Manufacturers
Guitar Pedals from EarthQuaker Devices
Welcome to your ultimate guide to EarthQuaker Devices's guitar pedals. This catalog serves as your starting point to explore and compare all pedals crafted by EarthQuaker Devices. Designed for easy navigation, we hope you can quickly find detailed information on each pedal, including specifications, user reviews, and demo videos. Whether you're searching for the latest releases, seeking to expand your pedal collection, or exploring options for a specific sound, hopefully Stompbx can assist you in finding exactly what you need.
Chorus and Vibrato
The Depths
The Depths by EarthQuaker Devices is an analog optical vibe machine optimized for use with various instruments and pickups. Its technical specifications include: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 21 mA \- Input Impedance: 1 MΩ \- Output Impedance: <1 kΩ \- Flexi-Switch® Technology: This relay-based, true bypass switching style allows for both momentary and latching style switching \- Power: The device takes a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer- isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise. The controls of The Depths include Intensity, Voice, Rate, Level, and Throb, offering a wide range of sound manipulation. It is designed to produce lush, pulsating, three-dimensional swirling sounds and is suitable for a variety of musical styles and setups.
Aqueduct
The Aqueduct by EarthQuaker Devices is a vintage-inspired pitch vibrato pedal with eight modulation modes. It delivers synth-like sonar pulses, touch- sensitive frequency modulation, gentle rolling pitch-wobbles, steady kosmische pulsations, rapid trills, slimy sonic squiggles, whammy bar wiggles, pitch bends, pseudo-flange, and more. The pedal features the following modes: 1\. Sine: Smooth and subtle waveforms associated with classic amp-like vibrato. 2\. Triangle: Sharp rise and fall with a pronounced pitch bend. 3\. Ramp: Sharp sonar pulse followed by a rapid downward slope with a synthesizer-like sustain and release. 4\. Square: Rigid and abrupt waveforms producing instant on-or-off transitions between notes. 5\. Random: Unpredictable assortment of greasy pitch-bends, becoming sloppier and more randomized with increased depth control. 6\. Env D: Envelope-Controlled Depth mode, where pick attack sets the intensity of the modulation. 7\. Env R: Envelope-Controlled Rate mode, where input level controls the LFO rate. 8\. Env P: Envelope-Controlled Pitch mode, with frequency modulation controlled by the dynamics of pick attack. The Aqueduct also features controls for Rate (adjusting LFO speed), Depth (controlling LFO amplitude), and a rotary switch labeled Mode to select between the eight LFO waveshape and envelope combinations. The pedal allows for touch-sensitive dynamic vibrato, chorus, flanger, or tactile pitch drops. It operates with a standard 9V DC power supply and comes with a lifetime warranty.
Sea Machine
The EarthQuaker Devices Sea Machine is a chorus pedal with extensive modulation possibilities. Its features and technical specifications include: \- Controls: 1\. Animate: Controls the pitch-shifted signal's swing, from tight and focused to wild and animated. 2\. Dimension: Adds slap-back, reverb-like ambiance, and echo-resonance effects. 3\. Intensity: Adjusts the blend of modulated signal with the dry signal. 4\. Depth: Modulates the delay time. 5\. Shape: Adjusts the wave from triangle to square. 6\. Rate: Sets the speed of the LFO, with a miniature LED displaying the tempo. \- Measures: 4 5/8″ x 2 1/2″ x 2.25″ with knobs. \- Power: Requires any standard regulated 9-volt power supply with a negative center 2.1mm barrel. It does not use batteries and has a current draw of around 100mA. \- Design: The Sea Machine is a hybrid of digital and analog circuitry with a slightly extended delay time, allowing for a unique chorus effect. \- Compatibility: Designed to work well following fuzz, distortion, or overdrive without compromising the signal quality. \- Bypass: True bypass with a transparent buffer that leaves the all-analog dry signal unaltered and clear. The Sea Machine offers a wide range of modulation effects, making it suitable for guitar and bass players seeking versatile chorus capabilities.
Delay
Disaster Transport Sr.
The Disaster Transport Sr. by EarthQuaker Devices is a dual delay with reverb and modulation designed to create a lo-fi swirling tape-styled echo. It features the following specifications: \- Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs \- Current Draw: 107 mA \- Input Impedance: 500 kΩ \- Output Impedance: <1 kΩ \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel The top row of controls is for delay A, which is a 600ms delay with modulation, while the bottom row of controls is for delay B, a 300ms delay with reverb. Both delays can be run separately, in parallel, in series, or in series/parallel. The pedal also offers expression controls for the repeats on delay A and the ability to bleed delay A into delay B. The switching allows each delay to be used individually or in tandem with both true bypass or trails. The controls for delay A include Time, Repeats, Mix, Depth, Rate, and Bleed, while delay B controls include Reverb, Mix, Repeats, and Time. The pedal can be used to create a wide variety of sounds, from old school tape-style echo to warped records, clanging flange, smooth chorus, and other-worldly effects. The pedal's signal flow and suggested settings are also provided for users to explore different configurations and audio samples are available for reference.
Avalanche Run
The Avalanche Run by EarthQuaker Devices is a stereo reverb and delay pedal with the following features and technical specifications: \- Dimensions: 4.65 x 4.15 x 2.25 inches (118 x 105 x 57 mm) with knobs \- Current Draw: 410 mA \- Input Impedance: 1 MΩ \- Output Impedance: 100 Ω \- Signal-to-Noise Ratio: 115dB typical \- 24-bit 96kHz A/D & D/A converters \- All analog dry signal path \- All digital wet signal path with 20Hz – 20kHz frequency response \- Expression Jack: Located on the west side of the pedal, it is a TRS jack with the tip acting as the wiper. It is recommended to use a Moog expression pedal with the output adjustment knob all the way up. Other expression pedals are not guaranteed to work with the Avalanche Run. \- Flexi-Switch® Technology: This relay-based, true bypass switching style allows simultaneous use of momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as desired to use the effect. Once released, the effect will be bypassed. Since the switching is relay-based, it requires power to pass signal. \- Power: It is recommended to use the included 9v center-negative 1-amp DC power supply for best results. \- PCBs: Populated by a combination of artificial and human intelligence in Akron, Ohio, USA. \- Assembly: Each and every Avalanche Run is completely assembled, wired, and tested by humans in Akron, Ohio. The pedal includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths, and an assignable expression control that maps the expression jack to a control of your choice, including the toggle. The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in the Dispatch Master, only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. The pedal also features controls for Time, Repeats, Tone, Mix, Expression Jack Assign Switch, Decay, R Mix, Time, Repeats, D Mix, Ratio Selector Switch, Decay, Toggle Switch (Mode Selector), and Mix. The Avalanche Run offers various audio samples for guitar, bass, and synth, and supports mono, stereo, and mono in/stereo out configurations for different audio setups.
Disaster Transport Jr.
The Disaster Transport Jr. by EarthQuaker Devices is an analog-voiced digital delay pedal with the following technical specifications and features: \- Dimensions: 4.37″ X 2.37″ X 1.07″ with knobs \- Power: Standard regulated 9-volt DC power supply with a negative center 2.1mm barrel (Do not run at higher voltages) \- Current draw: Approximately 25mA \- Delay time: 625ms \- All analog dry signal path \- True bypass switching \- Mix control: Sets the output level of the effected signal \- Tone control: Allows the user to choose their desired sound and results in more natural tape-like repeats \- Time control: Ranges from about 30ms fully counter-clockwise to about 625ms fully clockwise \- Repeats control: Sets the regeneration of the delay line, ranging from one single repeat to near infinite repeats and self-oscillation The Disaster Transport Jr. is designed to provide vintage tape echo characteristics and offers a unique tone control that doubles as a noise filter on longer delay settings. It is suitable for those who appreciate a vintage tape echo with its peculiarities.
