Le Bass

The Le Bass by Two Notes is a versatile tube preamp pedal designed for bass players. It features a True High Voltage Design running internally at 200 volts to preserve the interaction between the player and the instrument. The preamp offers two independent channels, each with its own voicing and EQ section. Channel A provides a lower gain tube stage with a pre-gain EQ, while Channel B offers more gain and a powerful post-EQ with mid sweep. The exclusive Fusion modes, "Hot Fusion" and "Cold Fusion," open up new tonal possibilities by cascading or blending the two channels. The pedal includes two channel footswitches for A and B, allowing seamless switching between channels and activating the Fusion mode. It also supports MIDI connectivity for remote control and seamless integration into pedalboard switching systems. The Le Bass features an FX loop, speaker simulation, balanced DI output, ground lift, and a headphones output for silent practice. The analog speaker simulation is specifically voiced for the Le Bass model and is based on the Torpedo simulator. The pedal can be used in various configurations, such as a boost or distortion pedal for an amplifier, as a preamplifier connected to a power amplifier and cabinets, or in a direct setup for recording. It is designed to work together with other Two Notes preamps, allowing for multi-channel configurations and complex pedalboard setups. The Le Bass operates on a 12V DC input, with a power consumption of approximately 6W and a current draw of 500mA. It has dimensions of 4.88" x 7.44" x 1.97".

ReVolt Bass Preamp Pedal

The ReVolt Bass Preamp Pedal by Two Notes is a 3-channel bass amp simulator and DI with an all-analog signal path. It features a 12AX7 preamp tube running at high voltage to inject warmth and bite into the tone. The pedal includes an integrated Drive Channel Dry/Wet Blend for enhanced tone-shaping and an expertly engineered Analog Cab Sim for seamless DI in studio or on stage. It also offers 4-Cable mode, FX Loop, and MIDI In/Out for effortless integration into existing setups. The three tonally distinct channels are inspired by an Ampeg SVT '76, a Marshall 1992 JMP Super Bass Mark II, and a custom proprietary high-gain bass amp designed for modern bass players. The channels provide iconic clean tones, vintage dirt, and modern drive with a switchable Dry/Wet Blend for added tonal versatility. The technical specifications of the ReVolt Bass Preamp Pedal are as follows: \- Input/Output: \- Input: Jack 6.35 mm (1/4”) unbalanced (TS, Tip/Sleeve) / Impedance: 1 MOhms \- Send: Jack 6.35mm (1/4“) unbalanced (TS) / Max output level: +11dBu / Impedance: 300 Ohms \- Return: Jack 6.35mm (1/4“) unbalanced (TS) / Max input level: +11dBu / Impedance: 1 MOhms / Unbuffered, directly connected to Output when active \- Output: Jack 6.35 mm (1/4”) unbalanced (TS) / Max output level: +11 dBu / Impedance: 300 Ohms \- DI Output: XLR, balanced / Impedance: 600 Ohms balanced, 300 Ohms unbalanced / Max output level: +11dBu / Protected against +48V phantom power \- Phones: Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve) / Impedance: 39 Ohms \- Aux In: Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve) / Impedance: 10 kOhms \- Dimensions & weight: \- Width x Depth x Height: 19.2cm x 11.7cm x 7.2cm – 7.6″ x 4.6″ x 2.8″ (Including connectors and knobs) \- Weight: 750 g / 1.65 lbs \- Power: \- Mains power adaptor \- DC Jack 2.1mm, negative center \- Input voltage: 12V DC \- Power consumption: Approx. 6W \- Current draw: 600mA The ReVolt Bass Preamp Pedal also includes the ReVolt: Series-B DynIR Cabinet Collection featuring 10 DynIR captures inspired by leading bass amplifier brands.

