Boost 'n' Buff

The Boost 'n' Buff by MI Audio is a versatile booster and buffer pedal designed to enhance guitar tone and signal strength. Here are the technical specifications and features: \- Handmade in Sydney, Australia with a 5-year warranty \- Bypass: Heavy Duty 3PDT footswitch with Buffered Bypass \- Power: 9V Battery or 9VDC power supply only; 2.1mm jack, negative center \- Internal Voltage Supply: 24VDC \- Current draw: 10mA \- Input Impedance: 5MΩ \- Output Impedance: <10kΩ with boost on, <0.1kΩ with the boost off (buffer on) \- Controls: Volume, Gain, EQ Mode switch; FULL, MID, TREBLE \- Enclosure: Durable powder coat and screen print \- Size: 2.2″ x 4.3″ (55.9mm x 109.2mm) The Boost 'n' Buff features a switchable buffer, allowing users to choose between the buffer or true bypass, providing flexibility in signal routing. In 'Buff' mode, it acts as an ultra-high input impedance/low noise buffer, maintaining the natural bandwidth of guitar pickups and reducing signal degradation over long cable runs. The pedal also offers three boost modes: Full Boost, Treble Boost, and Mid Boost, each tailored to different tonal enhancements. Additionally, the pedal includes a gain control for achieving mild dirt sounds, a volume control for up to 35dB output, and a crackle feature when adjusting the gain pot. It is also designed for easy use in FX loops, providing a secondary volume control with ample headroom. The Boost 'n' Buff v.5 is powered by 9V only and should not be operated at higher voltages. The pedal's internal circuitry is designed to provide approximately 24V from a 9V power source, eliminating the need for dual batteries or additional power supplies.

Neo Fuzz

The MI Audio Neo Fuzz is a vintage-style fuzz pedal designed with a focus on flexibility and control. Here are the technical specifications and features: \- Input Impedance: The pedal features a variable input impedance, allowing users to tune the fuzz pedal to different guitars and make it usable with humbuckers. \- Fuzz Amount: The Neo Fuzz offers a wide range of fuzz amount, from completely clean to over the top. \- Tone Controls: It includes comprehensive tone controls for adjusting lows and highs, providing flexibility in shaping the tone. \- Bias Control: Users can adjust the operating point of the transistors, allowing for a range of sounds from symmetrical fuzz to asymmetrical and gated synth-like tones. \- Output Volume: The pedal offers ample output volume and can be used to overdrive an amplifier. \- Controls: The pedal features a total of 6 external controls and one internal control, providing ultimate flexibility in shaping the fuzz tone. \- Germanium Transistors: Built around a pair of hand-selected early 70s NOS AC128 germanium transistors, the Neo Fuzz offers a vintage and smooth tone. \- Additional Features: The pedal also includes a 3-position bright switch, heavy-duty 3PDT True Bypass footswitch, and a 9V adaptor plug. The Neo Fuzz is hand-built with high-quality components and carries a 5-year warranty. It is designed for versatility and offers a wide range of vintage fuzz tones, making it suitable for various musical styles and use-cases.

Megalith Delta Effects Pedal

The Megalith Delta Effects Pedal by MI Audio is a high-gain distortion pedal designed to emulate the Megalith Delta high-gain tube amplifier's distortion characteristics. It utilizes a JFET transistor to simulate the gain stages of the preamp valves, providing a solid-state "model" of the Beta preamp. The pedal features a GAIN control with a wide sweep, allowing for solid rock tones, serious crunch, and dark shades of brutal distortion. The GAIN BOOST footswitch takes the pedal to its highest gain, tightening the response with an upper mid emphasis. The pedal includes a unique CONTOUR control, which affects the frequency response of the phase inverter in the power amp, allowing for adjustments from fat and midrangy to a scooped and tightened tone. The three-band EQ section, coupled with the EQ SHIFT SWITCH, provides a wide range of tonal control, offering different signature tones and traditional British or American voicings. The Megalith Delta also features an output section with voltage doubling circuitry, allowing the 9V supplied by a battery or DC adaptor to be increased to 18V within the pedal's circuitry, producing crushing low end without mush. Additionally, the V2 version of the pedal includes a GAIN TRIM for toning down the gain and a SPEAKER SIMULATED OUTPUT for direct recording or simultaneous applications. The pedal operates on 9V DC power, with true bypass switching and a medium- sized housing. It comes with a 5-year warranty and is designed and manufactured in Australia.