Dispatch Master
The Dispatch Master by EarthQuaker Devices is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space- saving enclosure. It features the following controls: 1\. Mix: A wet/dry blend that adjusts the overall level of the affected signal. 2\. Time: Sets the delay time from 0ms to 1500ms (1.5 seconds). 3\. Reverb: Controls the amount of reverb. Counterclockwise is less reverb, clockwise is more reverb. 4\. Repeats: Controls the regeneration of the delay signal. When set to maximum, it provides infinite repeats without runaway self-oscillation. The Dispatch Master also offers the flexibility to use it as a delay only or reverb only, with the Repeats control having a secondary function in reverb- only mode to adjust the decay, depth, and tonal quality of the reverb. Additionally, the pedal features new Flexi-Switch® Technology, allowing users to dip into ambient delay and reverb sounds for just one note by pressing and holding the footswitch for as long as the effect is needed. The pedal is designed to provide up to 1.5 seconds of delay time with near- infinite repeats and can be used for various musical applications, from subtle effects to creating ambient and post-rock guitar sounds. The Dispatch Master is available for purchase at a price of $199.00 and comes with a lifetime warranty. For more detailed technical specifications, please visit the official EarthQuaker Devices website.
Space Spiral
The Space Spiral by EarthQuaker Devices is a modulated delay device with the following technical specifications and features: \- Delay Time: Ranges from 30ms to 600ms, adjustable by turning the knob to the left for less delay and to the right for more delay. \- Repeats: Controls the regeneration of the delay signal, increasing clockwise and gradually building into self-oscillation around 3 o'clock. The oscillation will continue until the Repeats control is brought back down below the 3 o'clock threshold. \- Mix: Controls the blend of wet signal with the dry signal, with more reverb clockwise and less counterclockwise. \- Depth: Controls the desired amount of modulation, with clockwise for more and counterclockwise for less. \- Shape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise. \- Rate: Controls the speed of the modulation, with clockwise for fast and counterclockwise for slow. Additional Specifications: \- Dimensions: 4.625″ x 2.5″ x 2.25″ with knobs \- Power: The pedal takes a standard 9-volt DC power supply with a 2.1mm negative center barrel. Current draw is 50 mA. The Space Spiral is designed to provide dark, dreamy, and modulated delay, reminiscent of vintage oil can and tape delays, with the capacity for self- oscillation and a wide range of adjustable parameters for modulation and delay time.
Distortion
Sunn O))) Life Pedal
The Sunn O))) Life Pedal by EarthQuaker Devices is a distortion pedal with a blendable analog octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modeled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The pedal introduces two additional clipping options to better adapt to different rigs, including a no diodes option for full, grinding OpAmp assault at maximum volume, an asymmetrical clipping configuration, and the stock double silicon diode configuration for the classic tone. The Octave in the Sunn O))) Life Pedal is an all-discrete, analog full-wave rectifier circuit built around a pair of Russian Germanium diodes. It slowly blends in the octave effects as you turn it clockwise and can be used via expression control for wild, hands-free octave swells mid-riff. The "Magnitude" section is a simple all-discrete MOSFET booster designed to blast preamp tubes and drive them wild, adding very little color to the tone. The signal path goes Octave > Distortion > Boost, and the octave distortion and booster can be used independently with their own respective footswitches. The pedal also features a low pass filter, a clipping switch, and an expression pedal input for controlling the analog octave blend. The technical specifications include dimensions of 4.65 x 3.65 x 2.25 inches (118 x 93 x 57 mm) with knobs, and a current draw of 15 mA. The input impedance for the octave distortion is 1 MΩ, and the output impedance is less than 1 kΩ. The input impedance for the booster is 500 kΩ, and the output impedance is less than 1 kΩ. The Sunn O))) Life Pedal also features Flexi-Switch® Technology, allowing for both momentary and latching style switching, and it operates with a standard 9-volt DC power supply with a 2.1mm negative center barrel.
Life Pedal
The Sunn O))) Life Pedal by EarthQuaker Devices is a distortion pedal with a blendable analog octave up and a booster. The pedal features a compact design and includes the following technical specifications: Dimensions: 4.75 x 5.65 x 2.25 inches (121 x 144 x 57 mm) with knobs Current Draw: 15 mA Octave Distortion Input Impedance: 1 MΩ Octave Distortion Output Impedance: <1 kΩ Booster Input Impedance: 500 kΩ Booster Output Impedance: <1 kΩ The pedal's circuit has been meticulously tweaked to maximize heavy crushing tone, with the octave section fine-tuned to make it more pronounced without losing the bottom end. It also includes a third footswitch, utilizing Flexi- Switch Technology, for the octave to allow quick and radical tone shaping. The "Amplitude" side of the pedal is faithfully modeled after the classic "White Face" distortion unit, using modern, reliable components. The pedal introduces two additional clipping options to adapt to different rigs, providing a range of crunch and compression options. The "Octave" in the pedal is an all-discrete, analog full-wave rectifier circuit that slowly blends in the octave effects as the control is turned clockwise. The "Magnitude" section is a simple all-discrete MOSFET booster designed to add very little color to the tone while providing plenty of output to push the amp into saturation. The signal path goes Octave > Distortion > Boost, and the octave distortion and booster can be used independently with their own respective footswitches. The pedal also features various controls including Octave, Distortion, Filter, Magnitude, and a Clipping Switch, as well as an Octave EXP input for expression pedal control. The Sunn O))) Life Pedal offers a versatile range of distortion and octave effects, making it a powerful tool for guitarists seeking a wide spectrum of heavy tones.
Sunn O))) Life Pedal V1
The Sunn O))) Life Pedal V1 by EarthQuaker Devices is a distortion pedal with a blendable analog octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modeled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The pedal introduces two additional clipping options to better adapt to different rigs. The first position is no diodes to allow for full, grinding OpAmp assault at maximum volume. The second position utilizes two silicon diodes and one LED in an asymmetrical clipping configuration, delivering a slightly compressed and smooth crunch, similar to a valve amplifier. The last position is the stock double silicon diode configuration which provides that classic tone. The Octave in the Sunn O))) Life Pedal is an all-discrete, analog full-wave rectifier circuit built around a pair of Russian Germanium diodes. The Octave control slowly blends in the octave effects as you turn it clockwise. This feature can also be used via expression control allowing for wild, hands-free octave swells mid-riff. The "Magnitude" section of the pedal is a simple all- discrete MOSFET booster designed to blast your preamp tubes and drive them wild. It is a 100% clean, no-nonsense, high impedance booster that adds very little color to your tone. The signal path goes Octave > Distortion > Boost. The octave distortion and booster can be used independently with their own respective footswitches. The pedal also features various controls including Octave, Distortion, Filter, Amplitude, Clipping Switch, and Magnitude. The Sunn O))) Life Pedal V1 can be powered by a 9V battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel.