Opus Amp Simulator and DynIR Engine Pedal

Torpedo CAB M+

The Torpedo CAB M+ by Two Notes is a powerful pedal platform designed to provide the ideal foundation for building incredible tones without the need for amps or cabinets. It serves as a speaker cabinet simulator and a quiet stage solution, offering a comprehensive silent stage solution. The pedal features a carefully selected selection of 32 Two Notes cabinets, a clean preamp inspired by an all original '74 SilverFace B'man, tube power-amp emulations, and a wide range of effects designed to shape the tone and replicate the desired sound. Key Features and Specifications: \- Preamp: Based on an all original '74 Fender SilverFace B’man \- Tube Stage Output: Offers a choice of 4 different tube models (6L6, EL34, EL84, and KT88) in Push-Pull (PP) in AB class, or Single Ended (SE) in A class configurations \- EQ Section: Features three modes - GUITAR, BASS, or CUSTOM \- Reverb: Provides the option to choose the recording environment sound \- Torpedo Technology: Utilizes a unique technology based on an adaptation of convolution techniques to achieve realistic quality \- 3rd Party Impulse Responses: Capable of embedding impulse responses in .WAV or .AIFF formats \- Create Your Own IR's: Allows users to capture their own cabinet + microphone setup and embed its sound signature into the Torpedo CAB M+ \- Connectivity: Offers various input and output options including Amp/Instrument/Line input, Speaker Output, USB for Remote application, Headphones output, Auxiliary input, Ground lift switch, Balanced XLR DI output, and Balanced TRS jack output \- Dimensions and Weight: 4.8” x 4” x 2.4”, Weight: 0.99 lbs The Torpedo CAB M+ can be used in various setups, such as on a pedalboard, between the amp and the speaker cabinet as an amp DI, or after a load box for silent playing/recording of the amplifier at its sweet spot. It is important to note that the Torpedo CAB M+ is not a load box, and when connecting the speaker output of an amplifier into the amp input of the Torpedo CAB M+, a speaker cabinet must always be connected to the THRU output. The amplifier output impedance must always match the speaker cabinet impedance.

Torpedo C.A.B. M

The Torpedo C.A.B. M by Two Notes is a speaker cabinet simulator pedal designed to provide a comprehensive solution for guitarists and bassists. It offers a range of features and functionalities: 1\. Technology: The Torpedo C.A.B. M utilizes a unique technology based on an adaptation of convolution techniques to accurately reproduce the system as it was measured, including the microphone's position in space by using IR synthesis. 2\. Virtual Cabinets and Microphones: It comes with a library of 32 cabinets and 8 microphones, allowing users to choose one cabinet and two microphones, and fine-tune the position of each microphone in front of the cabinet. Additionally, users can upgrade and add more cabinets through the Two Notes Store. 3\. Tube Stage Output: The pedal offers an original tube-stage modeling that provides a choice of 4 different tube models (6L6, EL34, EL84, and KT88) in Push-Pull (PP) in AB class, or Single Ended (SE) in A class configurations. 4\. EQ Section: The Torpedo C.A.B. M features a simple but efficient EQ filter with three modes: GUITAR, BASS, or CUSTOM. 5\. Reverb: It includes a reverb feature that allows users to choose the recording environment sound. 6\. Impulse Responses (IRs): The pedal is capable of embedding third-party impulse responses in WAV or AIFF formats, and users can also create their own IRs using the free Torpedo BlendIR software. 7\. Connectivity: The pedal offers various connectivity options, including Amp/Instrument/Line input, Speaker Output, USB for Remote application, Headphones output, Auxiliary input, Ground lift switch, Balanced XLR DI output, and Balanced TRS jack output. 8\. Remote Control: Users can control the Torpedo C.A.B. M from a computer (PC or Mac) using the Torpedo Remote software via USB, allowing them to create, save, and load presets, as well as load new cabinets or IR files. 9\. Use Cases: The pedal can be used on a pedalboard, after a preamp, among usual stompboxes, or between the amp and the speaker cabinet as an amp DI. It can also be used as a super-DI for keyboards. 10\. Safety Instructions: The product comes with detailed safety instructions, including information about power adapter, safety use conditions, cleaning, maintenance, and disposal of waste equipment. M is not a load box, and when connecting the speaker output of an amplifier into the amp input of the pedal, a speaker cabinet must always be connected to the THRU output. The amplifier output impedance must always match the speaker cabinet impedance.

