FV-10 Fuzz Elements, Void

The Maxon FV-10 Fuzz Elements Void is a unique guitar effect pedal designed to emulate the vintage Ampeg Scrambler. It features a fuzz engine that produces frequency- and dynamics-dependent fuzz/octavia effects, with an overtone knob to control the amount of even-order harmonics. The blend knob allows for balancing dry and affected signals, while the level knob provides output level control, functioning as a booster. The pedal is known for creating spongy, synthetic guitar tones that can produce octave-up or octave-down effects, depending on the control settings and playing position on the neck. It is capable of generating unique sounds from both single notes and chords. When combined with other distortion devices and adjusted using the blend knob, the FV-10 can produce a new range of fuzz/distortion effects as its circuit interacts with the harmonic content of the other device. The FV-10 features mechanical true bypass switching to ensure that the chaotic effects are only engaged when desired. It also includes an effect LED indicator and operates on a 9-volt DC battery or external adapter. Technical Specifications: \- Input Impedance: 150k ohms \- Output Impedance: 10k ohms \- Maximum Gain: 28dB (1kHz) \- Input Noise: -106dB or less (Input shorted, IHF-A weighted) \- Controls: Overtone, Level, Blend \- Switch: Bypass/Effect \- Indicator: Bypass/Effect LED \- Power Supply: 9V DC battery or Maxon AC adaptor \- Power Consumption: 9mA/9VDC \- Battery Life: 9VDC manganese battery 57 hours at 25°C (FUJITSU 6F22), 9VDC alkaline battery 86 hours at 25°C (TOSHIBA 6LF22) \- Dimensions: 70(W)×113(D)×56(H)mm (with protrusion) \- Weight: Approx. 320g (including battery)

PH-350 Rotary Phaser

PAC9

The Maxon PAC-9 Pure Analog Chorus is a high-quality analog chorus pedal with specific technical specifications and features. Here are the details: \- Made in Japan \- Analog chorus with lush, organic tone \- Wide-range Speed control for Rotary speaker effects \- Special noise filtering circuit \- Bright and Pure switches for additional tonal options \- Stereo outputs \- Works in FX loop or front-end of amp \- True Bypass Switching \- Professional-grade IC’s typically reserved for High-End Audio applications \- Extended LFO range for classic rotary speaker sounds \- Pure switch boosts the delayed signal by 4 dB to create a more dramatic, tremolo-like chorus effect \- Bright switch subtly scoops lows on the delayed signal for a more traditional chorusing sound \- Standard and inverted (90 degrees out of phase) outputs allow for mono, stereo, or inverted mono signal routing options \- Internal voltage-doubling circuitry provides maximum headroom to eliminate input distortion \- Higher operating voltage allows it to be used in an FX loop to place the chorus effect post-gain Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Output Level: +9 dB (400 Hz) \- Delay Time: 4.6 msec – 7.68 msec \- Speed Frequency: .33 Hz – 8 Hz \- Controls: SPEED, WIDTH, PURE, BRIGHT \- Switch: BYPASS/EFFECT (mechanical TBS) \- In/Out: INPUT, OUTPUT, INVERSE OUTPUT \- Residual Noise: -95 dB (IHF-A) \- Indicator: BYPASS/EFFECT LED \- Internal Circuit Voltage: 9 VDC (DC-DC Converter) \- Current Consumption: 21 mA / 9 VDC \- Power Supply: 6F22 9V battery or Maxon AC Adaptor \- Battery Life: Manganese battery 8.5 hours @ 25deg C, Alkaline battery 20 hours @ 25deg C \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) / 2.9” (W) x 4.9” (D) x 2.13” (H) \- Weight: 580 g (including battery) / 20.46 oz. \- Option: Maxon AC Adaptor (AC210N or AC2009)

BC-01 Bi-Mode Chorus

CS550

The Maxon CS550 Stereo Chorus pedal is a classic analog chorus circuit based on the Boss CE-1, offering a wide range of standard chorus effects and unique "spatial" effects unavailable with other chorus units. The pedal features a Panasonic MN3207 Bucket Brigade IC and Delay Time and Effect Blend controls. Its design is based around the Panasonic MN3207, providing a bold and resonant chorus effect without sounding harsh. The CS550's custom-tuned oscillator circuit allows for authentic rotary speaker simulation and lush vibrato. The Delay Time control can venture into flanger territory, adding a resonant, hollow quality to the effect that's great for solos. The pedal also features a rear-mounted Blend control to adjust the level of the chorus effect against the dry signal. Additionally, the CS550 can create spatial effects that add dimension to the guitar tone without the traditional chorus wobble. The CS550 offers stereo outputs for mono, stereo, or inverted mono signal routing, and it is about as close as you're going to get to the legendary Boss CE-1 chorus/vibrato sound. The pedal also features Mechanical True Bypass switching on both outputs via a Fujisoku 4PDT switch. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Residual Noise: -100 dB (Level, VR Min) \- Maximum Output Level: +5 dB \- Delay Time: 0.8 mSec - 6.3 mSec \- LFO Speed: 0.4 Hz - 8 Hz \- Controls: Delay Time, Depth, Speed, Mix-Level \- Power Supply: Special AC adaptor \- Power Voltage: DC10 V (AC-adaptor) \- Current Consumption: 21 mA (10 VDC) \- Dimensions: 117 mm (W) x 150 mm (D) x 60 mm (H) \- Weight: 500 g

CP101

The Maxon CP101 Compressor pedal provides clean, smooth compression with ultra-low noise and incredible transparency. Its optical circuit has a slow, smooth reaction time that allows the initial note attack to pass through without being compressed, creating a more natural picking feel. The CP101's low compression ratio prevents changes to a note’s attack characteristics, yielding a more natural picking response. It can be used to increase an instrument’s sustain or to limit signal peaks for a smooth, even output. Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Sustain, Level \- Switch: Normal/Effect \- Max Input Level: 2 dBu \- Max Output Level: 0 dBu \- Noise (IHF-A): -110 dBu \- Max Compression: 42 dB \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 11 mA (9V) / 12 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center – / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 270 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User’s Manual x 1 The Maxon CP101 Compressor is designed for players who need a compressor that doesn’t alter their tone, ruin their pick attack, or introduce excessive noise. It offers transparent compression and a natural picking response, making it suitable for a wide range of musical styles and applications.

CP-9 Pro+ Compressor/Limiter

The Maxon CP-9 Pro+ Compressor/Limiter is a studio-grade pedal featuring a DBX Compression circuit with a variable 1:1 to ∞:1 compression ratio and up to +30 dB maximum gain boost. It operates at 18 volts for increased headroom and full-frequency response, and it includes a reduction status LED for visual feedback. The CP-9 Pro+ is designed to provide transparent, low-noise compression with a smooth, balanced dynamic response, allowing the instrument's natural tone to shine through. It can be used with any instrument and for various applications, such as sending into an amp's front end, placing in a loop, or using as an outboard processor for home recordings. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Output Level: +18 dBu (1 KHz) \- Controls: Threshold (0 dBu to -40 dBu), Ratio (1:1 to ? :1), Gain (0 dB to +30 dB) \- Distortion Ratio: 0.01% (1 kHz) at 0 dB output \- Residual Noise: 95 dBu (input shorted, IHF-A weighted) \- Internal Circuit Voltage: Stabilized +/-9V DC-DC converter \- Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 25 mA (9 V) / 23 mA (10 V) at 18 volts \- Battery Life: Approximately 5.1 hours (Panasonic NEO battery 6F22NB) or 12.4 hours (Panasonic Alkaline battery 6LF61G) \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) \- Weight: 580 g The CP-9 Pro+ features mechanical true bypass switching using a Fujisoku 4PDT switch, ensuring quiet, transparent operation when bypassed. It also includes a warranty card, user's manual, and a 9V Manganese dry cell battery.

RCP660 Real Compressor

The Maxon RCP660 Real Compressor is a tube-based compressor pedal designed to provide natural compression suitable for both guitar and bass guitar. Here are the technical specifications and features: \- Input Impedance: 500K ohm \- Output Impedance: Less than 10k Ohm \- Equivalent Input Noise: Less than -105dB (input shorted, IHF-A weighted) \- Maximum Output Level: +10dB (typical) \- Maximum Gain: 47dB / 34dB (boost on / off) with all knobs at their maximum \- Compression Ratio: 3:1 (approximate) \- Attack Time: 1 to 12mSec. (at input -10dB, 1KHz) \- Tube: Selected dual triode tube \- Power Consumption: 160 mA at 10VDC / 160 mA at 9VDC \- Dimensions: 4.3" (W) x 6.3" (D) x 2.8" (H) or 110 mm (W) x 160 mm (D) x 72 mm (H) \- Weight (with battery): 21 oz (600 grams) \- Accessories: AC210 Adapter (for 120VAC), User's Manual, Warranty Card \- Power Supply: Maxon AC210N for 120VAC (included) Features and Controls: \- Sensitivity: Controls input sensitivity to match the output of the guitar's pickup \- Attack: Controls pick attack intensity \- Sustain: Controls the duration of a picked signal at a constant level \- Master: Controls effected output volume \- Footswitchable Boost function for quick changes between solos and rhythms \- LED indicators for effect mode and boost on/off The RCP660 Real Compressor is known for its ability to add warmth, detail, and a three-dimensional quality to recordings, making it suitable for both live use and recording applications. It offers an array of compressed tones and a footswitchable boost function, making it versatile for various musical applications.

DD Digital Delay

CP-9 Pro+

The Maxon CP-9 Pro+ Compressor/Limiter is a versatile pedal with studio-grade DBX Compression circuitry, offering a range of features and technical specifications. Here are the details: Features: \- Studio-grade DBX Compression circuit in a pedal \- Variable 1:1 to ∞:1 compression Ratio \- +30 dB maximum Gain boost (usable as a clean booster) \- 18-volt operation for increased headroom and full-frequency response \- Reduction status LED \- True Bypass Switching Functionality: \- Provides smooth, transparent compression with low noise floor \- Offers up to +30 dB of clean Gain, usable as a clean booster or volume attenuator \- Can be used with any instrument and for various applications, such as sending into an amp's front end, placing in a loop, or using as an outboard processor for home recordings Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Output Level: +18 dBu (1 KHz) \- Controls: Threshold (0 dBu to -40 dBu), Ratio (1:1 to ? :1), Gain (0 dB to +30 dB) \- Distortion Ratio: 0.01% (1 kHz) at 0 dB output \- Residual Noise: 95 dBu (input shorted, IHF-A weighted) \- Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 25 mA (9 V) / 23 mA (10 V) at 18 volts \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) \- Weight: 580 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Warranty Card x 1, User's Manual x 1 The CP-9 Pro+ is designed to provide professional-grade compression in a portable stompbox format, offering a wide range of applications and precise control over compression settings.

