mm (D) \- Weight: 385g The Chorus Box features controls for adjusting the center setting of the selected effect, depth, rate, and resonance or feedback. It also includes a switch for toggling between chorus, vibrato, and flanger modes. The pedal is designed to provide a wide range of modulation effects suitable for various musical styles and applications. It is built with high-quality components and is made in Japan, reflecting Guyatone's reputation for producing reliable and innovative effects pedals.
WR-3
The Guyatone WR-3, also known as the Wah Rocker, is an envelope-controlled band-pass filter pedal designed for guitar and bass. It features the following technical specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Filter Frequency Range: 250Hz - 3KHz \- Power Voltage: DC9V (Battery/AC Adaptor) \- Current Consumption: 6 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 6.6 oz The WR-3 offers several updates that greatly improve its functionality and performance compared to the original model. It includes controls for Threshold, Decay, Range, Gain, Blend, and a Guitar/Bass switch. The Range Control allows for adjusting the overall frequency band in which the filter is sweeping, while the Gain Control adjusts the output level of the pedal. The Blend Control provides a continuously variable blend, and the Guitar/Bass switch incorporates the sounds of the Guyatone BR-2 Bottom Wah Rocker. Additionally, the WR-3 features TWA’s proprietary S3™ “Shortest Send Switching” for transparent bypass tone. The pedal is designed to provide super-funky, versatile, and legendary Wah Rocker sounds for both guitar and bass players.
PS-005 Overdrive
WR2 Wah Rocker
The Guyatone WR2 Wah Rocker is an auto-wah pedal known for its unique envelope filter effect. It has been used by renowned musicians such as Lenny Kravitz, Stevie Salas, TM Stevens, Sass Jordan, David Torn, Bill Laswell, and Powerman 5000. The pedal features controls for threshold and decay, allowing users to create a wide variety of auto-wah effects. The high threshold settings yield synth-like filter sweeps, while lower settings produce throaty tones reminiscent of a half-cocked wah pedal. The WR2's band-pass filtering makes it ideal for use with electric guitars and keyboards, and it is also used by many bass players with a dry signal mixed in for added low-end beef. Technical Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Filter Frequency Range: 250Hz - 3KHz \- Power Voltage: DC9V (Battery/AC Adaptor) \- Current Consumption: 6 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 6.6 oz The WR2 Wah Rocker is a versatile pedal suitable for musicians looking to add a unique "special sauce" to their sound, particularly for funk and envelope filter effects.
PS-103 Driving Box Compressor
The Guyatone PS-103 Driving Box Compressor is an analog compressor pedal produced in Japan in the mid-1970s. It features responsive and smooth compression, with simple Output and Sensitivity controls that belie a wide array of adjustable compression. The circuit includes a metal can CA3080 IC chip, delivering a low noise floor and functioning decently well as a limiter depending on user inputs. The pedal allows the player to pre-set a limited level of output which, while maintaining a constant volume, will produce a clean, undistorted sustain.
PS-006
The Guyatone PS-006 Analog Echo pedal is a vintage echo effect with specific technical specifications. The pedal features a power requirement of a 9-volt battery or AC adaptor. It utilizes a "noiseless" solid-state switching system and has overall dimensions of 68mm (W) x 53mm (H) x 120mm (D). The pedal is designed to provide warm analog echo tones and is suitable for use in guitar effects setups. The specific design and functionality details beyond these specifications are not available in the search results.