Torpedo C.A.B.

The Torpedo C.A.B. by Two Notes is a powerful pedal platform designed to provide a foundation for creating incredible tones without the need for amps or cabinets. It is a speaker cabinet simulator in a stompbox style, offering a range of features and functionalities for guitarists and bassists. The device is compliant with CE and FCC standards and offers a range of connectivity options including GTR/LINE input, amp/line output, headphones output, MIDI input, and USB. Key Features and Functionalities: \- Enhancer: Frequency and dynamic shaping, thickness and brilliance for low- end and high-end emphasis, body for shaping the mid-range, and guitar and bass modes. \- DynIR (Dynamic IR) technology for simulating guitar cab sims from various speaker models. \- Large library of 32 cabinets and 8 microphones, with the ability to add more cabinets through "La Boutique", an online virtual cabinet store. \- Unique technology based on an adaptation of convolution techniques for realistic sound reproduction. \- Tube stage output with a choice of 4 different tube models (6L6, EL34, EL84, and KT88) in Push-Pull (PP) in AB class, or Single Ended (SE) in A class configurations. \- EQ section with two modes for guitar or bass. \- Room reverb feature for simulating room sound during recording. \- Capability to embed third-party impulse responses (IRs) in WAV or AIFF formats and create custom IRs using the Torpedo BlendIR software. Use Cases: \- Replacing traditional miking setups for guitar and bass amplifiers in live performances and studio recordings. \- Providing a virtual alternative to traditional miking, allowing direct sound output to a PA or recorder. \- Use with guitar/bass preamplifiers, amplifiers, effect pedals, and other modeling products for silent playing and quality sound pick-up. The Torpedo C.A.B. offers a range of control options including programmable footswitches, MIDI input, and USB connectivity for remote control and preset management using the Torpedo Remote software. It also features three menus (PERFORM, EDIT, and SETUP) for navigating presets, editing parameters, and setting global parameters. The device is designed to offer ease of use, reliability, versatility, and perfect audio quality, making it a valuable tool for musicians seeking professional sound capture of their amplified instruments in various settings.

Le Clean

The Two Notes Le Clean is a dual-channel tube preamp pedal designed to deliver classic amp tones with modern features. It is part of the Le Preamp series, which includes Le Crunch, Le Lead, and Le Bass. The preamp operates at a True High Voltage Design running internally at 200 volts to preserve the interaction between the player and the guitar while working perfectly with other effect pedals. The A and B channels are independent, each with its own voicing and EQ section, offering flexibility in tone shaping. The exclusive Fusion modes, Cold Fusion and Hot Fusion, provide additional tonal options by blending the cleaner sound from Channel A with the more distorted sound from Channel B. The preamp features 2 channel footswitches for A and B channels, with the ability to activate the Fusion mode by simultaneously pressing both footswitches. It also supports MIDI control, allowing seamless integration into any pedalboard switching system. The preamp can be used in various configurations, such as a traditional preamplifier, connected to a power amplifier and cabinet, or in a direct setup for recording, playing on stage, or with headphones. The Le Clean comes with a 16 cabs license for Wall of Sound, a speaker and miking simulation plugin, providing access to 16 virtual cabinets for recording. The preamp is equipped with a Ruby 12AX7AC5 HG tube and features a variety of input and output options, including instrument input, Thru output, FX Loop Send output, MIDI input, power adapter connector, headphones output, speaker simulation, balanced DI output, and more. Technical Specifications: \- Tube: Ruby 12AX7AC5 HG \- Tone Control: A channel - Passive Bass/Treble tonestack, B channel - Passive Bass/Treble tonestack, Active Mid/Sweep control \- Input/Output: Instrument input, Thru output, FX Loop Send output, MIDI input, power adapter connector, headphones output, speaker simulation, balanced DI output \- Power: Mains power adaptor DC Jack 2.1mm, negative center, Input voltage: 12V DC, Power consumption: approx. 6W, Current draw: 500mA \- Dimensions & Weight: Width x depth x height: 124 x 189 x 50 (mm) - 4.88 x 7.44 x 1.97 (in), Weight: 750g - 1.65 lb