RTC600 Real Tube Compressor/Limiter

The Maxon RTC600 Real Tube Compressor/Limiter is a studio-grade compressor with a real vacuum tube, offering warm yet bold compression/limiter sound. It features low noise and wide dynamic range with a precise RMS level detecting circuit and high-performance VCA (voltage controlled amplifier). The RTC600 provides studio-level settings with three controls (THRESHOLD, RATIO, GAIN) and two envelope controls (ATTACK, RELEASE). Key technical specifications include: \- Input Impedance: 500k ohms \- Output Impedance: 10k ohms \- Maximum Output Level: +20dBu (at 1kHz) \- Residual Noise: -94dBu or less (Input shorted, IHF-A weighted) \- T.H.D.+N: 0.02% or less (at 1kHz, -10dBu output) \- Power Supply: Maxon AC adaptor \- Power Consumption: 240mA/9VDC \- Internal Circuit Voltage: ±12.5V (DC to DC Converter) \- Dimensions: 121(W)×152(D)×60(H)mm (with protrusion) \- Weight: Approx. 580g (without AC adaptor) The RTC600 offers variable threshold level (0dBu to -40dBu) for optimal compression settings, a variable compression ratio from 1:1 to infinity:1, and variable output gain (0dB to 30dB). It also features "Brick Wall" limiter and "Soft Knee" compression effects, as well as true mechanical bypass switching using a 4PDT switch. The pedal is designed with a high-headroom and full-range frequency response, allowing it to be used with any musical instrument. Additionally, it includes a tube heater inrush current control circuit to extend tube life and is FCC Part 15 compliant and RoHS compliant. The RTC600 is suitable for a variety of applications, including being sent into an amp's front end, placed in an effects loop, or used as an outboard processor for home recordings. It is a compact stompbox that provides studio- quality compression and is suitable for professional use.

CP-101 Compressor

The Maxon CP-101 Compressor is a high-quality guitar effect pedal designed to provide clean, smooth compression with ultra-low noise and incredible transparency. Its optical circuit features a hand-selected photocoupler, ensuring a subtle and transparent compression that does not alter the pick attack characteristics. The CP-101's low compression ratio prevents changes to a note's attack, yielding a more natural picking response. Key Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Controls: Sustain, Level \- Max Input Level: 2 dBu \- Max Output Level: 0 dBu \- Max Compression: 42 dB \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 11 mA (9V) / 12 mA (10 V) \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 270 g The CP-101's optical circuit ensures an ultra-low noise floor, making it suitable for use even after a distortion pedal while retaining near-silent operation. It features buffered, JFET bypass switching with a low impedance output, allowing it to drive long cable lengths or other effect units without signal loss. The pedal is ideal for musicians who require a compressor that doesn't compromise their tone, offering natural picking response, transparent effect, and low-noise operation. It can be used to increase an instrument's sustain or to limit signal peaks for a smooth, even output. Accessories included with the CP-101 Compressor: \- 9V Manganese dry cell battery (S-006P) x 1 \- Non-skid pad: x 1 \- Warranty Card: x 1 \- User's Manual: x 1 Overall, the Maxon CP-101 Compressor is a versatile and reliable pedal suitable for a wide range of musical applications, providing musicians with enhanced control over their instrument's dynamics and tonal characteristics.

AD-80 Analog Delay

The Maxon AD-80 Analog Delay is a highly sought-after single-pedal analog delay known for its high-quality vintage sound. It utilizes the MN3005 BBD (Bucket Brigade Device) and MN3101 Clockdriver, delivering exceptional analog delay performance. The pedal runs on 18 Volt DC and is made in Japan. Key Features: \- Delay Time: Adjustable from 10-300 milliseconds \- Repeat: Controls the number of echoes \- Blend: Manages the level balance of the delay signal \- Stereo Output: Allows for running the unit in stereo, with one signal completely dry and the other delay-only \- Construction: Strong die-cast housing with a standard SPDT footswitch that operates quietly \- Power: Operates on 18 Volt DC \- Warranty: Backed by a limited 3-year warranty on all non-moving parts such as transistors, while potentiometers and jacks are covered by a 1-year warranty Design: The AD-80 Analog Delay is housed in a compact unit, approximately the same size as a typical MXR effect pedal. It features individual quarter-inch input and output jacks, as well as an AC adapter jack for power. Sound Quality: The AD-80 is known for its warm, natural delay sound, making it suitable for various delay applications for guitar, including lead or rhythm doubling sounds, rockabilly slap backs, and longer delays with extended repeats. The analog design provides a warm characteristic with a realistic decay that progressively loses fidelity, resulting in a warmer tone. Overall: The Maxon AD-80 Analog Delay is ideal for tone connoisseurs and purists seeking a true warm analog delay effect with sonic superiority. It is designed for those who prioritize sound quality over programmable features and bells and whistles.

AD-999

The Maxon AD-999 is a vintage series analog delay pedal designed to deliver rich, warm, and organic delay tones. It features eight custom Maxon MC4107D Bucket Brigade ICs, providing a delay time of 40 milliseconds to 900 milliseconds. The pedal's delay repeats exhibit a slightly overdriven tonality, adding depth to clean sounds and complementing dirty tones. The AD-999 also features a slight EQ spike at around 1.5 kHz to prevent the repeats from becoming muddy. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Residual Noise: -95 dB (input shorted, IHF-A weighted) \- Control: Delay Time, Repeat, Delay Level \- Switch: Normal/Effect (4PDT mechanical true bypass) \- I/O: Input, Output (Mix in mono, Wet only in stereo), Dry Output \- Current Consumption: 46 mA at 9VDC / 48 mA at 10VDC \- Dimensions: 117 (W) x 150 (D) x 60 (H) mm \- Weight: 600 Grams The AD-999 also features Mechanical True Bypass switching on both outputs via a Fujisoku 4PDT switch, ensuring high-quality signal routing. The pedal's delay tone is described as pure analog heaven, reacting dynamically to the player's performance. The AD-999's design incorporates a high impedance input buffer, Compander stage, clock drivers, and a mixer/amplifier to blend the clean and delayed signals. The pedal is capable of self-oscillation effects and is equipped with stereo (wet/dry) outputs.

AD-9

The Maxon AD-9 Pro is a highly sought-after analog delay pedal known for its exceptional sound quality and innovative features. Here are the technical specifications and details for the AD-9 Pro: \- 100% Analog Delay with 450 mS delay time \- Gorgeous, warm, organic delay tone \- Special filtering on repeats to reduce distortion \- Multi-Tap switch for “beat-split” effects \- Capable of Self-oscillation effects \- Stereo (wet/dry) outputs \- Works in FX loop or front-end of amp \- True Bypass Switching \- Features 4 Maxon MC4107D bucket brigade IC’s \- Incorporates the world’s first RMS level sensor and companding noise reduction system \- Improved headroom for accepting any input signal \- Switchable multi-head tape echo simulator function \- Mechanical True Bypass switching on both wet and dry outputs \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Residual Noise: -100 dB or less (IHF-A) \- Delay Time: 20 mSec to 450 mSec \- Equivalent Input Noise: 116 dB or less (IHF-A) \- Controls: Delay Time, Feedback, Delay Level \- Operating Voltage: 9V \- Power Consumption: DELAY TIME MIN 39mA/DC.9V 38mA/DC.10V \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) \- Weight: 80 grams (including battery) \- Battery: 9V battery (6LR61 or 6F22) x 1 or Maxon AC adaptor \- Battery Life: Manganese dry battery more than 2 hours 25deg C / 77deg F (Panasonic 6F22NB) Alkaline dry battery more than 8 hours 25deg C / 77deg F (Panasonic 6LR61G) The AD-9 Pro sets a new standard of analog innovation and audio purity, making it a top choice for musicians seeking rich tone and versatile delay effects.

AD202 Multi Mode Analog Delay

DD Digital Delay

AD10

The Maxon AD10 Analog Delay is a 100% analog delay pedal with a delay time of up to 600 milliseconds. It features a warm, organic delay tone with special filtering on repeats to reduce distortion. The pedal is capable of self- oscillation effects and can work in the FX loop or front-end of an amp. The minimalist control interface makes it easy to dial in a variety of usable delay effects, including double-tracking, faux reverb, tight rhythm slapbacks, and longer delays for solos. The AD10 retains its distinctive sound even when stacked with overdrives and distortions. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Controls: DELAY, REPEAT, BLEND \- Switch: Bypass/Effect \- Indicator: Bypass/Effect LED \- Equivalent Input Noise: -95dBu or less (Input shorted, IHF-A weighted) \- Delay Time: 35mSec to 600mSec \- Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor \- Power Consumption: 30mA max. / 9VDC \- Battery Life: \- 9VDC manganese battery: 16.5 hours at 25°C (FUJITSU 6F22) \- 9VDC alkaline battery: 33.5 hours at 25°C (TOSHIBA 6LF22) \- Dimensions (whole): 70(W) x 113(D) x 56(H)mm (with protrusion) \- Weight: Approx. 330g (including battery) \- Accessory: 6F22 9V battery x 1, operating manual

AD-9 Pro Analog Delay

The Maxon AD-9 Pro Analog Delay pedal is designed to deliver 450 milliseconds of fat, warm analog delay tone. It features 4 custom-made Maxon MC4107D Bucket Brigade IC's, providing a transparent analog delay sound. The pedal also includes a switchable multi-head tape echo simulator function, offering various delay effects such as "Ping Pong" repeats and ambient effects. The AD-9 Pro utilizes a string of low gain, low voltage op amps to boost the signal and shape the sound without adding distortion. The signal then passes to a precision low voltage, low noise Compander IC designed to boost the signal while reducing noise. The delay circuit includes 4 Maxon MC4107D BBD delay IC’s controlled by two clock driver IC’s, running at a low clock rate to achieve maximum delay time and deliver a warm delay sound. The pedal features Mechanical True Bypass switching on both wet and dry outputs via a Fujisoku 4PDT switch, ensuring pure, unaltered tone when bypassed. It operates at an input impedance of 500K Ohms, output impedance of 10K Ohms, and offers a delay time of 20 mSec to 450 mSec. The AD-9 Pro is powered by a 9V battery or Maxon AC adaptor, with power consumption ranging from 38mA to 39mA. With its true bypass, crystal clear delay, adjustable repeats, zero clock noise, and stereo outputs, the Maxon AD-9 Pro Analog Delay pedal is suitable for a wide range of musical applications, from studio recording to live performances.