Fuzz
Hoof Reaper V2
The Hoof Reaper V2 by EarthQuaker Devices is a dual fuzz pedal that combines the popular Hoof and Tone Reaper fuzz pedals in one enclosure with an added analog octave up. It offers the following features and technical specifications: \- Controls: \- Hoof: Level, Fuzz, Tone, Shift \- Tone Reaper: Level, Fuzz, Tone \- Available Switching Combos: \- Hoof Alone \- Reaper Alone \- Octave Alone \- Reaper + Octave \- Hoof + Octave \- Hoof + Reaper \- Hoof + Reaper + Octave \- Hoof: \- Germanium/silicon hybrid Muff-style fuzz \- Massive volume and smooth amp-like sustain \- Shift control alters the frequency response of the tone control \- Tone Reaper: \- Vintage style fuzz device based on the "3 knob" bender \- Silicon/germanium hybrid capable of producing a wide range of tones \- Octave: \- Classic monophonic octave up effect \- More pronounced when using the neck pickup and playing above the 12th fret \- Tech Specs: \- Effects: Fuzz, Octave \- Power: 9V DC \- Bypass: True bypass \- Analog/Digital: Analog \- Current Draw: 6mA \- Dimensions: 4.75 x 5.65 x 2.25 inches (121 x 144 x 57 mm) with knobs \- Weight: 539g The Hoof Reaper V2 is designed to provide a wide range of fuzz tones and octave effects, offering flexibility and versatility for guitarists and musicians.
Hizumitas
The Hizumitas by EarthQuaker Devices is a faithful sonic recreation of Wata from Boris’ go-to fuzz pedal, the Elk BM Sustainar. It delivers heavy saturation with a gritty edge and a massive bottom while maintaining a clear and dynamic tone with enough mids and top end to cut through the sludge. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 10 mA \- Input Impedance: ≈150 kΩ \- Output Impedance: <10 kΩ \- Pedal Type: Fuzz \- Analog/Digital: Analog \- Inputs: 1 x 1/4" (instrument) \- Outputs: 1 x 1/4" \- True Bypass: Yes, Relay Switching \- EQ: Tone Control Features: \- Volume: Adjusts the output volume. Unity is around 9-10 o’clock. \- Sustain: More distortion and sustain clockwise; less counterclockwise. \- Tone: Boosts bass frequencies clockwise and boosts highs counterclockwise. This control has a massive effect on the character of the Hizumitas. Design Notes: \- The Elk Sustainar is a Japanese variant of the more well-known “Triangle” BMP. \- The Hizumitas has loads of heavy distortion and smooth sustain with an underlying grit. \- The Sustain control has a wide range of saturation, with excellent response to different pickup types and playing dynamics. \- The Tone control can drastically change the distortion’s character in conjunction with the Sustain setting. The Hizumitas offers a huge amount of headroom and excellent response to different pickup types and playing dynamics. It is designed to deliver heavy distortion and smooth sustain with an underlying grit, while still maintaining clarity and dynamic tone.
Park Fuzz Sound
The EarthQuaker Devices Park Fuzz Sound is a vintage Germanium fuzz pedal that faithfully recreates the original Park Fuzz Sound while incorporating modern upgrades. The pedal features metal film resistors and caps for quieter performance, NOS matched germanium transistors for consistent tones, and a wider fuzz range, more than twice the original. It also has a smaller footprint, true bypass switching with LED indication, and is power supply compatible. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs \- Current Draw: 3 mA \- Input Impedance: 100 kΩ \- Output Impedance: <1 kΩ Controls: 1\. Volume: Level control, louder to the right, quieter to the left 2\. Treble/Bass: Tone control, thicker tones to the right, brighter to the left 3\. Fuzz: Gain control, more fuzz to the right, less to the left The pedal is hand-made in Akron, Ohio, wire for true bypass, and accepts a standard 9V center-negative Boss-style power adapter with a low current draw of 3 mA.
Cloven Hoof
The Cloven Hoof by EarthQuaker Devices is a fuzz pedal that offers a bass- heavy, gritty tone with increased crunch compared to the standard Hoof. It features four specially selected silicon transistors for higher gains, cleaner cleans, and improved temperature stability. The fuzz control has four times the range of the regular Hoof, allowing it to go from completely clean to an all-out fuzz fury with more grind at the top end of the dial. The tone control has been refined to allow a more even sweep with enough mids to handle all the additional low end. The shift control boosts or cuts the mids, providing a significant amount of output. The pedal's dimensions are 4 5/8" x 2 1/2" x 2.25" with knobs, and it requires a standard 9-volt DC power supply with a negative center 2.1mm barrel or a 9V battery, with a current draw of about 10mA. The Cloven Hoof is designed for those seeking a fuzz pedal with a bass- heavy, gritty tone and increased crunch.
Zap Machine
The Zap Machine by EarthQuaker Devices is a dual-channel, silicon/germanium hybrid dirt device with an extremely wide and dynamic range. It offers near clean boost with the gain at minimum on the low gain Green Channel, and gigantic overloaded distortion tones with gain at maximum on the high gain Red Channel. The Bass control adjusts the low frequencies coming into the Zap Machine, while the Treble control adjusts the high frequencies coming out, allowing for different flavors of boost, drive, distortion, and fuzz not commonly heard from transistor-based dirt devices. The pedal is designed to be very "amp-like" in response to picking dynamics, saturation, and clean up. The Zap Machine V2 features a rugged, vintage amplifier-inspired design with NOS carbon composition resistors and big high voltage caps, along with a NOS low gain germanium transistor. It is true bypass, with all discrete analog circuitry and is handmade one at a time in Akron, Ohio. Each Zap Machine is dated and numbered and comes with a hand-signed certificate of authenticity. The pedal measures 4.7″ x 3.7″ x 1.18″ with knobs and has a current draw of 10 mA. It operates with a standard 9-volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to avoid extra noise.
Black Ash
The Black Ash by EarthQuaker Devices is a limited-edition fuzz/overdrive pedal that draws inspiration from the vintage "three-knob Bender." It incorporates rare and irreplaceable components, including paper-in-oil capacitors and NOS half-watt carbon composition resistors from EQD President Jamie Stillman’s personal stash. The pedal features the following technical specifications: \- Measures: 4.75" x 2.50" x 2.25" with knobs \- Current Draw: 20 mA \- Input Impedance: 100 kΩ \- Output Impedance: 22 kΩ \- Switching: True bypass with electronic relay-based switching \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise. The controls on the Black Ash pedal include Fuzz (adjusts the amount of gain), Top (adjusts high frequencies between 2kHz - 10kHz and controls the guitar's presence in the mix), and Level (sets the output volume).
Hoof Reaper
The Hoof Reaper by EarthQuaker Devices is a dual fuzz pedal with an added analog octave up feature. It combines the popular Hoof and Tone Reaper fuzz pedals in one enclosure, providing a versatile range of tones. The Hoof Reaper V2 is capable of creating everything from subtle octave-up overtones to crushing octave squalls that simulate exploding stacks of amps. Key Features: \- Dual Fuzz Octave: Combines Hoof Fuzz, Tone Reaper, and Tentacle Octave in one pedal \- Individual and Combined Use: Each effect can be used individually as well as in series \- Switching Combos: Offers various switching combinations for different effects \- Controls: Includes controls for Level, Fuzz, Tone, and Shift for the Hoof, and Level, Fuzz, and Tone for the Tone Reaper \- True Bypass: Features silent soft-touch switching with a true bypass Specifications: \- Current Draw: 18 mA \- Dimensions: 4.75" x 5.65" x 2.25" \- Lifetime Guarantee \- Hand-built in the USA The Hoof Reaper V2 is known for its versatility, offering a range of fuzz tones from warm, gritty overdrive to sustaining fuzz. It is designed with a germanium/silicon hybrid muff-style fuzz and a vintage-style fuzz device based on the "3 knob" bender. The analog octave up effect adds a classic octave sound to the fuzz tone, allowing for a wide range of tonal possibilities. Overall, the Hoof Reaper V2 is a versatile and powerful pedal that provides a wide array of fuzz and octave effects for guitarists and bassists alike.