PS-002 Chorus
Wah Rocker WR3
The Wah Rocker WR3 by Guyatone is an envelope filter pedal known for its squawky, slippery, and super-funked-up filtering capabilities. The TWA WR-03, based on the original WR-3 circuit, offers several updates that enhance its functionality and performance compared to the original. Key Features and Controls: 1\. Range Control: Allows the user to adjust the overall frequency band in which the filter is sweeping, enabling fine-tuning of the filter sweep without adjusting playing dynamics. 2\. Gain Control: Adjusts the output level of the pedal from unity gain to a healthy boost, ensuring it doesn't get lost in a dense mix. 3\. Blend Control: Features a continuously variable Blend control, providing a much beefier bottom-end and a wider variety of tones. 4\. Guitar/Bass Switch: Incorporates the sounds of the Guyatone BR-2 Bottom Wah Rocker, offering a super-fat, low-end swamp for bass players. 5\. S3™ “Shortest Send Switching”: A form of True Bypass that uses electronic relays combined with a mechanical switch, guaranteeing the most transparent bypass tone available. Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Filter Frequency Range: 250Hz Use Cases: The Wah Rocker WR3 is suitable for guitarists and bassists looking to achieve funky, expressive filtering effects in their playing. It has been used by renowned musicians such as Guthrie Govan, Lenny Kravitz, and Justin Chancellor (Tool), among others. The TWA WR-03 Wah Rocker brings the legendary sounds of the Wah Rocker back for everyone to enjoy and employ, making it a versatile and sought-after pedal for funk, rock, and experimental music genres.
HD-2 Harmonic Distortion
WRm5 Wah Rocker
The Guyatone Mighty Micro WRm5 Wah Rocker Guitar Effects Pedal offers improved control over the funky filter circuitry. The pedal features the following technical specifications: \- Controls: Level, Decay, Threshold, Response \- Jacks: Input, Output, DC IN \- Switch: Effect On/Off (True Bypass), BLEND (On/Off) \- Indicator: Effect On/Off \- Input Impedance: 470 kOhm \- Output Impedance: Less than 10 kOhm \- Current Consumption: 8.5 mA (at effect ON) \- Power Requirement: DC 9V 006P (6F22)/AC-2 Adaptor \- Dimensions: 2-3/5" W x 2-3/10" H x 3-9/10" D \- Weight: 234 g (without battery) / 8.25 oz. \- Warranty: 3-year Guyatone parts and labor The pedal's cast-aluminum chassis offers a compact size, light weight, and durability. It also features True Bypass Switching (TBS) using proprietary Guyatone switch. The WRm5 Wah Rocker is designed to provide musicians with enhanced control and flexibility over their wah effects, making it suitable for a wide range of musical styles and applications.
TZm5 Torrid Fuzz
The Guyatone TZm5 Torrid Fuzz is a compact and versatile fuzz pedal designed by Toshi Torii of HAO pedals. It offers a variety of wild and wooly tones that can emulate classic fuzz pedals or create all-new fuzz effects. The pedal features the following controls: 1\. LEVEL: Adjusts the output level when the effect is engaged. 2\. TONE: Adjusts the tone of the effect, with a counter-clockwise turn cutting high frequency. 3\. DEPTH: Adjusts the strength of distortion, with a clockwise turn increasing distortion. 4\. PHASE: Adjusts the phase of the output signal, with a positive phase providing a thicker, chunkier sound and a negative phase offering a thinner, more treble-focused old school fuzz flavor. 5\. ATTENUATOR: Selects the proper input sensitivity against output level from connected instruments. The standard setting is at the MAX position, with a counterclockwise turn reducing input signal if sound is distorted due to high input signal. The pedal also features an input attenuator (mini trimmer) and a 'Phase' +/- switch, which significantly impacts the overall tone of the fuzz. The TZm5 is designed to be optimized for single coils or humbuckers, offering a wide range of fuzz effects in a pint-sized package. The TZm5 is part of Guyatone's Mighty Micro series, featuring a compact design with three full-size pots for main controls, a mini toggle switch, and a mini trimmer control. It uses true bypass switching and has top-mounted input, output, and DC power jacks, as well as a top-mounted battery compartment for quick access. Overall, the Guyatone TZm5 Torrid Fuzz is a small pedal with a big sound, offering versatility and a wide range of fuzz effects in a compact form factor.
Phasers
PS-003
The Guyatone PS-003 Compressor is a vintage 1980s pedal manufactured by Guyatone/Tokyo Sound Co. It is designed with the following technical specifications: \- Power: Battery DC 9 Volt / AC adaptor \- Switching System: "Noiseless" Solid state type \- Overall Size: 68 (W) x 53 (H) x 120 (D) mm \- Controls: Level, Sustain, Brilliance The pedal is suitable for use with guitars and other musical instruments, providing compression and sustain effects. It features a noiseless solid-state switching system and can be powered by a 9-volt battery or an AC adaptor. The compact dimensions make it suitable for pedalboard integration.