Overdrive Extreme (OD808X)

The Maxon Overdrive Extreme (OD808X) is a modified version of the classic OD808 Overdrive pedal, designed to offer extended frequency response for improved note definition and clarity. It features increased output (+5 dB over OD808) for extra volume boost and harder clipping for a more aggressive, amp- like distortion. The pedal is equipped with buffered bypass switching and shares the same basic circuit architecture as the OD808, with altered component values to achieve the ultimate overdrive tone. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Maximum Gain: 40dB (2 kHz) \- Input Noise: -110dB or less (Input shorted, IHF-A weighted) \- Controls: DRIVE, TONE, LEVEL \- Switch: BYPASS/EFFECT (Buffered Electronic Bypass) \- Indicator: BYPASS/EFFECT LED \- Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor \- Power Consumption: 7.2mA max. / 9VDC \- Battery Life: 9VDC manganese battery 78 hours 25 deg C (FUJITSU 6F22), 9VDC alkaline battery 114 hours 25 deg C (TOSHIBA 6LF22) \- Dimensions: 70(W) x 113(D) x 56(H) mm \- Weight: Approx. 300g (incl. battery) \- Accessory: 6F22 9V battery x 1, operating manual The OD808X is designed to create a versatile, amp-like overdrive with excellent note clarity that won’t get lost in a mix. It offers a wider frequency response than a stock OD808, with an extended hi-frequency tonal range that provides additional clarity without becoming harsh. The pedal is suitable for use in various musical applications, offering a powerful and dynamic overdrive effect.

DS830 Distortion Master

The Maxon DS830 Distortion Master is a high-gain distortion pedal designed to deliver an amp-like character, making it suitable for classic rock guitar tones reminiscent of Marshall JCM800/900. Despite its modest array of controls, the DS830 is highly flexible, capable of generating insane amounts of gain while retaining remarkable evenness and transparency. It is also capable of producing lightly overdriven blues tones and semi-clean solo boosts at lower gain settings. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms or less \- Output Jack: 1/4 inch standard phone jack \- Equivalent Input Noise: -114 dB (VR Max) \- Residual Noise: -110 dB (Level, VR Min) \- Maximum Gain: +59 dB (VR Max) (At 1 KHz) \- Controls: Gain, Bass, Treble, Level \- Switch: Normal/Effect \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 8 mA (9 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (whole): 117 mm (W) x 150 mm (D) x 60 mm (H) \- Weight: 500 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Maxon AC210N Adaptor: (9VDC/200mA), Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The DS830 features a dual-stage clipping design in its gain section, combining the classic “808” clipping with a pair of diodes to ground, resulting in a "chewy" pedal voice. The pedal also includes complex tone controls that act as an active two-band filter, changing the gain of the treble and bass frequencies going into the Op Amp. The Bass and Treble controls are highly interactive and complementary, providing a wide range of tone-shaping possibilities. The DS830 features buffered, Mechanical bypass switching with a low impedance output, allowing it to drive long cable lengths or other effect units without signal loss.

OD808X Overdrive Extreme

The Maxon OD808X Overdrive Extreme is a modified version of the classic OD808 Overdrive pedal. It offers an extended frequency response for improved note definition and clarity, as well as increased output (+5 dB over OD808) for extra volume boost. The pedal features a harder clipping pattern than the standard model, creating a searing, full-bodied drive tone that helps chords ring and notes sing. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Maximum Gain: 40dB (2 kHz) \- Input Noise: -110dB or less (Input shorted, IHF-A weighted) \- Controls: DRIVE, TONE, LEVEL \- Switch: BYPASS/EFFECT (Buffered Electronic Bypass) \- Indicator: BYPASS/EFFECT LED \- Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor \- Power Consumption: 7.2mA max. / 9VDC \- Battery Life: \- 9VDC manganese battery: 78 hours at 25°C (FUJITSU 6F22) \- 9VDC alkaline battery: 114 hours at 25°C (TOSHIBA 6LF22) \- Dimensions: 70(W) x 113(D) x 56(H) mm \- Weight: Approx. 300g (including battery) \- Accessory: 6F22 9V battery x 1, operating manual The OD808X features a low-impedance buffered bypass, allowing it to drive long cable lengths or other effect units without loss of signal. It is designed to provide a versatile, amp-like overdrive with excellent note clarity that won’t get lost in a mix.

OD-02 Overdrive

SM-9 Pro+ Super Metal

It offers a flexible saturation circuit capable of producing a wide range of high-gain guitar tones, from classic NWOBHM crunch to modern drop-tuned metal sounds. The pedal features Gain, Level, Scoop, and Edge controls, allowing users to sculpt brutal, beefy guitar tones while retaining note clarity and definition. The Scoop control is a mid-band elimination filter with a range from 200 Hz – 2 KHz, while the Edge control is a Hi-cut shelving filter continuously variable between 2-15 kHz. These controls are highly interactive and work like a parametric equalizer, enabling users to find the perfect mix of brutality and clarity. The Gain control adjusts the degree of saturation the pedal provides and simultaneously boosts the upper midrange band by up to 20 dB at 1 kHz. The pedal also offers switchable 9- or 18-volt operation, providing extended headroom, frequency range, and dynamic response. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 52.5dB (4 kHz) \- Equivalent Input Noise: -60dB or less (IHF-A) \- Control: GAIN, SCOOP, LEVEL, EDGE \- Switch: Bypass/Effect, Voltage Switch (9V/18V) \- Indicator: Bypass/Effect LED, 9V LED, 18V LED \- Internal Circuit Voltage: 9VDC / 18VDC (DC / DC Converter) \- Power Consumption: 12mA/9VDC, 42mA/18VDC \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 600g (including battery, excluding AC adaptor) \- Power Supply: 6F22 / 6LR6 9V battery x 1 or Maxon AC adaptor \- Battery life: \- 9VDC manganese battery: 27 hours @ 25 degrees C \- 9VDC alkaline battery: 50 hours @ 25 degrees C \- 18VDC manganese battery: 1.3 hours @ 25 degrees C \- 18VDC alkaline battery: 6 hours @ 25 degrees C The SM-9 Pro+ features Mechanical True Bypass switching via a Fujisoku 4PDT switch and requires a high inrush current of approximately 2000 mA upon startup. It is recommended to power the pedal with a high current power jack or leave a battery in the pedal if using a power brick with lower current capacity. The Maxon SM-9 Pro+ Super Metal is a versatile tool for achieving high-gain amp stack tones in a compact pedal format, making it suitable for both professional metal guitarists and enthusiasts seeking powerful metal distortion effects.

D&S II

The Maxon D&S; II Distortion Sustainer pedal is designed with a dual op-amp configuration similar to the OD808, providing increased low-end, output, and gain. The pedal offers complete control over the distortion effect, ranging from subtle crunch to intense saturation, through its Distortion, Tone, and Balance knobs. Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Distortion, Tone, Balance \- Switch: Normal/Effect \- Noise (IHF-A): -110 dBu \- Max Amplitude: 40 dBu \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 6 mA (9V) / 7 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 260 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1

PT999

The Maxon PT999 Phase Tone pedal is a compact and versatile phaser unit designed for guitar and bass effects. It offers a range of authentic 70's era phasing effects in a current production unit. The PT999 features a minimalist circuit with a single knob and switch, allowing for a wide variety of expressive phasing nuances. The circuit used in the PT999 is unchanged since its introduction in 1974, providing a timeless tone. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Rate \- Switch: Normal/Effect \- Max Input Level: 0 dBu \- Noise (IHF-A): -80 dBu \- Speed Frequency: 0.2 Hz ­ 14 Hz \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 12 mA (9V) / 14 mA (10 V) \- AC Adaptor AC210N (optional) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 270 g The PT999's four-stage phasing circuit offers 720 degrees of phasing sweep variable from 0.2 to 14 Hz. The FET's (Toshiba #2SK246) are carefully sorted and matched by hand to produce a smooth phasing sweep with low noise. The pedal runs negative feedback of the signal to each phase-shifting FET for less distortion. Internal trimmers adjust center frequency and width of the phasing sweep, calibrated prior to market. The PT999 Phase Tone pedal is designed to provide classic phase shifting effects without compromising the guitar's signature tone, making it a valuable addition to any musician's effects arsenal.

ROD881 Real Overdrive

The Maxon ROD881 Real Overdrive is a versatile pedal designed to provide a wide range of overdriven tube sounds and distortion tones. It is powered by a hand-selected 12AX7WXT preamp tube, which enhances the overdriven tube sounds and adds a switchable Distortion mode for searing, super-saturated guitar tones. The ROD881 features a switchable Distortion mode that adds a secondary, cascaded gain stage into the signal path for extreme tube punishment. This mode greatly increases the pedal's versatility, allowing it to function in various roles from semi-clean booster to ultra-high gain preamp. Additionally, the pedal includes a Footswitchable Boost mode, effectively adding another channel to the amplifier for quick changes between solos and rhythms. The control panel of the ROD881 allows for precise command of the output level and amount of Drive, with controls for Gain, Master Volume, Bass, Treble, and Mid Boost. These controls offer a wide array of tonal options, from classic 808 tones to extremely beefy low-end chunk. To maintain clean and noise-free operation, the ROD881 is equipped with rear- mounted, switchable Noise Reduction circuitry with variable Threshold control and a 1:2 noise reduction ratio. The pedal is powered via a standard 9-volt DC adaptor, allowing for easy integration into a pedalboard or rack setup. Specifications: \- Input Impedance: 500 Ohms \- Output Impedance: Less than 10K Ohms \- Equivalent Input Noise: Less than -110 dB (input shorted, IHF-A weighted)

SD-9 Sonic Distortion

The Maxon SD-9 Sonic Distortion pedal offers the best characteristics of transistor and op-amp circuits in one compact unit. It features a unique Low Boost/Hi Boost Tone control that provides more low-end beef than other effect pedals. The Distortion and Output controls can provide up to 55 dB of gain boost. At low gain settings, the SD-9 functions perfectly as a full-frequency overdrive pedal, while higher gain settings turn it into a hand-held monster, providing gut-wrenching grind and singing sustain that can make a clean amp dirty and a dirty amp downright evil. Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Maximum Output Level: 0 dBm \- Maximum Gain: +42 dB (at 2.0 KHz) \- Switch: Normal/Effect (true bypass configuration) \- Power Supply: 9V Manganese dry cell The pedal is highly versatile, offering a smooth distortion that covers a wide range of gain levels from mild overdrive through pseudo-fuzz. It is known for its ability to provide an immense range of distorted tones, from punchy overdrive to blistering fuzz, all with full-frequency response. The Maxon SD-9 Sonic Distortion pedal has been praised for its clarity, punch, and ability to retain low bass, making it equally great on both neck and bridge pickups, whether they're humbucking or single coil.