Le Crunch

Le Crunch by Two Notes is a versatile tube preamp pedal designed to deliver classic British stack amp tones. It features two independent channels, A and B, each with its own voicing and EQ section. Channel A offers a lower gain tube stage with a pre-gain EQ, while Channel B provides more gain and a powerful post-EQ with mid sweep. The pedal also includes exclusive Fusion modes: Cold Fusion, blending cleaner sound from A with a more distorted sound from B, and Hot Fusion, cascading A as a boost for B. The pedal offers high-quality electronic design, running internally at 200 volts to preserve the interaction between the player and the guitar while working seamlessly with other effect pedals. It also integrates analog speaker simulation specifically voiced for the Le Crunch model, affecting the DI output and the headphones output. Le Crunch can be used in various configurations, such as a traditional preamplifier connected to a power amplifier and cabinet, or as a boost, overdrive, or distortion pedal when placed before an amplifier. It can also function as an autonomous system, ready to be directly connected to a mixing board on stage or in the studio. The pedal features MIDI capabilities, allowing for seamless integration into any pedalboard switching system. The technical specifications of Le Crunch include: \- Tube: Ruby 12AX7AC5 HG \- Tone Control: A channel - Passive Bass/Treble tonestack, B channel - Passive Bass/Treble tonestack, Active Mid/Sweep control, Gain: -18 to +6 dB, Freq: 300Hz to 1.5kHz \- Input/Output: Input - Jack 6.35 mm unbalanced (TS, Tip/Sleeve), Impedance: 1 MOhms, Return - Jack 6.35mm unbalanced (TS), Max input level: 17 dBu, Impedance: 2.2 MOhms, Output - Jack 6.35 mm unbalanced (TS), Max output level: 11 dBu, Impedance: 300 Ohms, and more \- Power: Mains power adaptor DC Jack 2.1mm, negative center, Input voltage: 12V DC, Power consumption: approx. 6W, Current draw: 500mA \- Dimensions & Weight: Width x depth x height: 124 x 189 x 50 (mm) - 4.88 x 7.44 x 1.97 (in), Weight: 750g - 1.65 lb Additionally, Le Crunch comes with a 16 cabs license for Wall of Sound, a speaker and miking simulation plugin, providing access to 16 virtual cabinets for recording purposes.

Le Lead

The Le Lead by Two Notes is a dual-channel tube preamp pedal designed to deliver high-gain lead tones. It features two independent preamps that are footswitchable and can be blended together. The preamp operates internally at 200 volts to preserve the interaction between the player and the guitar while working with other effect pedals. Each channel has its own voicing and EQ section, with Channel A offering a lower gain tube stage and pre-gain EQ, while Channel B provides more gain and a powerful post-EQ with mid sweep. The exclusive Fusion modes, "Hot Fusion" and "Cold Fusion," offer cascading and parallel blending of the channels, respectively. The preamp also features 2 channel footswitches, A and B, with the ability to activate Fusion mode by simultaneously pressing both switches. Additionally, it can respond to MIDI commands for seamless integration into pedalboard switching systems. The Le Lead includes various inputs and outputs such as instrument input, thru output, FX loop send output, MIDI input, power adapter connector, headphones output, ground lift, balanced DI output, MIDI output, FX loop return input, and instrument output. It also incorporates a speaker simulation specifically voiced for the Le Lead model, based on the Torpedo simulator. The preamp can be connected to a mixing desk, power amplifier, speaker simulator, or digital audio interface for recording purposes. The product manual provides detailed information on the functionality, connections, and tips for using the Le Lead in various setups, including using multiple Le Lead preamps together and integrating with other effects pedals and MIDI devices.