Neo Fuzz

The MI Audio Neo Fuzz is a vintage-style fuzz pedal designed with a focus on flexibility and control. Here are the technical specifications and features: \- Input Impedance: The pedal features a variable input impedance, allowing users to tune the fuzz pedal to different guitars and make it usable with humbuckers. \- Fuzz Amount: The Neo Fuzz offers a wide range of fuzz amount, from completely clean to over the top. \- Tone Controls: It includes comprehensive tone controls for adjusting lows and highs, providing flexibility in shaping the tone. \- Bias Control: Users can adjust the operating point of the transistors, allowing for a range of sounds from symmetrical fuzz to asymmetrical and gated synth-like tones. \- Output Volume: The pedal offers ample output volume and can be used to overdrive an amplifier. \- Controls: The pedal features a total of 6 external controls and one internal control, providing ultimate flexibility in shaping the fuzz tone. \- Germanium Transistors: Built around a pair of hand-selected early 70s NOS AC128 germanium transistors, the Neo Fuzz offers a vintage and smooth tone. \- Additional Features: The pedal also includes a 3-position bright switch, heavy-duty 3PDT True Bypass footswitch, and a 9V adaptor plug. The Neo Fuzz is hand-built with high-quality components and carries a 5-year warranty. It is designed for versatility and offers a wide range of vintage fuzz tones, making it suitable for various musical styles and use-cases.

G.I. Fuzz

The MI Audio G.I. Fuzz is a high gain fuzz pedal featuring a trio of ultra-low noise, high gain silicon transistors. It is designed to provide a versatile range of fuzz tones and is not a clone of any existing pedal. The G.I. Fuzz offers the following features: \- High gain silicon fuzz generated by a trio of high gain silicon transistors \- Ultimate flexibility with 8 controls (1 internal), including Fuzz, Load (input impedance control), Bias (controls the bias of the 2 transistors), Body (midrange control), Tone (balancing control for controlling highs and lows), Volume, Bright switch, and Internal Gain trimmer \- Professionally powder-coated and silk-screened enclosure, measuring only 4.3 * 2.2 inches \- A huge gain range, from nothing to sustain-for-days \- Can be used as a low gain device for a fat bluesy bite \- Internal gain trimmer to adjust the gain \- Load control for variable input impedance to match the G.I. Fuzz to different types of pickups \- Bias control to set up the operating point of the transistors \- Body control for full-range midrange control \- Tone control for controlling both lows and highs \- Volume control with output to spare \- 3-position bright switch to adjust the top end \- Heavy-duty 3PDT True Bypass footswitch for no tone loss when bypassed \- 9V adaptor plug (2.1mm barrel connection) \- Hand-made in Sydney, Australia, and comes with a 5-year warranty The G.I. Fuzz is designed to create a wide range of fuzz tones, from fat bluesy tones to traditional fuzz, all-out sustain, and gated, synth-like bleeps. It is suitable for guitarists looking for a versatile and high-quality fuzz pedal with precise control over their tone.

GI Fuzz

The MI Audio GI Fuzz is a high gain fuzz pedal featuring a trio of ultra low noise, high gain silicon transistors. It is not a clone of any existing design and offers about 20dB more gain than a Fuzz Face. The pedal is designed for versatility, offering a wide range of controls and features for various use- cases. Key Features and Specifications: \- High gain fuzz generated by a trio of high gain silicon transistors \- 6 knobs for Fuzz, Load (input impedance control), Bias (controls the bias of the 2 transistors), Body (midrange control), Tone (balancing control for highs and lows), and Volume \- Bright switch for taming the top end \- Internal gain trimmer for adjusting the gain range \- Professionally powder-coated and silk-screened enclosure, measuring 4.3" x 2.2" \- 3 position switch for ultimate flexibility \- Ability to create anything from fat bluesy tones, to traditional fuzz, to all-out sustain, to gated, synth-like bleeps \- 9V adaptor plug (2.1mm barrel connection) \- Super quiet operation due to its unique design \- High quality overrated components for rock-solid reliability \- Hand-made in Sydney, Australia with a 5-year warranty The pedal's design allows for a huge gain range, from low gain for a fat bluesy bite to sustain-for-days high gain. It also features a load control for variable input impedance, a bias control for setting up the operating point of the transistors, and a body control for full-range midrange adjustment. Additionally, the tone control balances lows and highs, and the volume control offers ample output. The GI Fuzz is designed to be versatile and reliable, suitable for a wide range of guitar tones and playing styles.