OD808 Overdrive

The Maxon OD808 Overdrive pedal is a renowned guitar effect pedal known for its warm, creamy, and organic overdrive with singing sustain. Originally designed in the late 1970s, it has become a classic in the world of guitar effects. The OD808 features the following technical specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Drive, Tone, Balance \- Switch: Normal/Effect \- Noise (IHF-A): -110 dBu \- Max Amplitude: 35 dBu \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 5 mA (9V) / 6 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 260 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The OD808 is suitable for adding smooth, tube-like overdrive to any clean amp, as well as pushing an already overdriven amp over the edge. It is also popular for tightening up high-gain amps in metal music, providing mild compression and a slight low-end cut for clarity and punchiness.

OD808

The Maxon OD808 is a renowned overdrive pedal known for its warm, creamy, and organic tube-like overdrive. It was originally designed in the late 1970s and has since become one of the most imitated and lauded overdrive circuits of all time. The OD808 features specific technical specifications as follows: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Output: 1 \- Controls: Drive, Tone, Balance \- Switch: Normal/Effect \- Noise (IHF-A): -110 dBu \- Max Amplitude: 35 dBu \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 5 mA (9V) / 6 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 260 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The OD808 is suitable for adding smooth, tube-like overdrive to any clean amp, as well as for pushing an already overdriven amp over the edge. It has been widely adopted by guitarists in various genres, including rock, blues, and metal, for its versatile and iconic tone.

OD808 Keeley Modded

The Maxon OD808 Keeley Modded overdrive pedal, also known as the OD808-40K, is a limited edition 40th Anniversary Keeley-modded version of the classic Maxon OD808. This pedal features Keeley's all-new "Max-Gain" mod, which delivers a louder, hotter, stacked-gain sound while retaining the OD808's signature tone. Specifications: \- Input Impedance: 500kΩ \- Input Jack: 1/4 inch standard phone jack \- Power Requirements: DC9-10V \- Current Consumption: 7mA \- Dimensions (main body): The OD808-40K is designed to offer a smooth, natural overdrive of a full-up tube amplifier in a compact pedal. It is incredibly dynamic and responds precisely to playing nuances, allowing the instrument's natural tone to shine through. The pedal is limited to a production of 400 individually numbered units, each with its own signed certificate of authenticity. Additionally, units 1-40 are hand-signed by Robert Keeley and feature a mini-toggle switch to go between the standard OD808 tone and the Keeley Max-Gain mod. The OD808 Keeley Modded by Maxon is well-suited for guitarists seeking a versatile overdrive pedal with enhanced gain capabilities while preserving the classic OD808 sound.

ST-01 Super Tube Screamer

The Maxon ST-01 Super Tube Screamer is a rare variant of the 808 Tubescreamer, part of Maxon's late 80s "Zero-One" series. It was originally available only in the Japanese market and has a small production run, making it a sought- after pedal. The ST-01 is built with twin JRC4558D op amps, similar to the 808 and ST-9, and features a mid-boost control pot, a unique addition not found in the 808. Specifications: \- Model: Maxon ST-01 Super Tube Screamer \- Made in: Japan \- Type: Overdrive \- Power: Standard 9V negative supply or 9V battery \- Mods: None The pedal is designed to provide overdrive effects and features controls for Drive, Level, Mid Boost, and Tone. Its robust construction and unique mid- boost feature make it a versatile tool for guitarists seeking a distinctive overdrive sound.

GE601

The Maxon GE601 Graphic Equalizer is a versatile tool designed for precise sound control across a wide range of instruments. It covers six carefully selected frequency bands over a five-octave range, offering 12 dB of boost/cut per band. The pedal can be used for various applications, including sound filtering, feedback elimination, and level boosting. Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Output: 1 \- Controls: Cut/Boost (6), Level (1) \- Switch: Normal/Effect \- Max Input: 4 dBu \- Noise (IHF-A): -110 dBu \- Max Amplitude: 12 dB \- Frequency Range: 100 Hz - 3.2 KHz \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 11 mA (9V) / 12 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 240 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The GE601 features buffered, JFET bypass switching with a low impedance output, allowing it to drive long cable lengths or other effect units without signal loss. It also incorporates a low-impedance input buffer and splits its signal into 6 parallel EQ bands, each powered by its own Op Amp (JRC4558). The pedal's wide frequency range and versatile controls make it suitable for use with a variety of instruments such as guitars, basses, and keyboards. It offers precise sound shaping capabilities and can be used to create a range of tonal effects, from pickup simulation to clean boosting and wah-like tones.

GE601 Graphic Equalizer

The Maxon GE601 Graphic Equalizer is a versatile pedal designed to provide precise control over the frequency spectrum. It covers six carefully selected frequency bands over a five-octave range with 12 dB of boost/cut per band. The frequency bands are 100 Hz, 200 Hz, 400 Hz, 800 Hz, 1.6 KHz, and 3.2 KHz. The pedal features a Master Level control with 12 dB of overall boost/cut. The GE601 can be used in various scenarios, such as a pickup simulator for transforming a humbucker into a single coil, a clean booster for solos, or to emulate the tone of a wah pedal with the treadle set halfway forward. It can also be used to fine-tune the sound of electric guitars to simulate the bright, chiming sound of an acoustic guitar with a piezo pickup. Technical specifications include an input impedance of 500K Ohms, an input jack of 1/4 inch standard phone jack, an output impedance of 10K Ohms, and an output jack of 1/4 inch standard phone jack. The pedal operates on a 9V Manganese dry cell battery or a special AC adaptor. It features buffered, JFET bypass switching with a low impedance output, allowing it to drive long cable lengths or other effect units without loss of signal. The dimensions of the main body are 61 mm (W) x 112 mm (D) x 35 mm (H), and the weight is 240 g. The package includes a 9V Manganese dry cell battery, a non-skid pad, a warranty card, and a user's manual.

FL-303 Flanger

JL-70 Jetlyzer

The Maxon JL-70 Jetlyzer is a vintage phaser pedal known for its unique sonic capabilities. Here are the technical specifications and details available: \- Input Impedance: 470k ohms \- Output Impedance: 10k ohms \- Gain: 0db \- Maximum Input Level: -15dbm \- Equivalent Input Noise: -70dbm (Input Shorted IHF-A Curve) \- Phase Control Speed: 0.2-12Hz \- Power Supply: S006p - 9V - 2pcs \- Weight: 1.2kg Controls: \- Speed: Controls the speed/rate of the LFO wave that controls the effect \- Depth: Controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps) \- Mixing: Controls the mix of dry/wet signal \- Jet On/Jet Off: Turns the distortion on/off The pedal is known for its dramatic, sweeping jet plane effect and state-of- the-art phase shifter, making it suitable for various use-cases on stage and in the recording studio.

VJR-9 Vintage Jet Riser

The VJR-9 Vintage Jet Riser by Maxon is an updated version of the vintage FL-70 Jetlyzer, designed to deliver added features and superior performance. It is an analog flanger with a voltage-controlled "Jet" effect, featuring a Jet sound generator with VCA and VCF circuits. The pedal is designed in homage to classic 70's distortion modulators such as the Flying Pan and Jetlyzer, both of which Maxon designed and built for Ibanez. Key Features and Specifications: \- Analog Bucket-Brigade Flanger as the modulation source \- Speed and Width controls for adjusting the flanging effect \- Voltage-controlled white noise generator to simulate the sound of a jet in flight \- Combination of VCA and VCF circuits for the Jet effect, reacting to playing dynamics within a preset range \- External footswitch jack for engaging the Jet effect \- True Bypass Switching with Mechanical True Bypass switching via a Fujisoku 4PDT switch \- Internal voltage-doubling circuitry for maximum headroom and to eliminate input distortion \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Output Range: +12 dBu (400 Hz) \- Controls: RANGE, JET, SENSITIVITY, SPEED, WIDTH \- Delay Time: 1.0 mSec - 30.0 mSec \- Speed Frequency: 0.04 Hz - 12 Hz \- Residual Noise: -90 dBu or less (IHF-A) \- Internal Circuit Voltage: 13 VDC (DC to DC Converter) \- Power Supply: 9 volt battery or Maxon AC adaptor \- Power Consumption: approximately 60 mA / 9 VDC \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: approximately 630 g (including battery, excluding adaptor) The VJR-9 Vintage Jet Riser offers a wide variety of effects, from classic chorus and flanging to tremolo-like auto-wah and massive jet sweeps. It can be used in the FX loop or front-end of an amp, providing flexibility in usage scenarios.

FWA10 Fuzz Elements, Water

The FWA10 Fuzz Elements, Water by Maxon is a fuzz pedal designed to emulate the early 70’s Ram’s Head Big Muff, offering warm, wooly transistor distortion and an amazingly long sustain with note “sag.” It features sustain, tone, and level controls, as well as a parametric tone circuit with frequency and cut/boost controls, providing an unlimited variety of tonal options from scooped midrange to full frequency boost. The powerful parametric equalizer of the FWA10 covers a massive frequency range from 100 Hz to 5 kHz, allowing users to select a frequency and then boost or cut to tweak their tone with pinpoint accuracy. By manipulating the EQ, users can dial in the entire palette of Big Muff variations, from the more mid-heavy, musical snarl of the original Triangle-Knob Muff to the harmonically-rich sustain of the Ram’s Head, all the way through to the super- compressed, scooped-mid mayhem of the Green Russian Sovtek’s. The FWA10 features mechanical true bypass switching, effect LED indicator, and 9-volt DC battery or external adaptor operation. It is priced at $199.00 USD and is made in Japan. The pedal has been positively reviewed for its ability to capture the ’70s “Ram’s Head” Muff tone and its jaw-dropping versatility due to the parametric EQ. It has been noted for its impressive sustain and hard-edged chunkiness, making it a desirable choice for Muff fans who want the soul of an original Muff and the sonic expansiveness of a more modern fuzz.