Hoof V1
The Hoof V1 by EarthQuaker Devices is a hybrid Germanium/Silicon vintage fuzz pedal that offers a range of features and technical specifications: Features: \- Hybrid Germanium/Silicon design \- Flexible tone-shaping controls \- Rich sustain \- No-fuss, easy-to-use device \- Capable of producing warm, gritty overdrive to a huge, sustaining fuzz \- Germanium/Silicon hybrid Muff-style fuzz \- Massive amounts of volume with smooth amp-like sustain \- Tighter, cleaner sound than most Muff’s \- Shift control to alter the frequency response of the tone control \- Vintage style fuzz device based on the “3 knob” bender \- Capable of producing a wide range of tones from every bender era \- Classic monophonic octave up that adds a swelling octave to the fuzz tone Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches \- Current Draw: 15 mA \- Input Impedance: 130 KOhm \- Output Impedance: <10 KOhm \- True bypass switching The Hoof V1 is a versatile and powerful fuzz pedal that has become a go-to choice for many well-known fuzz connoisseurs.
Bit Commander
The Bit Commander by EarthQuaker Devices is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. Its interface allows for easy addition or subtraction of octaves to create a wide variety of sounds without the need to dial in envelopes or oscillators. The pedal features the following controls: 1\. Level: Master volume 2\. Filter: Tone control for more highs clockwise and more warmth counterclockwise 3\. Base: Squared input signal level 4\. Sub: Two octaves down level 5\. Down 1: One octave down level 6\. Up 1: One octave up level Technical specifications include: \- Dimensions: 4.75" x 2.50" x 2.25" with knobs \- Current Draw: 25mA \- Input Impedance: 50K Ohm \- Output Impedance: <500 Ohm \- Flexi-Switching technology for momentary and latching style switching \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel The Bit Commander V2 has a fully analog dry signal path and electronic relay- based true-bypass switching. It is designed to be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel.
Hoof
The Hoof by EarthQuaker Devices is a flagship fuzz pedal known for its versatile capabilities. It is a germanium/silicon hybrid Muff-style fuzz, based on the classic green Russian fuzz circuit, offering warm, gritty overdrive to a sustaining fuzz. The pedal features a tight, clean sound, making it more cutting and discernible in a band setting. The shift control alters the frequency response of the tone control, allowing for a variety of tonal options. The Hoof is designed with massive amounts of volume and smooth, amp-like sustain. Additionally, it has become a go-to fuzz for many well-known fuzz connoisseurs. The Hoof Reaper Double Fuzz with Octave Up combines the popular Hoof and Tone Reaper fuzz pedals in one enclosure with the added bonus of an old school analog octave up. It is capable of creating everything from subtle octave-up overtones to crushing octave squalls that simulate exploding stacks of amps. Each effect can be used individually as well as in series, with the order of effects preset for optimum performance. The controls for the Hoof include Level (output volume), Fuzz (sustain and gain), Tone (treble to the right, bass to the left), and Shift (controls the mid frequencies). The Tone Reaper features controls for Level (output volume), Fuzz (sustain and nature), and Tone (treble to the left, bass to the right). The Octave effect adds a classic monophonic octave up that will add a swelling octave to the fuzz tone. The Hoof by EarthQuaker Devices is designed to offer a wide range of tones, from warm overdrive to sustaining fuzz, making it a versatile and sought-after pedal for guitarists.
Data Corrupter
The EarthQuaker Devices Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes the input signal and amplifies it into a crushing square wave fuzz tone, which is then multiplied, divided, and modulated to create a wild, yet repeatable, three-voice guitar synthesizer. Key Features: \- Modulated Monophonic Harmonizing PLL \- Three-position switch on the Master Oscillator control panel for octave selection \- Frequency Modulator for pitch-bend modulation in Glide mode or retro sci-fi laser effects in Vibrato mode \- Subharmonic with eight lower octave programs \- Square wave fuzz tone blending Technical Specifications: \- Power Usage: 25mA \- Dimensions: 5.65" x 4.75" x 2.25" \- Weight: 1.1 lbs \- Power Source: 9V DC transformer isolated power supply with a 2.1mm negative center barrel \- True Bypass \- Silent relay-based switching \- All-analog signal path \- Top-mounted jacks for pedalboard implementation The Data Corrupter is designed around a CMOS Phase Locked Loop (PLL) IC and is inspired by the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. It offers expressive and accurate tracking, making it suitable for creating unique synth tones.
Erupter
The Erupter by EarthQuaker Devices is an ultimate classic fuzz pedal designed to deliver a well-rounded and defined fuzz tone with just enough intensity. Here are the technical specifications and features: \- Controls: The Erupter features a Bias control with a center detent for the "perfect" fuzz setting. When in the center position, the tone is big and round with a slight volume boost and great sustain. Turning the control counterclockwise makes the tone more gated with lower output, while turning it clockwise makes it louder and more refined. \- Design: The Erupter is designed to provide a big low end without being too mushy, a biting top end without being too harsh, and just enough output to send a tube amp over the top. It offers excellent wide-range clean up with the guitar’s volume control without losing too much low end. \- Parts: The Erupter uses new production 5% ½ watt carbon composition resistors, metallized polyester film capacitors, Sprague and BC electrolytic capacitors, and NOS, hand-matched, low gain silicon transistors for temperature stability and predictable operation under all extremes. \- Power: The device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise. \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 9 mA \- Input Impedance: 500 kΩ \- Output Impedance: <1 kΩ \- Switching: The Erupter is true bypass and uses electronic relay-based switching. Audio will not pass without power. The Erupter is hand-built in the USA and comes with a lifetime guarantee.
Spires
The Spires by EarthQuaker Devices is a fuzz doubler pedal that combines the Rosac Nu-Fuzz and the discontinued Dream Crusher germanium fuzz pedal in one enclosure. The Green channel features a cranked fuzz inspired by the Rosac Electronic Nu-Fuzz, while the Red channel is a silicon version of the Dream Crusher. The controls include Tone and Green for the Green channel, and Fuzz and Red for the Red channel. The pedal is true bypass and uses electronic relay-based switching. It can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. The dimensions are 4.65 x 3.65 x 2.25 inches (118 x 93 x 57 mm) with knobs, and the current draw is 44 mA. The input impedance for the Red channel is 100 kΩ, and for the Green channel, it is 200 kΩ. The output impedance for both channels is less than 10 kΩ.
Octave/Pitch Shifters
Sunn O))) Life Pedal
The Sunn O))) Life Pedal by EarthQuaker Devices is a distortion pedal with a blendable analog octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modeled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The pedal introduces two additional clipping options to better adapt to different rigs, including a no diodes option for full, grinding OpAmp assault at maximum volume, an asymmetrical clipping configuration, and the stock double silicon diode configuration for the classic tone. The Octave in the Sunn O))) Life Pedal is an all-discrete, analog full-wave rectifier circuit built around a pair of Russian Germanium diodes. It slowly blends in the octave effects as you turn it clockwise and can be used via expression control for wild, hands-free octave swells mid-riff. The "Magnitude" section is a simple all-discrete MOSFET booster designed to blast preamp tubes and drive them wild, adding very little color to the tone. The signal path goes Octave > Distortion > Boost, and the octave distortion and booster can be used independently with their own respective footswitches. The pedal also features a low pass filter, a clipping switch, and an expression pedal input for controlling the analog octave blend. The technical specifications include dimensions of 4.65 x 3.65 x 2.25 inches (118 x 93 x 57 mm) with knobs, and a current draw of 15 mA. The input impedance for the octave distortion is 1 MΩ, and the output impedance is less than 1 kΩ. The input impedance for the booster is 500 kΩ, and the output impedance is less than 1 kΩ. The Sunn O))) Life Pedal also features Flexi-Switch® Technology, allowing for both momentary and latching style switching, and it operates with a standard 9-volt DC power supply with a 2.1mm negative center barrel.