PS-007
Chorus Box
The Guyatone Chorus Box, also known as the Guyatone PS-023 Chorus Box, is a versatile effects pedal designed to deliver chorus, flanger, and vibrato effects. The pedal offers the following technical specifications: \- Input Impedance: 1 MOhm \- Maximum Input Level: 2V \- Output Impedance: Less than 10 kOhms \- Maximum Output Voltage: 1V (effect) \- Power Source: DC 9V \- Power Consumption: 14 mA \- Dimensions: 74mm (W) x 56mm (H) x 122mm (D) \- Weight: 385g The Chorus Box features controls for adjusting the center setting of the selected effect, depth, rate, and resonance or feedback. It also includes a switch for toggling between chorus, vibrato, and flanger modes. The pedal is designed to provide a wide range of modulation effects suitable for various musical styles and applications. It is built with high-quality components and is made in Japan, reflecting Guyatone's reputation for producing reliable and innovative effects pedals.
PS-006
The Guyatone PS-006 Analog Echo pedal is a vintage echo effect with specific technical specifications. The pedal features a power requirement of a 9-volt battery or AC adaptor. It utilizes a "noiseless" solid-state switching system and has overall dimensions of 68mm (W) x 53mm (H) x 120mm (D). The pedal is designed to provide warm analog echo tones and is suitable for use in guitar effects setups. The specific design and functionality details beyond these specifications are not available in the search results.
PS-002 Chorus
Tremolo
VT-3
The Guyatone VT-3 Vintage Tremolo pedal offers vintage tremolo effects with a simple two-knob configuration. It is designed to produce deep and warm blackface tremolo sounds. The pedal features an input impedance of 470K ohm, output impedance of 1k ohm, and a maximum input level of 1V. The speed frequency ranges from 0.1 to 10Hz, and it operates at a power voltage of DC9V. The pedal's dimensions are 2.75" W x 3.875" L x 1.5" H, and it weighs 7.6 oz (without battery). The VT-3 Vintage Tremolo is known for its tight, pulsing sine-wave tremolo that captures the classic tremolo sounds of the past. It also offers speed and intensity controls, allowing users to adjust the effect from slow, barely audible dips to fast, shimmering stabs. The pedal includes a slight level boost to ensure the performance won't go unnoticed.
VT-X
The Guyatone VT-X Vintage Tremolo pedal is a meticulously designed unit that offers a range of features and functionality. The pedal is housed in a rugged- yet-portable steel chassis, measuring 3.5" in width, 5.125" in length, and 1.5" in height, with a weight of 15.0 oz (without battery). It is powered by a single, shock-mounted 12AX7WA tube, drawing power from an external 12V DC power adapter, which eliminates transformer hum and grounding problems that can lead to excessive noise levels. The VT-X Vintage Tremolo pedal features controls for speed, intensity, and tone, allowing the user complete control over the degree of tremolo effect. It offers warm, thick, throbbing tremolo that solid-state circuits cannot match. Additionally, the pedal includes dual outputs for true stereo imaging by panning the tremolo effect between two amplifiers. This pedal is designed to replicate the classic tube tremolo tones without the hassle and expense of vintage gear. It is suitable for both live and studio performances, with an effect LED indicator and electronic silent switching. Overall, the Guyatone VT-X Vintage Tremolo pedal is a versatile and robust unit that provides high-quality tube tremolo tones, making it a valuable addition to any guitarist's setup.
Wah Wah
FS-5 Wah-Fuzz
WR-3
The Guyatone WR-3, also known as the Wah Rocker, is an envelope-controlled band-pass filter pedal designed for guitar and bass. It features the following technical specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Filter Frequency Range: 250Hz - 3KHz \- Power Voltage: DC9V (Battery/AC Adaptor) \- Current Consumption: 6 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 6.6 oz The WR-3 offers several updates that greatly improve its functionality and performance compared to the original model. It includes controls for Threshold, Decay, Range, Gain, Blend, and a Guitar/Bass switch. The Range Control allows for adjusting the overall frequency band in which the filter is sweeping, while the Gain Control adjusts the output level of the pedal. The Blend Control provides a continuously variable blend, and the Guitar/Bass switch incorporates the sounds of the Guyatone BR-2 Bottom Wah Rocker. Additionally, the WR-3 features TWA’s proprietary S3™ “Shortest Send Switching” for transparent bypass tone. The pedal is designed to provide super-funky, versatile, and legendary Wah Rocker sounds for both guitar and bass players.