FW10 Fuzz Elements, Wind

The Maxon FW10 Fuzz Elements, Wind, is a guitar effects pedal designed to emulate the sound of the vintage Mk II Tonebender. It offers the following technical specifications and features: \- Fuzz engine designed to emulate the sound of vintage Mk II Tonebender \- Attack Knob controls the degree of distortion \- Level knob controls the output volume \- Vintage/Hot switch for two levels of gain \- Selectable input buffer for smoother note response \- Mechanical true bypass switching \- Effect LED indicator \- 9-Volt DC battery or external adaptor operation The pedal captures the magic of the original Mk II Tonebender and adds a modern touch of its own. It provides an edgy, aggressive tone with plenty of midrange sizzle, while also cleaning up beautifully with the volume knob and offering excellent note definition even with complex chords. Additionally, it features a Vintage/Hot switch that selects between the gain level of the original and a higher gain setting, offering more sustain for solos or to drive the amp over the edge. The selectable input buffer works to provide a more accurate, uncolored recreation of the guitar input signal. In summary, the Maxon FW10 Fuzz Elements, Wind, is designed to replicate the timeless tones of classic rock and offers versatility for various playing styles and preferences.

DS830 Distortion Master

The Maxon DS830 Distortion Master is a high-gain distortion pedal designed to deliver an amp-like character, making it suitable for classic rock guitar tones reminiscent of Marshall JCM800/900. Despite its modest array of controls, the DS830 is highly flexible, capable of generating insane amounts of gain while retaining remarkable evenness and transparency. It is also capable of producing lightly overdriven blues tones and semi-clean solo boosts at lower gain settings. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms or less \- Output Jack: 1/4 inch standard phone jack \- Equivalent Input Noise: -114 dB (VR Max) \- Residual Noise: -110 dB (Level, VR Min) \- Maximum Gain: +59 dB (VR Max) (At 1 KHz) \- Controls: Gain, Bass, Treble, Level \- Switch: Normal/Effect \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 8 mA (9 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (whole): 117 mm (W) x 150 mm (D) x 60 mm (H) \- Weight: 500 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Maxon AC210N Adaptor: (9VDC/200mA), Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The DS830 features a dual-stage clipping design in its gain section, combining the classic “808” clipping with a pair of diodes to ground, resulting in a "chewy" pedal voice. The pedal also includes complex tone controls that act as an active two-band filter, changing the gain of the treble and bass frequencies going into the Op Amp. The Bass and Treble controls are highly interactive and complementary, providing a wide range of tone-shaping possibilities. The DS830 features buffered, Mechanical bypass switching with a low impedance output, allowing it to drive long cable lengths or other effect units without signal loss.

FA10 Fuzz Elements, Air

The Maxon FA10 Fuzz Elements, Air is a guitar effect pedal designed to faithfully reproduce the octave harmonics and unique square wave clipping of the vintage Univox Super Fuzz. The pedal features analog circuitry that captures the crushing, compressed tone of the Super Fuzz with surgical accuracy. It offers two distinct fuzz tones, which can be selected using the Fat/Scoop switch, providing a drastic change in EQ. The pedal is housed in a rugged enclosure and features true bypass switching for seamless integration into pedalboard setups. The Maxon FA10 Fuzz Elements, Air is designed to operate with a 9V battery or a standard AC adaptor for 9V (not included). The specifications of the pedal include an input impedance of 100k ohms, an output impedance of 100k ohms, and a maximum gain of 56dB (800Hz) FAT. The pedal is made in Japan and is a part of the Maxon Fuzz Elements series, which aims to reproduce the classic and unique sounds of the world's most desirable vintage Fuzz pedals using advanced analog circuitry.

FF10 Fuzz Elements Fire

The FF10 Fuzz Elements Fire by Maxon is designed to replicate the enormous, bottom-heavy octave-fuzz sounds of the Roland Bee Baa. It offers two distinctly different fuzz tones accessible via the Notch footswitch. The pedal features mechanical true bypass switching, an Effect LED Indicator, and operates on a 9-Volt DC Battery or external adaptor. The input impedance is 100k ohms, the output impedance is 100k ohms, and the maximum gain is 56dB (1.2 kHz) NOTCH. The FF10 also features square wave clipping with upper octave harmonic, providing thick, muscular distortion with excellent note definition and clean-up. Additionally, it offers two distinct fuzz tones via the Notch footswitch, allowing users to toggle between these tones in mid-song. The pedal is smaller and less expensive than the original it was inspired by, yet it is just as effective.

FV-10 Fuzz Elements, Void

The Maxon FV-10 Fuzz Elements Void is a unique guitar effect pedal designed to emulate the vintage Ampeg Scrambler. It features a fuzz engine that produces frequency- and dynamics-dependent fuzz/octavia effects, with an overtone knob to control the amount of even-order harmonics. The blend knob allows for balancing dry and affected signals, while the level knob provides output level control, functioning as a booster. The pedal is known for creating spongy, synthetic guitar tones that can produce octave-up or octave-down effects, depending on the control settings and playing position on the neck. It is capable of generating unique sounds from both single notes and chords. When combined with other distortion devices and adjusted using the blend knob, the FV-10 can produce a new range of fuzz/distortion effects as its circuit interacts with the harmonic content of the other device. The FV-10 features mechanical true bypass switching to ensure that the chaotic effects are only engaged when desired. It also includes an effect LED indicator and operates on a 9-volt DC battery or external adapter. Technical Specifications: \- Input Impedance: 150k ohms \- Output Impedance: 10k ohms \- Maximum Gain: 28dB (1kHz) \- Input Noise: -106dB or less (Input shorted, IHF-A weighted) \- Controls: Overtone, Level, Blend \- Switch: Bypass/Effect \- Indicator: Bypass/Effect LED \- Power Supply: 9V DC battery or Maxon AC adaptor \- Power Consumption: 9mA/9VDC \- Battery Life: 9VDC manganese battery 57 hours at 25°C (FUJITSU 6F22), 9VDC alkaline battery 86 hours at 25°C (TOSHIBA 6LF22) \- Dimensions: 70(W)×113(D)×56(H)mm (with protrusion) \- Weight: Approx. 320g (including battery)

OD-9 Pro+ Overdrive

The Maxon OD-9 Pro+ Overdrive is a versatile pedal designed for guitarists seeking high-quality overdrive effects. Here are the technical specifications and features: \- Overdrive based on classic OD-9 circuit \- Switchable 9- or 18-volt operation (runs on 9 VDC) \- More Gain and Low-End in 18-volt setting \- Mid Boost Switch adds +3 dB @ 800 Hz \- NJM4558 (JRC) Op Amp \- True Bypass Switching \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Equivalent Input Noise: -116 dB or less (input shorted IHF-A weighted) \- Maximum Gain: Normal 43 dB (at 1.5 KHz), Boost 46 dB (1 KHz) \- Controls: Drive, Tone, Level, Boost/Normal switch, 9/18 volt operation switch \- Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 35 mA (9 V) / 32 mA (10 V) at 18 volts, 27 mA (9 V) / 27 mA (10 V) at 9 volts \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) \- Weight: 580 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Warranty Card x 1, User's Manual x 1 The OD-9 Pro+ offers the flexibility of 9- or 18-volt operation, providing different tonal characteristics and increased headroom. The Mid Boost Switch enhances the pedal's versatility, allowing for a +3 dB midrange boost at approximately 800 Hz, ideal for solos and cutting through a band. The pedal's circuitry incorporates a jFET buffer, Op Amp with clipping diodes, and voltage conversion chip for improved performance.

Overdrive Extreme (OD808X)

The Maxon Overdrive Extreme (OD808X) is a modified version of the classic OD808 Overdrive pedal, designed to offer extended frequency response for improved note definition and clarity. It features increased output (+5 dB over OD808) for extra volume boost and harder clipping for a more aggressive, amp- like distortion. The pedal is equipped with buffered bypass switching and shares the same basic circuit architecture as the OD808, with altered component values to achieve the ultimate overdrive tone. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Maximum Gain: 40dB (2 kHz) \- Input Noise: -110dB or less (Input shorted, IHF-A weighted) \- Controls: DRIVE, TONE, LEVEL \- Switch: BYPASS/EFFECT (Buffered Electronic Bypass) \- Indicator: BYPASS/EFFECT LED \- Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor \- Power Consumption: 7.2mA max. / 9VDC \- Battery Life: 9VDC manganese battery 78 hours 25 deg C (FUJITSU 6F22), 9VDC alkaline battery 114 hours 25 deg C (TOSHIBA 6LF22) \- Dimensions: 70(W) x 113(D) x 56(H) mm \- Weight: Approx. 300g (incl. battery) \- Accessory: 6F22 9V battery x 1, operating manual The OD808X is designed to create a versatile, amp-like overdrive with excellent note clarity that won’t get lost in a mix. It offers a wider frequency response than a stock OD808, with an extended hi-frequency tonal range that provides additional clarity without becoming harsh. The pedal is suitable for use in various musical applications, offering a powerful and dynamic overdrive effect.

VOP-9 Vintage Overdrive Pro

The VOP-9 Vintage Overdrive Pro by Maxon is a versatile pedal designed for guitarists seeking warm, smooth overdrive tones without compromising the natural characteristics of their guitar and amp setup. The pedal features an internal charge pump that allows for switchable 9 or 18-volt operation, providing increased headroom and a fuller frequency response at the higher voltage setting. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 46dB at 1.5kHz \- Equivalent Input Noise: 112dB or less (IHF-A) \- Controls: DRIVE, TONE, LEVEL \- Mechanical True Bypass switching via a Fujisoku 4PDT switch \- Operating Voltage: 18V (+-9V)/ 9V (+-4.5V) switch \- Power Consumption: 30mA/9V, 28mA/10V at operating voltage 18V (+-9V); 23mA/9V, 24mA/10V at operating voltage 9V (+-4.5V) \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 580g (including battery) \- Battery: 9V battery (6LR61 or 6F22) x 1 or Maxon AC adaptor \- Battery life: Manganese dry battery +-9V 3.5 hours, Alkaline dry battery +-9V 10 hours, Manganese dry battery +-4.5V 8 hours, Alkaline dry battery +-4.5V 20 hours (all at 25°C / 77°F) The pedal's design is based on Maxon's legendary "808" circuit, with a dual- ganged Drive pot that controls the amount of Gain as well as the mix between clean and distorted signals. Additionally, the VOP-9 features a standard 808-style tone control and operates at 18 volts via an internal voltage doubler, providing greater output and a fuller frequency response without the midrange spike typically associated with the 808 circuit. The VOP-9 Vintage Overdrive Pro is suitable for a wide range of use-cases, from achieving the ultimate blues tone to providing an added push for solos. It has been favored by exceptional guitarists including Scott Henderson, Dave Weiner, Jeff Loomis, Doug Rappoport, and Stuart Ziff.