Ghost Echo
The Ghost Echo by EarthQuaker Devices is a vintage-voiced reverb pedal with the following technical specifications and features: Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs Current Draw: 86 mA Input Impedance: 10 MΩ Output Impedance: 1 kΩ Power: 9 volt DC (center pin negative) True Bypass with electronic relay-based switching The pedal offers a pre-delay range of 30ms to 150ms, controlled by the Attack knob, allowing for a variety of reverb effects from quick slapback to deep reverberations. The Dwell control sets the length and thickness of the decay, while the Depth control adjusts the intensity of the reverb. The Ghost Echo is designed to emulate the haunted amp-top spring reverberation units of the past, providing a vintage reverb sound in a compact stompbox format with simple, intuitive controls. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize unwanted noise. The pedal also features updated artwork and silent, relay-based switching for seamless operation.
Rainbow Machine
The Rainbow Machine by EarthQuaker Devices is a polyphonic pitch-shifter pedal that offers a wide range of features and functionality. Here are the technical specifications and details: \- The pedal utilizes modern DSP to create real-time pitch shifting using digital oscillators. \- It features controls for Pitch, Primary function, Tracking, Tone, Secondary function, and Magic regeneration control. \- The Pitch control adjusts the frequency of the polyphonic pitch-warped harmony from a fourth below the input to a third above, and every atonal pitch in-between. It can also be controlled via expression pedal. \- The Primary function control adjusts the volume of the polyphonic harmony. \- The Tracking control adjusts the lag time between the wet and dry signals. \- The Tone control rolls off some treble for a darker, "vintage" sound. \- The Secondary function control adds an octave of the Primary harmony, and when the Pitch control is set to noon, it adds an additional chorus voice for modulated, triple-tracked tones. \- The Magic control is a regeneration control that creates aliasing and other effects by feeding the Primary and Secondary signals back on themselves and each other. \- The pedal also features silent flexiswitch footswitches on both the Activate and Magic functions, allowing for versatile and expressive control. These technical specifications and features make the Rainbow Machine a versatile and powerful tool for creating a wide range of pitch-shifting and modulation effects.
Life Pedal
The Sunn O))) Life Pedal by EarthQuaker Devices is a distortion pedal with a blendable analog octave up and a booster. The pedal features a compact design and includes the following technical specifications: Dimensions: 4.75 x 5.65 x 2.25 inches (121 x 144 x 57 mm) with knobs Current Draw: 15 mA Octave Distortion Input Impedance: 1 MΩ Octave Distortion Output Impedance: <1 kΩ Booster Input Impedance: 500 kΩ Booster Output Impedance: <1 kΩ The pedal's circuit has been meticulously tweaked to maximize heavy crushing tone, with the octave section fine-tuned to make it more pronounced without losing the bottom end. It also includes a third footswitch, utilizing Flexi- Switch Technology, for the octave to allow quick and radical tone shaping. The "Amplitude" side of the pedal is faithfully modeled after the classic "White Face" distortion unit, using modern, reliable components. The pedal introduces two additional clipping options to adapt to different rigs, providing a range of crunch and compression options. The "Octave" in the pedal is an all-discrete, analog full-wave rectifier circuit that slowly blends in the octave effects as the control is turned clockwise. The "Magnitude" section is a simple all-discrete MOSFET booster designed to add very little color to the tone while providing plenty of output to push the amp into saturation. The signal path goes Octave > Distortion > Boost, and the octave distortion and booster can be used independently with their own respective footswitches. The pedal also features various controls including Octave, Distortion, Filter, Magnitude, and a Clipping Switch, as well as an Octave EXP input for expression pedal control. The Sunn O))) Life Pedal offers a versatile range of distortion and octave effects, making it a powerful tool for guitarists seeking a wide spectrum of heavy tones.
Hoof Reaper
The Hoof Reaper by EarthQuaker Devices is a dual fuzz pedal with an added analog octave up feature. It combines the popular Hoof and Tone Reaper fuzz pedals in one enclosure, providing a versatile range of tones. The Hoof Reaper V2 is capable of creating everything from subtle octave-up overtones to crushing octave squalls that simulate exploding stacks of amps. Key Features: \- Dual Fuzz Octave: Combines Hoof Fuzz, Tone Reaper, and Tentacle Octave in one pedal \- Individual and Combined Use: Each effect can be used individually as well as in series \- Switching Combos: Offers various switching combinations for different effects \- Controls: Includes controls for Level, Fuzz, Tone, and Shift for the Hoof, and Level, Fuzz, and Tone for the Tone Reaper \- True Bypass: Features silent soft-touch switching with a true bypass Specifications: \- Current Draw: 18 mA \- Dimensions: 4.75" x 5.65" x 2.25" \- Lifetime Guarantee \- Hand-built in the USA The Hoof Reaper V2 is known for its versatility, offering a range of fuzz tones from warm, gritty overdrive to sustaining fuzz. It is designed with a germanium/silicon hybrid muff-style fuzz and a vintage-style fuzz device based on the "3 knob" bender. The analog octave up effect adds a classic octave sound to the fuzz tone, allowing for a wide range of tonal possibilities. Overall, the Hoof Reaper V2 is a versatile and powerful pedal that provides a wide array of fuzz and octave effects for guitarists and bassists alike.
Sunn O))) Life Pedal V1
The Sunn O))) Life Pedal V1 by EarthQuaker Devices is a distortion pedal with a blendable analog octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modeled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The pedal introduces two additional clipping options to better adapt to different rigs. The first position is no diodes to allow for full, grinding OpAmp assault at maximum volume. The second position utilizes two silicon diodes and one LED in an asymmetrical clipping configuration, delivering a slightly compressed and smooth crunch, similar to a valve amplifier. The last position is the stock double silicon diode configuration which provides that classic tone. The Octave in the Sunn O))) Life Pedal is an all-discrete, analog full-wave rectifier circuit built around a pair of Russian Germanium diodes. The Octave control slowly blends in the octave effects as you turn it clockwise. This feature can also be used via expression control allowing for wild, hands-free octave swells mid-riff. The "Magnitude" section of the pedal is a simple all- discrete MOSFET booster designed to blast your preamp tubes and drive them wild. It is a 100% clean, no-nonsense, high impedance booster that adds very little color to your tone. The signal path goes Octave > Distortion > Boost. The octave distortion and booster can be used independently with their own respective footswitches. The pedal also features various controls including Octave, Distortion, Filter, Amplitude, Clipping Switch, and Magnitude. The Sunn O))) Life Pedal V1 can be powered by a 9V battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel.