Le Crunch Pedal

The Two Notes Le Crunch Pedal is a 2-channel British tones tube preamp pedal designed to replicate the classic British stack of amps that have defined Rock’n’Roll since the late 60’s. The pedal features two independent preamps that are footswitchable and can be blended together. The A channel offers a clean plexi sound, while the B channel provides high-gain tones suitable for rock and metal. The Le Crunch Pedal is a True High Voltage Design running internally at 200 volts to preserve the interaction between the guitar and the player while working seamlessly with other effect pedals. Each channel has its own voicing and EQ section, with Channel A featuring Bass and Treble controls, and Channel B offering Bass, Mid with Mid Sweep, and Treble controls. The exclusive Fusion modes open new tonal possibilities, and the pedal can be connected via MIDI to integrate seamlessly into any pedalboard switching system. The pedal also features an analog speaker simulation specifically voiced for the Le Preamp Model, affecting the DI output and the Headphones output. Technical Specifications: \- Tube: Ruby 12AX7AC5 HG \- Tone control: \- A channel: Passive Bass/Treble tonestack \- B channel: Passive Bass/Treble tonestack, Active Mid/Sweep control \- Input/Output: \- Input: Jack 6.35 mm unbalanced (TS), Impedance: 1 MOhms \- Return: Jack 6.35mm unbalanced (TS), Max input level: 17 dBu, Impedance: 2.2 MOhms \- Output: Jack 6.35 mm unbalanced (TS), Max output level: 11 dBu, Impedance: 300 Ohms \- Thru: Jack 6.35 mm unbalanced (TS) \- Send: Jack 6.35 mm unbalanced (TS), Max output level: 11 dBu, Impedance: 300 Ohms \- DI Output: XLR, balanced, Impedance: 600 Ohms, Max output level: 10 dBu \- Phones: Jack 3.5 mm stereo (TRS) \- Power: \- Mains power adaptor DC Jack 2.1mm, negative center \- Input voltage: 12V DC \- Power consumption: approx. 6W \- Current draw: 500mA \- Dimensions & Weight: \- Width x depth x height: 124 x 189 x 50 (mm) – 4.88 x 7.44 x 1.97 (in) \- Weight: 750g – 1.65 lb

Le Clean

The Two Notes Le Clean is a dual-channel tube preamp pedal designed to deliver classic amp tones with modern features. It is part of the Le Preamp series, which includes Le Crunch, Le Lead, and Le Bass. The preamp operates at a True High Voltage Design running internally at 200 volts to preserve the interaction between the player and the guitar while working perfectly with other effect pedals. The A and B channels are independent, each with its own voicing and EQ section, offering flexibility in tone shaping. The exclusive Fusion modes, Cold Fusion and Hot Fusion, provide additional tonal options by blending the cleaner sound from Channel A with the more distorted sound from Channel B. The preamp features 2 channel footswitches for A and B channels, with the ability to activate the Fusion mode by simultaneously pressing both footswitches. It also supports MIDI control, allowing seamless integration into any pedalboard switching system. The preamp can be used in various configurations, such as a traditional preamplifier, connected to a power amplifier and cabinet, or in a direct setup for recording, playing on stage, or with headphones. The Le Clean comes with a 16 cabs license for Wall of Sound, a speaker and miking simulation plugin, providing access to 16 virtual cabinets for recording. The preamp is equipped with a Ruby 12AX7AC5 HG tube and features a variety of input and output options, including instrument input, Thru output, FX Loop Send output, MIDI input, power adapter connector, headphones output, speaker simulation, balanced DI output, and more. Technical Specifications: \- Tube: Ruby 12AX7AC5 HG \- Tone Control: A channel - Passive Bass/Treble tonestack, B channel - Passive Bass/Treble tonestack, Active Mid/Sweep control \- Input/Output: Instrument input, Thru output, FX Loop Send output, MIDI input, power adapter connector, headphones output, speaker simulation, balanced DI output \- Power: Mains power adaptor DC Jack 2.1mm, negative center, Input voltage: 12V DC, Power consumption: approx. 6W, Current draw: 500mA \- Dimensions & Weight: Width x depth x height: 124 x 189 x 50 (mm) - 4.88 x 7.44 x 1.97 (in), Weight: 750g - 1.65 lb