OD808X Overdrive Extreme

The Maxon OD808X Overdrive Extreme is a modified version of the classic OD808 Overdrive pedal. It offers an extended frequency response for improved note definition and clarity, as well as increased output (+5 dB over OD808) for extra volume boost. The pedal features a harder clipping pattern than the standard model, creating a searing, full-bodied drive tone that helps chords ring and notes sing. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Maximum Gain: 40dB (2 kHz) \- Input Noise: -110dB or less (Input shorted, IHF-A weighted) \- Controls: DRIVE, TONE, LEVEL \- Switch: BYPASS/EFFECT (Buffered Electronic Bypass) \- Indicator: BYPASS/EFFECT LED \- Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor \- Power Consumption: 7.2mA max. / 9VDC \- Battery Life: \- 9VDC manganese battery: 78 hours at 25°C (FUJITSU 6F22) \- 9VDC alkaline battery: 114 hours at 25°C (TOSHIBA 6LF22) \- Dimensions: 70(W) x 113(D) x 56(H) mm \- Weight: Approx. 300g (including battery) \- Accessory: 6F22 9V battery x 1, operating manual The OD808X features a low-impedance buffered bypass, allowing it to drive long cable lengths or other effect units without loss of signal. It is designed to provide a versatile, amp-like overdrive with excellent note clarity that won’t get lost in a mix.

OD-02 Overdrive

OD-9 Pro+

The Maxon OD-9 Pro+ Overdrive pedal is a versatile and high-performance effects unit designed for guitarists seeking premium overdrive capabilities. The pedal features a range of technical specifications and innovative design elements, making it a valuable addition to any musician's setup. Key Technical Specifications: \- Overdrive based on classic OD-9 \- Switchable 9- or 18-volt operation (runs on 9 VDC) \- More Gain and Low-End (18-volt setting) \- Mid Boost Switch adds +3 dB @ 800 Hz \- NJM4558 (JRC) Op Amp \- True Bypass Switching \- Stabilized DC-DC voltage converter for increased headroom \- Die Cast Zinc Chassis for durability \- Easy-Access, No Tools Battery Compartment \- AC/DC Power Operation \- LED Power/Battery Life Indicator \- Dimensions: 74(W)×124(D)×54(H)mm \- Weight: 580g (including battery) Functionality and Design: The OD-9 Pro+ utilizes a signal-distorting diode (Panasonic #MA150) located in the amplifier stage's negative feedback loop, resulting in a smoother, milder, and more natural sounding distortion. The addition of a low-noise NEC uPC4570 OP-Amp in the output stage allows for less compression and a more balanced frequency response. The pedal also features a switchable Boost mode that enhances midrange and overdrive levels, creating a thicker, slightly compressed overdrive tone. The inclusion of a stabilized DC-DC voltage converter offers a wider dynamic range and increased headroom, with switchable 9- or 18-volt operation providing flexibility in achieving classic OD-9 pedal tone or a newer, full- frequency tone. The OD-9 Pro+ is built with True Bypass Switching for uncompromised tone in bypass, and its die-cast zinc chassis ensures durability while providing easy switching access. The pedal also includes an easy-access, no-tools battery compartment and an LED power/battery life indicator for user convenience. Overall, the Maxon OD-9 Pro+ Overdrive pedal combines classic overdrive with modern enhancements, offering guitarists a versatile and reliable tool for achieving a wide range of tones and effects.

D&S II

The Maxon D&S; II Distortion Sustainer pedal is designed with a dual op-amp configuration similar to the OD808, providing increased low-end, output, and gain. The pedal offers complete control over the distortion effect, ranging from subtle crunch to intense saturation, through its Distortion, Tone, and Balance knobs. Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Distortion, Tone, Balance \- Switch: Normal/Effect \- Noise (IHF-A): -110 dBu \- Max Amplitude: 40 dBu \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 6 mA (9V) / 7 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 260 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1

PT999

The Maxon PT999 Phase Tone pedal is a compact and versatile phaser unit designed for guitar and bass effects. It offers a range of authentic 70's era phasing effects in a current production unit. The PT999 features a minimalist circuit with a single knob and switch, allowing for a wide variety of expressive phasing nuances. The circuit used in the PT999 is unchanged since its introduction in 1974, providing a timeless tone. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Rate \- Switch: Normal/Effect \- Max Input Level: 0 dBu \- Noise (IHF-A): -80 dBu \- Speed Frequency: 0.2 Hz ­ 14 Hz \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 12 mA (9V) / 14 mA (10 V) \- AC Adaptor AC210N (optional) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 270 g The PT999's four-stage phasing circuit offers 720 degrees of phasing sweep variable from 0.2 to 14 Hz. The FET's (Toshiba #2SK246) are carefully sorted and matched by hand to produce a smooth phasing sweep with low noise. The pedal runs negative feedback of the signal to each phase-shifting FET for less distortion. Internal trimmers adjust center frequency and width of the phasing sweep, calibrated prior to market. The PT999 Phase Tone pedal is designed to provide classic phase shifting effects without compromising the guitar's signature tone, making it a valuable addition to any musician's effects arsenal.

ROD881 Real Overdrive

The Maxon ROD881 Real Overdrive is a versatile pedal designed to provide a wide range of overdriven tube sounds and distortion tones. It is powered by a hand-selected 12AX7WXT preamp tube, which enhances the overdriven tube sounds and adds a switchable Distortion mode for searing, super-saturated guitar tones. The ROD881 features a switchable Distortion mode that adds a secondary, cascaded gain stage into the signal path for extreme tube punishment. This mode greatly increases the pedal's versatility, allowing it to function in various roles from semi-clean booster to ultra-high gain preamp. Additionally, the pedal includes a Footswitchable Boost mode, effectively adding another channel to the amplifier for quick changes between solos and rhythms. The control panel of the ROD881 allows for precise command of the output level and amount of Drive, with controls for Gain, Master Volume, Bass, Treble, and Mid Boost. These controls offer a wide array of tonal options, from classic 808 tones to extremely beefy low-end chunk. To maintain clean and noise-free operation, the ROD881 is equipped with rear- mounted, switchable Noise Reduction circuitry with variable Threshold control and a 1:2 noise reduction ratio. The pedal is powered via a standard 9-volt DC adaptor, allowing for easy integration into a pedalboard or rack setup. Specifications: \- Input Impedance: 500 Ohms \- Output Impedance: Less than 10K Ohms \- Equivalent Input Noise: Less than -110 dB (input shorted, IHF-A weighted)

OD-820 Overdrive Pro

SD-9 Sonic Distortion

The Maxon SD-9 Sonic Distortion pedal offers the best characteristics of transistor and op-amp circuits in one compact unit. It features a unique Low Boost/Hi Boost Tone control that provides more low-end beef than other effect pedals. The Distortion and Output controls can provide up to 55 dB of gain boost. At low gain settings, the SD-9 functions perfectly as a full-frequency overdrive pedal, while higher gain settings turn it into a hand-held monster, providing gut-wrenching grind and singing sustain that can make a clean amp dirty and a dirty amp downright evil. Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Maximum Output Level: 0 dBm \- Maximum Gain: +42 dB (at 2.0 KHz) \- Switch: Normal/Effect (true bypass configuration) \- Power Supply: 9V Manganese dry cell The pedal is highly versatile, offering a smooth distortion that covers a wide range of gain levels from mild overdrive through pseudo-fuzz. It is known for its ability to provide an immense range of distorted tones, from punchy overdrive to blistering fuzz, all with full-frequency response. The Maxon SD-9 Sonic Distortion pedal has been praised for its clarity, punch, and ability to retain low bass, making it equally great on both neck and bridge pickups, whether they're humbucking or single coil.

OSD-9 Overdrive Soft Distortion

The OSD-9 Overdrive Soft Distortion by Maxon is a reissue of the company's first Overdrive pedal, the OD880, originally released in 1977. It offers a low-gain, natural overdrive similar to a tube amp and works effectively as an amp booster. The pedal can be stacked with other overdrive pedals for increased tonal options. Key Features: \- Reissue of Maxon’s first Overdrive - OD880 - circa 1977 \- Low gain, natural overdrive like a tube amp \- Works great as an amp booster \- Stackable with other OD’s for increased tonal options \- NOS UA741 Op Amps for authentic vintage tone \- Regulated 9 VDC power \- True Bypass Switching Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 41.5dB (700Hz) \- Equivalent Input Noise: -107dB or less (IHF-A) \- Control: DRIVE, LEVEL \- Operating Voltage: 9V \- Power Consumption: 14mA/DC 9V, 14mA/DC 10V \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 580g (including battery) \- Battery: 9V battery (6LR61 or 6F22) x 1 or Maxon AC adaptor \- Battery life: Manganese dry battery 17 hours 25deg C / 77deg F (Panasonic 6F22NB), Alkaline dry battery 34 hours 25deg C / 77deg F (Panasonic 6LR61G) The OSD-9 utilizes a passive distortion circuit based around the 741 Op Amp, providing warm and natural overdrive tones. It features mechanical true bypass switching and a voltage regulator for smooth, consistent performance. The pedal's signal path includes a 2SK246 jFET buffer, UA741CP Op Amps, diodes, and a NJM2374A Voltage converter to stabilize the operating voltage at 9 VDC.

OD808 Overdrive

The Maxon OD808 Overdrive pedal is a renowned guitar effect pedal known for its warm, creamy, and organic overdrive with singing sustain. Originally designed in the late 1970s, it has become a classic in the world of guitar effects. The OD808 features the following technical specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Drive, Tone, Balance \- Switch: Normal/Effect \- Noise (IHF-A): -110 dBu \- Max Amplitude: 35 dBu \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 5 mA (9V) / 6 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 260 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The OD808 is suitable for adding smooth, tube-like overdrive to any clean amp, as well as pushing an already overdriven amp over the edge. It is also popular for tightening up high-gain amps in metal music, providing mild compression and a slight low-end cut for clarity and punchiness.