Astral Destiny
The Astral Destiny by EarthQuaker Devices is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets. It includes the following features and specifications: \- Reverb Modes: Abyss (huge reverb with no octave effect), Shimmer (adds an upper octave to the reverb tail), Sub (adds a lower octave to the reverb tail), Sub Shimmer (adds an upper and lower octave to the reverb tail), Astral (adds an upper and lower octave combined with a regenerating tail), Ascend (upward pitch bending), Descend (downward pitch bending), and Cosmos (adds a regenerating fifth to the reverb tail). \- Controls: The pedal includes various controls such as Preset (8 position rotary switch to recall presets), Length (controls the length of the reverb decay), Mode (8 position rotary switch to select the reverb mode), Depth (adjusts the intensity of the chorus effect), Rate (adjusts the rate of the chorus effect), Tone (boosts treble clockwise, cuts treble counterclockwise, center is a flat frequency response), Mix (level control for the reverb effect), Activate Footswitch (to activate and deactivate the reverb effect), and Stretch Footswitch (doubles the length of the reverb effect while adding a temporary change in pitch). \- Presets: The Astral Destiny operates between two different modes: Live or Preset. It comes with 8 factory presets, 1 for each reverb mode, that can be edited or completely overwritten. The settings for Length, Depth, Rate, Tone, Mix, as well as EXP assignment and Stretch length can all be stored and recalled. \- Audio Samples: The pedal provides audio samples for guitar, synth, and drum samples to showcase its capabilities. These technical specifications and features make the Astral Destiny a versatile and powerful tool for creating unique and ethereal reverberation effects.
Bit Commander
The Bit Commander by EarthQuaker Devices is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. Its interface allows for easy addition or subtraction of octaves to create a wide variety of sounds without the need to dial in envelopes or oscillators. The pedal features the following controls: 1\. Level: Master volume 2\. Filter: Tone control for more highs clockwise and more warmth counterclockwise 3\. Base: Squared input signal level 4\. Sub: Two octaves down level 5\. Down 1: One octave down level 6\. Up 1: One octave up level Technical specifications include: \- Dimensions: 4.75" x 2.50" x 2.25" with knobs \- Current Draw: 25mA \- Input Impedance: 50K Ohm \- Output Impedance: <500 Ohm \- Flexi-Switching technology for momentary and latching style switching \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel The Bit Commander V2 has a fully analog dry signal path and electronic relay- based true-bypass switching. It is designed to be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel.
Hoof
The Hoof by EarthQuaker Devices is a flagship fuzz pedal known for its versatile capabilities. It is a germanium/silicon hybrid Muff-style fuzz, based on the classic green Russian fuzz circuit, offering warm, gritty overdrive to a sustaining fuzz. The pedal features a tight, clean sound, making it more cutting and discernible in a band setting. The shift control alters the frequency response of the tone control, allowing for a variety of tonal options. The Hoof is designed with massive amounts of volume and smooth, amp-like sustain. Additionally, it has become a go-to fuzz for many well-known fuzz connoisseurs. The Hoof Reaper Double Fuzz with Octave Up combines the popular Hoof and Tone Reaper fuzz pedals in one enclosure with the added bonus of an old school analog octave up. It is capable of creating everything from subtle octave-up overtones to crushing octave squalls that simulate exploding stacks of amps. Each effect can be used individually as well as in series, with the order of effects preset for optimum performance. The controls for the Hoof include Level (output volume), Fuzz (sustain and gain), Tone (treble to the right, bass to the left), and Shift (controls the mid frequencies). The Tone Reaper features controls for Level (output volume), Fuzz (sustain and nature), and Tone (treble to the left, bass to the right). The Octave effect adds a classic monophonic octave up that will add a swelling octave to the fuzz tone. The Hoof by EarthQuaker Devices is designed to offer a wide range of tones, from warm overdrive to sustaining fuzz, making it a versatile and sought-after pedal for guitarists.
Organizer
The Organizer by EarthQuaker Devices is a polyphonic organ emulator designed to replicate the organ tones of the past, combined with the unique "Guitorgan" sound. It offers a warm, analog feel with a hint of Leslie warble, distinct from modern octave shifters. The pedal is capable of tracking chords and single notes across the entire guitar and bass neck. Additionally, it can be used with vocals, synths, horns, and drums. Key Controls: 1\. Up: Level control for the octave up. 2\. Down: Level control for the octave down. 3\. Choir: Mixes the octave up and octave down settings, generating an additional 2 octaves up, 2 octaves down, and direct signal with a slight delay for a "church organ" feel. 4\. Lag: Delay control for the wet signal. 5\. Tone: Adjusts the high-end frequencies. 6\. Direct: Level control for the analog dry signal. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 81 mA \- Input Impedance: 1 MΩ \- Output Impedance: 500 Ω \- Switching: True bypass using electronic relay-based switching \- Power: Standard 9-volt DC power supply with a 2.1mm negative center barrel The Organizer utilizes a mix of analog and DSP circuitry, ensuring a true bypass and an all-analog dry signal path. It is suitable for a wide range of musical applications due to its versatile and high-quality performance.
Data Corrupter
The EarthQuaker Devices Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes the input signal and amplifies it into a crushing square wave fuzz tone, which is then multiplied, divided, and modulated to create a wild, yet repeatable, three-voice guitar synthesizer. Key Features: \- Modulated Monophonic Harmonizing PLL \- Three-position switch on the Master Oscillator control panel for octave selection \- Frequency Modulator for pitch-bend modulation in Glide mode or retro sci-fi laser effects in Vibrato mode \- Subharmonic with eight lower octave programs \- Square wave fuzz tone blending Technical Specifications: \- Power Usage: 25mA \- Dimensions: 5.65" x 4.75" x 2.25" \- Weight: 1.1 lbs \- Power Source: 9V DC transformer isolated power supply with a 2.1mm negative center barrel \- True Bypass \- Silent relay-based switching \- All-analog signal path \- Top-mounted jacks for pedalboard implementation The Data Corrupter is designed around a CMOS Phase Locked Loop (PLL) IC and is inspired by the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. It offers expressive and accurate tracking, making it suitable for creating unique synth tones.
Arpanoid
The Arpanoid by EarthQuaker Devices is a polyphonic pitch arpeggiator effect pedal designed for electric guitar. It features 8 intuitive and expandable modes that work on complex chords as well as single notes in any key. The device has an all-analog dry signal, all-digital wet signal, and true bypass switching. The technical specifications are as follows: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 65 mA \- Input Impedance: 1 MΩ \- Output Impedance: <1 kΩ \- Flexi-Switch® Technology: This relay-based, true bypass switching style allows for both momentary and latching style switching \- Power: The device requires a standard 9-volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer- isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise. The controls on the Arpanoid include Rate, Up/Up-Down/Down Toggle, Step, Wet, Mode, and Dry, providing users with a range of options to customize the pitch arpeggiator effect to their preferences.
Overdrive and Boost
Plumes
The Plumes by EarthQuaker Devices is an all-analog overdrive pedal with a unique approach to a classic tube-like overdrive circuit. It offers the following features and technical specifications: \- Controls: 1\. Level: Controls the output volume. 2\. Gain: Controls the amount of drive. 3\. Tone: Adjusts the tonal characteristics with more bass to the left, more middles in the middle, and more treble to the right. 4\. Clipping Modes (3-Way Toggle): \- Symmetrical LED clipping: Provides more crunch and compression. \- No clipping: Offers wide-open OpAmp drive for clean boost. \- Asymmetrical silicon diode clipping: Delivers more transparency with a loose feel. \- Design Notes: \- The Plumes is based on a classic tube-like circuit, but it features JFET operational amplifiers and raised input impedance to nearly 10 megaohms, resulting in lower noise, better signal integrity, and more chime in the high end. \- The pedal internally converts the 9v input to +/- 9v to provide more headroom, resulting in a more three-dimensional tone with added clarity. \- Clipping Options: \- Mode 1: Symmetrical LED clipping for a classic crunch. \- Mode 2: Clean boost mode with straight OpAmp drive. \- Mode 3: Asymmetrical silicon diode arrangement for a warmer low-end response and lower output. \- Tone Control: \- The reimagined tone control is finely tuned to sculpt low end, clear top end, and focus midrange with blooming sustain. It operates through the whole range, offering a big and clear low end, bright and cutting high end without killing the mids. \- Audio Samples: \- The pedal is demonstrated with guitar, bass, and synth samples on the EarthQuaker Devices website. These features and technical specifications make the Plumes a versatile and innovative overdrive pedal suitable for various musical applications.