Le Crunch

Le Crunch by Two Notes is a versatile tube preamp pedal designed to deliver classic British stack amp tones. It features two independent channels, A and B, each with its own voicing and EQ section. Channel A offers a lower gain tube stage with a pre-gain EQ, while Channel B provides more gain and a powerful post-EQ with mid sweep. The pedal also includes exclusive Fusion modes: Cold Fusion, blending cleaner sound from A with a more distorted sound from B, and Hot Fusion, cascading A as a boost for B. The pedal offers high-quality electronic design, running internally at 200 volts to preserve the interaction between the player and the guitar while working seamlessly with other effect pedals. It also integrates analog speaker simulation specifically voiced for the Le Crunch model, affecting the DI output and the headphones output. Le Crunch can be used in various configurations, such as a traditional preamplifier connected to a power amplifier and cabinet, or as a boost, overdrive, or distortion pedal when placed before an amplifier. It can also function as an autonomous system, ready to be directly connected to a mixing board on stage or in the studio. The pedal features MIDI capabilities, allowing for seamless integration into any pedalboard switching system. The technical specifications of Le Crunch include: \- Tube: Ruby 12AX7AC5 HG \- Tone Control: A channel - Passive Bass/Treble tonestack, B channel - Passive Bass/Treble tonestack, Active Mid/Sweep control, Gain: -18 to +6 dB, Freq: 300Hz to 1.5kHz \- Input/Output: Input - Jack 6.35 mm unbalanced (TS, Tip/Sleeve), Impedance: 1 MOhms, Return - Jack 6.35mm unbalanced (TS), Max input level: 17 dBu, Impedance: 2.2 MOhms, Output - Jack 6.35 mm unbalanced (TS), Max output level: 11 dBu, Impedance: 300 Ohms, and more \- Power: Mains power adaptor DC Jack 2.1mm, negative center, Input voltage: 12V DC, Power consumption: approx. 6W, Current draw: 500mA \- Dimensions & Weight: Width x depth x height: 124 x 189 x 50 (mm) - 4.88 x 7.44 x 1.97 (in), Weight: 750g - 1.65 lb Additionally, Le Crunch comes with a 16 cabs license for Wall of Sound, a speaker and miking simulation plugin, providing access to 16 virtual cabinets for recording purposes.

Le Lead

The Le Lead by Two Notes is a dual-channel tube preamp pedal designed to deliver high-gain lead tones. It features two independent preamps that are footswitchable and can be blended together. The preamp operates internally at 200 volts to preserve the interaction between the player and the guitar while working with other effect pedals. Each channel has its own voicing and EQ section, with Channel A offering a lower gain tube stage and pre-gain EQ, while Channel B provides more gain and a powerful post-EQ with mid sweep. The exclusive Fusion modes, "Hot Fusion" and "Cold Fusion," offer cascading and parallel blending of the channels, respectively. The preamp also features 2 channel footswitches, A and B, with the ability to activate Fusion mode by simultaneously pressing both switches. Additionally, it can respond to MIDI commands for seamless integration into pedalboard switching systems. The Le Lead includes various inputs and outputs such as instrument input, thru output, FX loop send output, MIDI input, power adapter connector, headphones output, ground lift, balanced DI output, MIDI output, FX loop return input, and instrument output. It also incorporates a speaker simulation specifically voiced for the Le Lead model, based on the Torpedo simulator. The preamp can be connected to a mixing desk, power amplifier, speaker simulator, or digital audio interface for recording purposes. The product manual provides detailed information on the functionality, connections, and tips for using the Le Lead in various setups, including using multiple Le Lead preamps together and integrating with other effects pedals and MIDI devices.