OD808

The Maxon OD808 is a renowned overdrive pedal known for its warm, creamy, and organic tube-like overdrive. It was originally designed in the late 1970s and has since become one of the most imitated and lauded overdrive circuits of all time. The OD808 features specific technical specifications as follows: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Output: 1 \- Controls: Drive, Tone, Balance \- Switch: Normal/Effect \- Noise (IHF-A): -110 dBu \- Max Amplitude: 35 dBu \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 5 mA (9V) / 6 mA (10 V) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 260 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Non-skid pad x 1, Warranty Card x 1, User's Manual x 1 The OD808 is suitable for adding smooth, tube-like overdrive to any clean amp, as well as for pushing an already overdriven amp over the edge. It has been widely adopted by guitarists in various genres, including rock, blues, and metal, for its versatile and iconic tone.

RTO700 Real Tube Overdrive

The RTO700 Real Tube Overdrive by Maxon is a highly versatile pedal with specific technical specifications. Here are the details: Features: \- Overdrive with real Vacuum Tube \- Three cascading Gain stages - NO Clipping diodes \- Three-band tone circuit with Bass, Midrange, and Treble \- Switchable Noise Suppressor with variable Threshold \- Heater In-rush current control warms tube upon power-up \- True Bypass Switching Functionality: \- The RTO700 is designed to provide an amp-like overdrive, offering a wide range of tones and responsiveness similar to boutique tube amps. \- It features three cascading gain stages with an extremely high output level, providing warm and authentic tube tone. \- The pedal's 3-band EQ circuit is highly versatile, allowing users to dial in any tone imaginable with interactive controls. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms \- Max Gain: 72dB (at 1.8 kHz) \- Equivalent Input Noise: -102dBu or less (Input shorted, IHF-A weighted) \- Control: GAIN, NR, MASTER, BASS, MID, TREBLE \- Switch: BYPASS/EFFECT (Mechanical 3PDT), NR ON/OFF \- I/O: INPUT JACK, OUTPUT JACK, DC INPUT JACK \- Indicator: BYPASS/EFFECT LED, GATE LED \- Internal Circuit Voltage: 12.6VDC (DC to DC Converter) \- Power Consumption: 400mA / 9VDC \- Dimensions: 121 (W) × 152(D) × 60 (H) mm / 4.8” (W) x 6” (D) x 2.4” (H) \- Weight: Approx. 600g / 1.3 Lbs. (without power supply) \- Power Supply: AC adaptor AC2009 The RTO700 Real Tube Overdrive is a discontinued item and was manufactured by Maxon.

OD808 Keeley Modded

The Maxon OD808 Keeley Modded overdrive pedal, also known as the OD808-40K, is a limited edition 40th Anniversary Keeley-modded version of the classic Maxon OD808. This pedal features Keeley's all-new "Max-Gain" mod, which delivers a louder, hotter, stacked-gain sound while retaining the OD808's signature tone. Specifications: \- Input Impedance: 500kΩ \- Input Jack: 1/4 inch standard phone jack \- Power Requirements: DC9-10V \- Current Consumption: 7mA \- Dimensions (main body): The OD808-40K is designed to offer a smooth, natural overdrive of a full-up tube amplifier in a compact pedal. It is incredibly dynamic and responds precisely to playing nuances, allowing the instrument's natural tone to shine through. The pedal is limited to a production of 400 individually numbered units, each with its own signed certificate of authenticity. Additionally, units 1-40 are hand-signed by Robert Keeley and feature a mini-toggle switch to go between the standard OD808 tone and the Keeley Max-Gain mod. The OD808 Keeley Modded by Maxon is well-suited for guitarists seeking a versatile overdrive pedal with enhanced gain capabilities while preserving the classic OD808 sound.

ST-9 Super Tube

The ST-9 Super Tube by Maxon, also known as the ST-9 Pro+, is an updated reissue of the 1980's Super Tube Screamer, with a circuit based on the classic OD-9/OD808. It features a dedicated Midrange knob to dial in the amount of mid boost and a Low Boost switch that adds low-end punch, making it suitable for single-coil pickups. The pedal offers switchable 9- or 18-volt operation for increased headroom and improved dynamics. The ST-9 Pro+ is designed with a 2SK246 jFET buffer for high input impedance and low output impedance into the first Op Amp, a NJM (JRC) 4558D. The pedal also includes a tweakable mid boost, switchable sets of diodes in the feedback loop, and a switchable capacitor to boost bass. It utilizes an NJM2374A Voltage converter to double the 9V input to 18 VDC, providing more clean headroom before the Op Amps distort. The pedal's features include Mechanical True Bypass switching via a Fujisoku 4PDT switch, and it can be powered by a 9V battery or a Maxon AC adaptor. The ST-9 Pro+ has the following technical specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 51dB (2.2 kHz) \- Equivalent Input Noise: -115dB or less (IHF-A) \- Control: MID ENHANCE, DRIVE, TONE, LEVEL \- Switch: Bypass/Effect, Voltage Switch (9V/18V), MODE Switch (CLASSIC/LOW BOOST) \- Indicator: Bypass/Effect LED, 9V LED, 18V LED \- Internal Circuit Voltage: 9VDC / 18VDC (DC / DC Converter) \- Power Consumption: 12mA/9VDC, 36mA/18VDC \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 610g (including battery, excluding AC adaptor) The ST-9 Super Tube Pro+ is a versatile and powerful distortion pedal suitable for a wide range of playing styles, from bluesy overdrive to heavy distortion.

OD-9 Overdrive

The Maxon OD-9 Overdrive is a highly regarded pedal known for its classic tonality and tube-driven tone. Here are the technical specifications and features: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 48.5 dB (1.6 KHz) \- Equivalent Input Noise: -106.8 dB or less (IHF-A) \- Controls: TUBE, DRIVE, TONE, LEVEL \- Switch: BYPASS/EFFECT (mechanical TBS) \- In/Out: INPUT, OUTPUT \- Indicator: BYPASS/EFFECT LED \- Internal Circuit Voltage: 30 VDC (DC-DC Converter) \- Current Consumption: 260 mA / 9 VDC \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) / 2.9” (W) x 4.9” (D) x 2.13” (H) \- Weight: 560 g (excluding AC adaptor) / 19.75 Oz. \- Power Supply: Maxon AC2009 (no battery operation) The OD-9 features a mil-spec 5703WB JAN Raytheon sub-miniature vacuum tube with a separate Gain control (Tube knob) at the front of the audio path, driving the OD-9 circuit. The tube stage adds warmth, dimension, and saturation to the tone, providing a big, FAT, natural-sounding bottom end and characteristic tube "sag." The pedal also incorporates internal voltage doublers to stabilize tone with low distortion and increased headroom. Additionally, it includes Maxon’s In- Rush Current Control system to extend tube life and Mechanical True Bypass switching via a Fujisoku 4PDT switch. The OD-9 is a true-to-spec reissue of the legendary 1980’s OD-9/TS-9 circuit, with the addition of true bypass switching for clean, uncolored tone when bypassed.

OD820

The Maxon OD820 Overdrive Pro is a clean booster/overdrive pedal designed specifically for tube amps. It offers a fuller frequency response and less noise, making it extremely responsive to fingering and picking touch. The pedal features a dual-purpose Drive control with Clean Blend function and operates at 18 volts for additional headroom, although it can be powered off 9 VDC. The OD820 provides low impedance, mechanical bypass switching. Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms or less \- Output Jack: 1/4 inch standard phone jack \- Equivalent Input Noise: -107 dB (VR Max) \- Residual Noise: -98 dB (Level, VR Min) \- Maximum Gain: +46 dB (VR max) (at 1 KHz) \- Maximum Amplitude: +16 dB (At 1 KHz) \- Controls: Drive, Tone, Level \- Switch: Normal/Effect (true bypass configuration) \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 19 mA (10 VDC) \- Dimensions (whole): 117 mm (W) x 150 mm (D) x 60 mm (H) \- Weight: 500 g The OD820 circuit is a hot-rodded 808 with a JFET input buffer, dual-gang Drive pot, and standard 808-style tone control. It runs at 18 volts via an internal voltage doubler, providing greater output and a fuller frequency response. The pedal features buffered, mechanical bypass switching with a low impedance output, allowing it to drive long cable lengths or other effect units without loss of signal. The Maxon OD820 Overdrive Pro is a versatile pedal suitable for guitarists seeking a transparent overdrive with enhanced headroom and dynamic response.

OD-9

The Maxon OD-9 is a highly regarded overdrive pedal known for its classic TS-9 circuitry. It features true bypass switching for clean, uncolored tone when bypassed. The pedal has an input impedance of 500K Ohms and an output impedance of 10K Ohms or less. The maximum gain is 48.5 dB at 1.6 KHz, and the equivalent input noise is -106.8 dB or less (IHF-A). The OD-9 has controls for TUBE, DRIVE, TONE, and LEVEL, allowing for precise tonal shaping and gain adjustment. It operates on 9V DC center negative power supply, with a power consumption of 6 mA. The internal circuit voltage is 30 VDC, achieved through a DC-DC converter. The pedal's dimensions are 74 mm (W) x 124 mm (D) x 54 mm (H), and it weighs 560 g (excluding AC adaptor). The OD-9's design incorporates a mil-spec 5703WB JAN Raytheon sub-miniature vacuum tube positioned at the front of the audio path, driving the OD-9 circuit. This tube stage adds warmth, dimension, and increased saturation to the classic OD-9 tone, providing a big, natural-sounding bottom end and characteristic tube "sag." The pedal features mechanical true bypass switching via a Fujisoku 4PDT switch, ensuring minimal tone coloration when the effect is disengaged. The Maxon OD-9 is a versatile overdrive pedal suitable for a wide range of musical styles and applications, offering classic tonality with the added warmth and saturation of a tube stage.

ST-01 Super Tube Screamer

The Maxon ST-01 Super Tube Screamer is a rare variant of the 808 Tubescreamer, part of Maxon's late 80s "Zero-One" series. It was originally available only in the Japanese market and has a small production run, making it a sought- after pedal. The ST-01 is built with twin JRC4558D op amps, similar to the 808 and ST-9, and features a mid-boost control pot, a unique addition not found in the 808. Specifications: \- Model: Maxon ST-01 Super Tube Screamer \- Made in: Japan \- Type: Overdrive \- Power: Standard 9V negative supply or 9V battery \- Mods: None The pedal is designed to provide overdrive effects and features controls for Drive, Level, Mid Boost, and Tone. Its robust construction and unique mid- boost feature make it a versatile tool for guitarists seeking a distinctive overdrive sound.