White Light
The White Light by EarthQuaker Devices is a hard clipping, vintage-voiced overdrive pedal that draws inspiration from classic dirt pedals that defined the sounds of heavy rock. It offers total control over the feel and voice of the distortion, along with a modern presence that is highly responsive to the player's style. The pedal features the following controls: 1\. Gain: Controls the amount of distortion. 2\. Weight: A multi-functional control that allows adjustment of saturation, bass response, and the overall feel of the device. 3\. Level: Controls the output. 4\. Compression Switch: Allows selection between an open-voiced overdrive with more high-mids and bite, or more compression with less bite and flatter mid- range. The White Light pedal is all analog, true bypass, and handmade one at a time in Akron, Ohio. It is designed to work well with both humbuckers and single coils, adding a 70s grit to the tone. The pedal is housed in an enclosure measuring 4.37″ X 2.37″ X 1.5″ with knobs. In terms of power, the pedal requires a standard 9-volt DC power supply with a 2.1mm negative center barrel. The current draw is 6 mA. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise. The White Light pedal has been updated with a new enclosure, top-mounted jacks, and features EarthQuaker Devices' proprietary Flexi-Switch® Technology. It is limited to 2,000 units worldwide and is a reissue of a classic EQD overdrive circuit based on the OD205 and Distortion+ circuit.
Arrows
The Arrows by EarthQuaker Devices is an all-discrete tone sculpting preamp booster designed to add an additional channel of gain to all dirt pedals and brighten up neck pickups. It boosts midrange, tightens up the low end, and enhances the top end while adding push to drive dirt into blooming sustain with excellent harmonics. The pedal features a simple interface with a single control that can either boost or cut the signal. It is all analog, true bypass, and handmade one at a time in Akron, Ohio. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 8 mA \- Input Impedance: 10 MΩ \- Output Impedance: <10 kΩ \- Switching: True bypass \- Control: Level control to adjust the output level The Arrows is versatile and can be used to remove muck from bass-heavy fuzz pedals, push light overdrives into higher gains, or enhance the signal on its own. It is suitable for guitar, bass, and even synthesizer applications.
Westwood
The Westwood by EarthQuaker Devices is a touch-sensitive translucent overdrive manipulator designed to deliver a clean and pure overdrive effect. It features a mild-mannered light-to-medium gain overdrive with active EQ controls, capable of producing cutting, edge-of-breakup rhythm tones and articulate, singing lead tones with even-order harmonics and sustain. Key Features: \- Level Control: Adjusts the output level, offering a wide range from quiet to loud. \- Drive Control: Adjusts the amount of overdrive, providing a spectrum from clean to dirty tones. \- Bass Control: Selects the amount of low frequencies around 80Hz, allowing for boosting or cutting. \- Treble Control: Selects the amount of high frequencies around 2kHz, enabling boosting or cutting. Technical Specifications: \- Pedal Type: Overdrive \- Analog/Digital: Analog \- Inputs: 1 x 1/4" (instrument) \- Outputs: 1 x 1/4" \- True Bypass: Yes \- Power Source: 9V DC power supply or 9V battery \- Power Requirements: 15mA current draw \- Input Impedance: 1MΩ \- Output Impedance: <1KΩ \- Dimensions: 4.75" x 2.50" x 2.25" with knobs \- Weight: Approximately 0.28 kg \- Made in: USA The Westwood can be powered by a 9V battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. It is equipped with true bypass switching for silent operation and offers a versatile range of overdrive tones with dynamic active EQ controls.
Organizer
The Organizer by EarthQuaker Devices is a polyphonic organ emulator designed to replicate the organ tones of the past, combined with the unique "Guitorgan" sound. It offers a warm, analog feel with a hint of Leslie warble, distinct from modern octave shifters. The pedal is capable of tracking chords and single notes across the entire guitar and bass neck. Additionally, it can be used with vocals, synths, horns, and drums. Key Controls: 1\. Up: Level control for the octave up. 2\. Down: Level control for the octave down. 3\. Choir: Mixes the octave up and octave down settings, generating an additional 2 octaves up, 2 octaves down, and direct signal with a slight delay for a "church organ" feel. 4\. Lag: Delay control for the wet signal. 5\. Tone: Adjusts the high-end frequencies. 6\. Direct: Level control for the analog dry signal. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 81 mA \- Input Impedance: 1 MΩ \- Output Impedance: 500 Ω \- Switching: True bypass using electronic relay-based switching \- Power: Standard 9-volt DC power supply with a 2.1mm negative center barrel The Organizer utilizes a mix of analog and DSP circuitry, ensuring a true bypass and an all-analog dry signal path. It is suitable for a wide range of musical applications due to its versatile and high-quality performance.
Special Cranker
The Special Cranker by EarthQuaker Devices is an all-discrete analog distortion enhancement device designed to provide extra grit and boost to your signal without significantly altering your tone. It is intended to retain the natural nuances and character of your amp. The pedal features the following controls: 1\. Level: Adjusts the output volume. Unity gain is between 10-12 o’clock depending on which diodes are selected. 2\. Diode Selector: Germanium on the left for a softer and more transparent tone, and Silicon on the right for a brighter and more modern edge. 3\. More: Adjusts the gain. This control changes the bias of the transistor, allowing for a range of overdrive tones. 4\. Tone: Rolls off highs counterclockwise and boosts highs clockwise. A flat response can be found around 3 o’clock. The design of the Special Cranker builds upon the characteristics of the Speaker Cranker, offering a spongy, dynamic, and touch-sensitive character with more gain, double the output volume, an added Tone control, and a diode selector switch featuring both asymmetrical Silicon diodes and a new Germanium diode option. The pedal is responsive to playing dynamics and provides excellent clarity. The Level control adjusts the output from nothing to nearly double at maximum. The Special Cranker is suitable for guitar, bass, and synth applications. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 15 mA \- Input Impedance: ≈5 MΩ \- Output Impedance: <25 kΩ The Special Cranker is priced at $99.00 and comes with a lifetime warranty.
Palisades
The Palisades by EarthQuaker Devices is an overdrive pedal with the following technical specifications: \- Dimensions: 4.75 x 5.65 x 2.25 inches (121 x 144 x 57 mm) with knobs \- Current Draw: 25 mA \- Input Impedance: 500 kΩ \- Output Impedance: Less than 10 kΩ \- Flexi-Switch® Technology: This relay-based, true bypass switching style allows simultaneous use of momentary and latching style switching. The pedal features 6 different clipping voices, 5 bandwidth settings, and 2 gain channels, providing a versatile range of overdrive options. It also includes controls for Boost, Gain A, Volume, Gain B, Tone, Voice, Bandwidth, Normal/Bright, and Buffer, offering a high level of customization for users. The Palisades can be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer- isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise interference.