Le Bass

The Le Bass by Two Notes is a versatile tube preamp pedal designed for bass players. It features a True High Voltage Design running internally at 200 volts to preserve the interaction between the player and the instrument. The preamp offers two independent channels, each with its own voicing and EQ section. Channel A provides a lower gain tube stage with a pre-gain EQ, while Channel B offers more gain and a powerful post-EQ with mid sweep. The exclusive Fusion modes, "Hot Fusion" and "Cold Fusion," open up new tonal possibilities by cascading or blending the two channels. The pedal includes two channel footswitches for A and B, allowing seamless switching between channels and activating the Fusion mode. It also supports MIDI connectivity for remote control and seamless integration into pedalboard switching systems. The Le Bass features an FX loop, speaker simulation, balanced DI output, ground lift, and a headphones output for silent practice. The analog speaker simulation is specifically voiced for the Le Bass model and is based on the Torpedo simulator. The pedal can be used in various configurations, such as a boost or distortion pedal for an amplifier, as a preamplifier connected to a power amplifier and cabinets, or in a direct setup for recording. It is designed to work together with other Two Notes preamps, allowing for multi-channel configurations and complex pedalboard setups. The Le Bass operates on a 12V DC input, with a power consumption of approximately 6W and a current draw of 500mA. It has dimensions of 4.88" x 7.44" x 1.97".

Le Crunch Pedal

The Two Notes Le Crunch Pedal is a 2-channel British tones tube preamp pedal designed to replicate the classic British stack of amps that have defined Rock’n’Roll since the late 60’s. The pedal features two independent preamps that are footswitchable and can be blended together. The A channel offers a clean plexi sound, while the B channel provides high-gain tones suitable for rock and metal. The Le Crunch Pedal is a True High Voltage Design running internally at 200 volts to preserve the interaction between the guitar and the player while working seamlessly with other effect pedals. Each channel has its own voicing and EQ section, with Channel A featuring Bass and Treble controls, and Channel B offering Bass, Mid with Mid Sweep, and Treble controls. The exclusive Fusion modes open new tonal possibilities, and the pedal can be connected via MIDI to integrate seamlessly into any pedalboard switching system. The pedal also features an analog speaker simulation specifically voiced for the Le Preamp Model, affecting the DI output and the Headphones output. Technical Specifications: \- Tube: Ruby 12AX7AC5 HG \- Tone control: \- A channel: Passive Bass/Treble tonestack \- B channel: Passive Bass/Treble tonestack, Active Mid/Sweep control \- Input/Output: \- Input: Jack 6.35 mm unbalanced (TS), Impedance: 1 MOhms \- Return: Jack 6.35mm unbalanced (TS), Max input level: 17 dBu, Impedance: 2.2 MOhms \- Output: Jack 6.35 mm unbalanced (TS), Max output level: 11 dBu, Impedance: 300 Ohms \- Thru: Jack 6.35 mm unbalanced (TS) \- Send: Jack 6.35 mm unbalanced (TS), Max output level: 11 dBu, Impedance: 300 Ohms \- DI Output: XLR, balanced, Impedance: 600 Ohms, Max output level: 10 dBu \- Phones: Jack 3.5 mm stereo (TRS) \- Power: \- Mains power adaptor DC Jack 2.1mm, negative center \- Input voltage: 12V DC \- Power consumption: approx. 6W \- Current draw: 500mA \- Dimensions & Weight: \- Width x depth x height: 124 x 189 x 50 (mm) – 4.88 x 7.44 x 1.97 (in) \- Weight: 750g – 1.65 lb