OOD-9 Organic Overdrive

The Maxon OOD-9 Organic Overdrive is an updated version of Maxon’s first Overdrive, the OD880, originally released in 1977. It is designed to provide low gain, dynamic overdrive similar to a tube amp and can be used as an amp booster. The pedal features NJM (JRC) 4558 Op Amps for a modern tone and regulated 9 VDC power. It offers true bypass switching for smooth, consistent performance. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 41.5dB (700Hz) \- Equivalent Input Noise: -107dB or less (IHF-A) \- Control: DRIVE, LEVEL \- Operating Voltage: 9V \- Power Consumption: 18mA/DC 9V, 18mA/DC 10V \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 580g (including battery) \- Battery: 9V battery (6LR61 or 6F22) x 1 or Maxon AC adaptor \- Battery life: Manganese dry battery 10.5 hours 25°C / 77°F (Panasonic 6F22NB), Alkaline dry battery 23 hours 25°C / 77°F (Panasonic 6LR61G) The OOD-9 utilizes a NJM2374A Voltage converter to stabilize the operating voltage at 9 VDC regardless of the voltage level coming off the battery, providing a smoother, more consistent operation and tonality. The pedal's signal path includes a 2SK246 jFET buffer, NJM4558 Op Amps, and a voltage converter for stable performance.

OOD-9 Organic Overdrive Pedal

The Maxon OOD-9 Organic Overdrive Pedal is a versatile and high-quality effects pedal designed for guitarists seeking warm, open-sounding overdrive with a pronounced high-frequency response. The pedal features a 2SK246 jFET buffer at the beginning of the signal path, providing high input impedance and low output impedance into the first Op Amp – a NJM (JRC) 4558. This Op Amp is set up to provide a 20 to 120x gain in signal. The signal then passes through a pair of diodes to ground, similar to classic boxes such as the MXR Distortion+, Pro Co Rat, and Boss DS-1. The OOD-9 also includes a NJM2374A Voltage converter to stabilize the operating voltage at 9 VDC, ensuring a smoother and more consistent operation and tonality. It features Mechanical True Bypass switching via a Fujisoku 4PDT switch, and its voltage regulator IC requires a high inrush current of approximately 2000 mA upon startup. Key technical specifications include: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 41.5dB (700Hz) \- Equivalent Input Noise: -107dB or less (IHF-A) \- Control: DRIVE, LEVEL \- Operating Voltage: 9V \- Power Consumption: 18mA/DC 9V, 18mA/DC 10V \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 580g (including battery) The OOD-9 Organic Overdrive Pedal is an updated version of Maxon’s first Overdrive - OD880, circa 1977, and is suitable for use as a stand-alone dirt box, for pushing an amp, or for stacking with other OD’s to add clarity and character to the tone. It is housed in Maxon’s indestructible, industry- standard 9-Series chassis and features modern-day utility features such as mechanical true bypass switching and a voltage regulator for smooth, consistent performance.

ST-9 Pro+ Supertube

The ST-9 Pro+ Supertube by Maxon is a versatile overdrive pedal designed to deliver powerful and responsive distortion tones. It is an updated reissue of the 1980s Super Tube Screamer, based on the classic OD-9/OD808 circuit. The pedal features a dedicated Midrange knob to control the amount of mid boost, providing heavy, thick, and powerful distortion sounds similar to a full-stack amplifier. Key Features: \- Loosely based on Maxon's classic “808” circuit \- Dedicated Midrange knob for controlling the amount of midrange boost \- Low Boost switch for adding low-end punch, suitable for single coils \- Switchable 9V or 18V operation for increased dynamic headroom and fuller frequency response \- True Bypass Switching for preserving the integrity of the guitar signal \- Mechanical True Bypass switching via a Fujisoku 4PDT switch \- Internal charge pump for voltage conversion from 9V to 18V \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Gain: 51dB (2.2 kHz) \- Equivalent Input Noise: -115dB or less (IHF-A) Technical Specifications: \- Power Consumption: 12mA/9VDC, 36mA/18VDC \- Dimensions: 74 (W) x 124 (D) x 54 (H) mm \- Weight: 610g (including battery, excluding AC adaptor) \- Power Supply: 6F22 / 6LR6 9V battery x 1 or Maxon AC adaptor \- Standard Accessory: AC adaptor AC2009, user's guide \- Battery life: 9VDC manganese battery 26 hours @ 25 degrees C, 9VDC alkaline battery 48 hours @ 25 degrees C, 18VDC manganese battery 2 hours @ 25 degrees C, 18VDC alkaline battery 8 hours @ 25 degrees C

PH-350 Rotary Phaser

PT999

The Maxon PT999 Phase Tone pedal is a compact and versatile phaser unit designed for guitar and bass effects. It offers a range of authentic 70's era phasing effects in a current production unit. The PT999 features a minimalist circuit with a single knob and switch, allowing for a wide variety of expressive phasing nuances. The circuit used in the PT999 is unchanged since its introduction in 1974, providing a timeless tone. Key Technical Specifications: \- Input Impedance: 500K Ohms \- Input Jack: 1/4 inch standard phone jack \- Output Impedance: 10K Ohms \- Output Jack: 1/4 inch standard phone jack \- Controls: Rate \- Switch: Normal/Effect \- Max Input Level: 0 dBu \- Noise (IHF-A): -80 dBu \- Speed Frequency: 0.2 Hz ­ 14 Hz \- Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 12 mA (9V) / 14 mA (10 V) \- AC Adaptor AC210N (optional) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions (main body): 61 mm (W) x 112 mm (D) x 35 mm (H) \- Dimensions (whole): 70 mm (W) x 112 mm (D) x 55 mm (H) \- Weight: 270 g The PT999's four-stage phasing circuit offers 720 degrees of phasing sweep variable from 0.2 to 14 Hz. The FET's (Toshiba #2SK246) are carefully sorted and matched by hand to produce a smooth phasing sweep with low noise. The pedal runs negative feedback of the signal to each phase-shifting FET for less distortion. Internal trimmers adjust center frequency and width of the phasing sweep, calibrated prior to market. The PT999 Phase Tone pedal is designed to provide classic phase shifting effects without compromising the guitar's signature tone, making it a valuable addition to any musician's effects arsenal.

PT-9

The Maxon PT-9 Pro+ is a compact phase shifter pedal that features a completely redesigned circuit superior to the original PT-9. It offers 12-stage optical phasing, providing liquid, fluid sounds reminiscent of legendary 70s units without the vintage hassles. The pedal includes Rate, Depth, and Feedback controls for complete control of the phasing effect, along with a Rate status LED for accurate matching of the phasing sweep with song tempo. The PT-9 Pro+ operates on 18-volt circuitry, providing maximum headroom with ultra-low noise operation and full frequency response for use with any instrument. The pedal's wide-range LFO offers a variety of phasing effects, from lethargic climbs to Rotary Speaker shimmers. It can imitate classic phaser sounds at low Width/Feedback settings and produce chewy, vocal filtering at higher settings. The PT-9 Pro+ can be used in an effects loop or with extended range instruments such as bass guitar, and it works equally well pre- or post- distortion, offering a wide range of tonal possibilities. Technical Specifications: \- 12-stage optical phasing \- Rate, Depth, and Feedback controls \- Rate status LED \- 18-volt circuitry \- Wide-range LFO \- True bypass \- Analog \- Mono The Maxon PT-9 Pro+ is a versatile and high-quality phase shifter pedal suitable for a wide range of musical styles and instruments.

JL-70 Jetlyzer

The Maxon JL-70 Jetlyzer is a vintage phaser pedal known for its unique sonic capabilities. Here are the technical specifications and details available: \- Input Impedance: 470k ohms \- Output Impedance: 10k ohms \- Gain: 0db \- Maximum Input Level: -15dbm \- Equivalent Input Noise: -70dbm (Input Shorted IHF-A Curve) \- Phase Control Speed: 0.2-12Hz \- Power Supply: S006p - 9V - 2pcs \- Weight: 1.2kg Controls: \- Speed: Controls the speed/rate of the LFO wave that controls the effect \- Depth: Controls the depth/amplitude of the modulation (the size of the range in which the effect sweeps) \- Mixing: Controls the mix of dry/wet signal \- Jet On/Jet Off: Turns the distortion on/off The pedal is known for its dramatic, sweeping jet plane effect and state-of- the-art phase shifter, making it suitable for various use-cases on stage and in the recording studio.

PT-9 Pro+

The PT-9 Pro+ by Maxon is an optical phase shifter pedal designed to deliver a wet, drippy, and 3-dimensional phasing sound reminiscent of vintage units such as the Mu-Tron Phaser II and the Shin-Ei Uni-Vibe. It features 18-volt operation for increased headroom and wider frequency response, making it suitable for use pre- or post-distortion, in an FX loop, or in the front-end of an amp. The pedal is equipped with a Rate LED that displays oscillator speed and offers true bypass switching. Technical Specifications: \- Input Impedance: 500K Ohms \- Output Impedance: 10K Ohms or less \- Maximum Output Level: +18 dBu (1 KHz) \- Controls: SPEED (0.055 to 8.3 Hz), FEEDBACK, WIDTH \- Residual Noise: 95 dBu (input shorted, IHF-A weighted) \- Internal Circuit Voltage: Stabilized +/-9V DC-DC converter \- Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor \- Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor) \- Current Consumption: 32 mA (9 V) / 30 mA (10 V) at 18 volts \- Battery Life: Approximately 3 hours @ 77°F / 25°C (Panasonic NEO battery 6F22NB), Approximately 8.4 hours @ 77°F / 25°C (Panasonic Alkaline battery 6LF61G) \- AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve + \- Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) \- Weight: 580 g \- Accessories: 9V Manganese dry cell battery (S-006P) x 1, Warranty Card x 1, User's Manual x 1 The PT-9 Pro+ utilizes a NJM2374A voltage conversion chip to increase the headroom of the Op Amps and clean up the phase sweep. It also features Mechanical True Bypass switching via a Fujisoku 4PDT switch, with the input switched to ground when bypassed. When using a power brick, it should be connected to a high current power jack if possible. If not, the pedal can be powered by leaving a battery in the pedal and following a specific startup procedure. It's important to verify the information with the manufacturer's official documentation for the most accurate and up-to-date details.