Pollyanna

Boost 'n' Buff

The Boost 'n' Buff by MI Audio is a versatile booster and buffer pedal designed to enhance guitar tone and signal strength. Here are the technical specifications and features: \- Handmade in Sydney, Australia with a 5-year warranty \- Bypass: Heavy Duty 3PDT footswitch with Buffered Bypass \- Power: 9V Battery or 9VDC power supply only; 2.1mm jack, negative center \- Internal Voltage Supply: 24VDC \- Current draw: 10mA \- Input Impedance: 5MΩ \- Output Impedance: <10kΩ with boost on, <0.1kΩ with the boost off (buffer on) \- Controls: Volume, Gain, EQ Mode switch; FULL, MID, TREBLE \- Enclosure: Durable powder coat and screen print \- Size: 2.2″ x 4.3″ (55.9mm x 109.2mm) The Boost 'n' Buff features a switchable buffer, allowing users to choose between the buffer or true bypass, providing flexibility in signal routing. In 'Buff' mode, it acts as an ultra-high input impedance/low noise buffer, maintaining the natural bandwidth of guitar pickups and reducing signal degradation over long cable runs. The pedal also offers three boost modes: Full Boost, Treble Boost, and Mid Boost, each tailored to different tonal enhancements. Additionally, the pedal includes a gain control for achieving mild dirt sounds, a volume control for up to 35dB output, and a crackle feature when adjusting the gain pot. It is also designed for easy use in FX loops, providing a secondary volume control with ample headroom. The Boost 'n' Buff v.5 is powered by 9V only and should not be operated at higher voltages. The pedal's internal circuitry is designed to provide approximately 24V from a 9V power source, eliminating the need for dual batteries or additional power supplies.

Blues Pro

The MI Audio Blues Pro is a versatile overdrive pedal designed to deliver low to mid-gain overdrive tones. It features a heavy-duty die-cast enclosure with true bypass functionality. The pedal's dimensions are 2.2″ x 4.3″ (55.9mm x 109.2mm). The controls include Volume, Drive, Detail, Body, and Trim, offering users a wide range of tonal shaping options. The Detail control provides flexibility by adjusting both high and low- frequency content, allowing users to achieve a more open-sounding overdrive or a smoother, mid-rich tone. The Body control adds bass/low-mid boost, providing options for a more mid-focused traditional Blues Pro tone or a looser feel comparable to overdriven Fender combos. The Trim control acts as a second gain control, affecting the gain in a different part of the amplification circuit. The pedal also features a clipping structure with toggle switches, allowing users to select between silicon diodes, MOSFET transistors, and no clippers, providing a wide range of overdrive characteristics, from classic mid-hump drive to compressed fuzz. The internal voltage multiplier circuit increases the 9V power supply to approximately 18V, offering increased headroom, clarity, and sparkle. The pedal is powered by a 9VDC power supply or a 9V battery, with a standard barrel jack and negative center pin. The power consumption is 10 mA. The MI Audio Blues Pro is an analog pedal with true bypass functionality, providing guitarists with a boutique overdrive effect. It is designed and manufactured by MI Audio PTY. LTD. in Australia.