WR2 Wah Rocker
The Guyatone WR2 Wah Rocker is an auto-wah pedal known for its unique envelope filter effect. It has been used by renowned musicians such as Lenny Kravitz, Stevie Salas, TM Stevens, Sass Jordan, David Torn, Bill Laswell, and Powerman 5000. The pedal features controls for threshold and decay, allowing users to create a wide variety of auto-wah effects. The high threshold settings yield synth-like filter sweeps, while lower settings produce throaty tones reminiscent of a half-cocked wah pedal. The WR2's band-pass filtering makes it ideal for use with electric guitars and keyboards, and it is also used by many bass players with a dry signal mixed in for added low-end beef. Technical Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Filter Frequency Range: 250Hz - 3KHz \- Power Voltage: DC9V (Battery/AC Adaptor) \- Current Consumption: 6 mA \- Dimensions: 2.75" W x 3.875" L x 1.5" H \- Weight (w/o battery): 6.6 oz The WR2 Wah Rocker is a versatile pedal suitable for musicians looking to add a unique "special sauce" to their sound, particularly for funk and envelope filter effects.
WR-2
The Guyatone WR-2 Wah Rocker is an auto-wah pedal that was produced in Japan during the 1980s. The pedal features controls for threshold and decay, which respond to the player's dynamics. The variable threshold determines the strength of the effect, while the decay control determines the speed of the effect. The WR-2's band-pass filtering makes it ideal for use with electric guitars and keyboards. Additionally, many bass players use it with a dry signal mixed in for added low-end beef. The WR-2 Wah Rocker is known for its unmistakable mid-range quack, earning it the nickname "Duck Box." It has been a secret weapon for many professional musicians and has appeared on recordings by artists such as Lenny Kravitz, Stevie Salas, TM Stevens, Sass Jordan, David Torn, Bill Laswell, and Powerman 5000. The pedal's high threshold settings yield synth-like filter sweeps, while lower settings produce throaty tones reminiscent of a half-cocked wah pedal. Pound for pound, it's considered the funkiest filter that money can buy.
Wah Rocker WR3
The Wah Rocker WR3 by Guyatone is an envelope filter pedal known for its squawky, slippery, and super-funked-up filtering capabilities. The TWA WR-03, based on the original WR-3 circuit, offers several updates that enhance its functionality and performance compared to the original. Key Features and Controls: 1\. Range Control: Allows the user to adjust the overall frequency band in which the filter is sweeping, enabling fine-tuning of the filter sweep without adjusting playing dynamics. 2\. Gain Control: Adjusts the output level of the pedal from unity gain to a healthy boost, ensuring it doesn't get lost in a dense mix. 3\. Blend Control: Features a continuously variable Blend control, providing a much beefier bottom-end and a wider variety of tones. 4\. Guitar/Bass Switch: Incorporates the sounds of the Guyatone BR-2 Bottom Wah Rocker, offering a super-fat, low-end swamp for bass players. 5\. S3™ “Shortest Send Switching”: A form of True Bypass that uses electronic relays combined with a mechanical switch, guaranteeing the most transparent bypass tone available. Specifications: \- Input Impedance: 470K ohm \- Output Impedance: 1k Ohm \- Max Input Level: 1V \- Max Output Level: 1V \- Filter Frequency Range: 250Hz Use Cases: The Wah Rocker WR3 is suitable for guitarists and bassists looking to achieve funky, expressive filtering effects in their playing. It has been used by renowned musicians such as Guthrie Govan, Lenny Kravitz, and Justin Chancellor (Tool), among others. The TWA WR-03 Wah Rocker brings the legendary sounds of the Wah Rocker back for everyone to enjoy and employ, making it a versatile and sought-after pedal for funk, rock, and experimental music genres.