Cross Over Drive

The MI Audio Cross Over Drive is a versatile pedal designed to bridge the gap between boost, tone enhancement, touch-sensitive overdrive, and fuzz. Handmade in Sydney, Australia, it features a 5-year warranty and a heavy-duty 3PDT footswitch for true bypass. The pedal is housed in a durable powder-coated enclosure and can be powered by a 9V battery or an external 9V DC power supply with a negative center pin. The current draw is 5mA, and the input impedance is 500kΩ, while the output impedance is less than 25kΩ. The Cross Over Drive is built around four FET transistors, meticulously designed to capture the response and touch-sensitivity of an amp's organic overdrive. It offers three distinct gain modes: low gain, standard, and tight mode, each providing a different tonal character and response. The gain control allows for a wide range of saturation, from boost/light breakup to smooth, touch-sensitive overdrive, and finally to smooth fuzz. The pedal features two tone controls, Balance and Detail, which provide flexibility in adjusting the character of the overdrive. The Balance control adjusts the high-frequency band relative to the low frequencies, while the Detail control is a high-frequency roll-off, allowing for precise tonal shaping. The Volume control adjusts the output volume of the pedal. The Cross Over Drive also includes a mode switch, offering additional flexibility with the original Standard (STD) mode, Low mode for bluesier tones with enhanced touch dynamics, and Tight mode for higher gain and a more pronounced upper mid focus. Overall, the MI Audio Cross Over Drive is a compact, handcrafted pedal that offers a wide range of tonal possibilities, making it a valuable addition to any guitarist's setup.

Super Blues Pro

The Super Blues Pro by MI Audio is a versatile overdrive pedal designed to offer a wide range of low to mid-gain overdrive tones. Here are the technical specifications and features: \- **Dimensions**: 60 x 34 x 112 mm \- **Controls**: \- **Detail**: Provides flexibility of a multi-band EQ, controlling high and low frequency content of the signal. \- **Body**: Adjusts bass/low-mid boost, allowing for a more mid-focused or low-end heavy tone. \- **Trim**: Acts as a secondary gain control, affecting the gain in a different part of the amplification circuit. \- **Clipping Structure**: Features two toggle switches for complete control of the pedal’s clipping structure, offering options for silicon diodes, MOSFET transistors, and no clippers to provide various overdrive tones. \- **Gain and Volume Control**: Offers a wider gain range, with the volume control providing maximum output volume. \- **Powering the Pedal**: Designed to run off 9V only, either through a 9V battery or a 9V DC power adaptor. The pedal internally operates at approximately 18V for extra clarity, sparkle, and headroom. \- **Registration & Warranty**: The pedal carries a 5-year warranty covering repairs due to manufacturer error. The Super Blues Pro is known for its classic compressed, mid-hump overdrive, surrounded by many more options for custom overdrive tones. It allows for a low-gain boost, harmonic blues solo tone, or super-compressed fuzz, making it suitable for a wide range of musical styles and applications.

Tube Zone

The MI Audio Tube Zone Overdrive pedal is a versatile and flexible tool designed to deliver a wide range of overdrive tones. It is equipped with six external controls, providing users with precise control over their desired sound. The pedal features a wide-ranging DRIVE control, allowing for seamless transition from transparent overdrive to high gain. Additionally, it includes the MI tonal shaping controls of BRIGHT, TONE, MIDS, and CHARACTER, offering comprehensive tonal customization. The specific technical specifications of the MI Audio Tube Zone Overdrive pedal are as follows: \- GAIN: Unique taper for excellent control over overdrive \- TONE: High/Low balancing control \- VOLUME: Output up to 15Vpp with the correct power supply \- MIDS: Dedicated midrange control \- CHARACTER: Adds 'momentum' to guitar notes or keeps things tight \- BRIGHTNESS: Controls top-end content and helps match the Tube Zone to different amps \- PRESENCE (INTERNAL): Further aids in dialing in the Tube Zone’s tone The pedal is designed to mimic the signal path of modern valve amps by clipping the signal up to four times, providing a valve amp-like response. It is also equipped with a True Bypass switching feature for seamless integration into any pedalboard setup. The MI Audio Tube Zone Overdrive pedal is suitable for a wide range of use- cases, excelling equally well in low and high gain settings. It offers unparalleled flexibility and precise control over overdrive tones, making it a valuable addition to any guitarist's arsenal.