Speaker Cranker
The Speaker Cranker by EarthQuaker Devices is a discrete, all-analog distortion enhancement device designed to provide extra grit and a slight boost without significantly altering the original tone. It is not a booster but rather an overdrive, intended to emulate the effect of adding an extra preamp tube to an amplifier for increased overdrive. Key Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 10 mA \- Input Impedance: 2.2 MΩ \- Output Impedance: <10 kΩ \- Power: Can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel \- Switching: True bypass with electronic relay-based switching; audio will not pass without power Controls: \- More: Controls the amount of dirt, allowing users to adjust the level of overdrive as desired Functionality: \- Enhances single notes with rich harmonics and responsive, tube-like sag \- Thickens power chords and adds crunchiness without muddying the low-end or altering the mid and top-end characteristics \- Preserves the integrity of the original tone while providing a subtle boost and extra grit \- Suitable for adding tube-like breakup to an amp, fattening up the sound of other pedals, or stacking overdrives for cascading gain Warranty: \- The device comes with a limited lifetime warranty, and any issues can be addressed by contacting info@earthquakerdevices.com.
Tone Job
The EarthQuaker Devices Tone Job V2 EQ and Boost pedal offers the following features and technical specifications: Features: \- Active EQ controls for Bass, Mid, and Treble with up to 20 dB of cut or boost \- Interactive EQ controls for altering the response and overall feel of the device \- Level control for boosting the signal up to 5x the original input level \- Can be placed at the beginning of the signal chain to alter the overall character of the instrument or at the end to boost output \- All analog and true-bypass \- Compact design Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs \- Current Draw: 10-21 mA \- Input Impedance: 1 MΩ \- Output Impedance: <1 kΩ \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel \- Switching: True bypass with electronic relay-based switching
Reverb
Ghost Echo V3
The EarthQuaker Devices Ghost Echo V3 Vintage Voiced Reverb pedal has the following technical specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 86 mA \- Input Impedance: 10 MΩ \- Output Impedance: 1 kΩ \- Power: 9 volt DC (center pin negative) \- True bypass with electronic relay-based switching \- Requires standard 9 volt DC power supply with a 2.1mm negative center barrel \- It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise \- Not designed to run at higher voltages The pedal features controls for Attack, Dwell, and Depth, allowing adjustment of pre-delay length, decay length, and wet/dry mix respectively. The Dwell control can lead to self-oscillation at higher settings. The Ghost Echo V3 is designed to emulate the haunted amp-top spring reverberation units of the past, offering a range of reverb effects from quick slapback to ambient reverberations.
Afterneath
The Afterneath by EarthQuaker Devices is an enhanced otherworldly reverberator that combines delay and reverb to create unique tones. It features a completely analog dry signal path, a totally digital delay path, and buffered bypass with Flexi Switch Technology. The pedal has a tails/no tails option on bypass and is built by a mix of robots and humans in Akron, Ohio. The Afterneath offers seven controls, each with unique functions: 1\. Length: Controls the decay length of the reverb. 2\. Diffuse: Adjusts the spread of the reverb. 3\. Dampen: Alters the tonal characteristics of the reverb. 4\. Drag: Separates the individual digital delay lines, creating various delay effects. 5\. Reflect: Alters the depth of the cave and the regeneration of the reverb. 6\. Mix: Alters the balance between the input signal and the effect. The pedal also features a Modes control that changes the way the Drag control functions, with nine different modes available. Additionally, it includes an expression jack for controlling the Drag parameter and operates in 9 different modes, which are selected by the small Mode control. The Afterneath has a current draw of 100mA and requires a standard 9-volt DC power supply with a 2.1mm negative center barrel. It has an input impedance of 1M Ohm and an output impedance of 500 Ohm. The device comes with a limited lifetime warranty.
Ghost Echo
The Ghost Echo by EarthQuaker Devices is a vintage-voiced reverb pedal with the following technical specifications and features: Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs Current Draw: 86 mA Input Impedance: 10 MΩ Output Impedance: 1 kΩ Power: 9 volt DC (center pin negative) True Bypass with electronic relay-based switching The pedal offers a pre-delay range of 30ms to 150ms, controlled by the Attack knob, allowing for a variety of reverb effects from quick slapback to deep reverberations. The Dwell control sets the length and thickness of the decay, while the Depth control adjusts the intensity of the reverb. The Ghost Echo is designed to emulate the haunted amp-top spring reverberation units of the past, providing a vintage reverb sound in a compact stompbox format with simple, intuitive controls. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize unwanted noise. The pedal also features updated artwork and silent, relay-based switching for seamless operation.
Disaster Transport Sr.
The Disaster Transport Sr. by EarthQuaker Devices is a dual delay with reverb and modulation designed to create a lo-fi swirling tape-styled echo. It features the following specifications: \- Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs \- Current Draw: 107 mA \- Input Impedance: 500 kΩ \- Output Impedance: <1 kΩ \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel The top row of controls is for delay A, which is a 600ms delay with modulation, while the bottom row of controls is for delay B, a 300ms delay with reverb. Both delays can be run separately, in parallel, in series, or in series/parallel. The pedal also offers expression controls for the repeats on delay A and the ability to bleed delay A into delay B. The switching allows each delay to be used individually or in tandem with both true bypass or trails. The controls for delay A include Time, Repeats, Mix, Depth, Rate, and Bleed, while delay B controls include Reverb, Mix, Repeats, and Time. The pedal can be used to create a wide variety of sounds, from old school tape-style echo to warped records, clanging flange, smooth chorus, and other-worldly effects. The pedal's signal flow and suggested settings are also provided for users to explore different configurations and audio samples are available for reference.
Avalanche Run
The Avalanche Run by EarthQuaker Devices is a stereo reverb and delay pedal with the following features and technical specifications: \- Dimensions: 4.65 x 4.15 x 2.25 inches (118 x 105 x 57 mm) with knobs \- Current Draw: 410 mA \- Input Impedance: 1 MΩ \- Output Impedance: 100 Ω \- Signal-to-Noise Ratio: 115dB typical \- 24-bit 96kHz A/D & D/A converters \- All analog dry signal path \- All digital wet signal path with 20Hz – 20kHz frequency response \- Expression Jack: Located on the west side of the pedal, it is a TRS jack with the tip acting as the wiper. It is recommended to use a Moog expression pedal with the output adjustment knob all the way up. Other expression pedals are not guaranteed to work with the Avalanche Run. \- Flexi-Switch® Technology: This relay-based, true bypass switching style allows simultaneous use of momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as desired to use the effect. Once released, the effect will be bypassed. Since the switching is relay-based, it requires power to pass signal. \- Power: It is recommended to use the included 9v center-negative 1-amp DC power supply for best results. \- PCBs: Populated by a combination of artificial and human intelligence in Akron, Ohio, USA. \- Assembly: Each and every Avalanche Run is completely assembled, wired, and tested by humans in Akron, Ohio. The pedal includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths, and an assignable expression control that maps the expression jack to a control of your choice, including the toggle. The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in the Dispatch Master, only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. The pedal also features controls for Time, Repeats, Tone, Mix, Expression Jack Assign Switch, Decay, R Mix, Time, Repeats, D Mix, Ratio Selector Switch, Decay, Toggle Switch (Mode Selector), and Mix. The Avalanche Run offers various audio samples for guitar, bass, and synth, and supports mono, stereo, and mono in/stereo out configurations for different audio setups.
Levitation
The Levitation by EarthQuaker Devices is a vintage-voiced reverb pedal designed to fit between dirty 1960s chambers, classic spring, and big, ringing plate reverbs. It features four knobs and one switch for versatile control. The controls include Mix for blending wet and dry signals, Length toggle for decay time, Decay for controlling reverb decay length, Tone for input bandwidth control, and Atmosphere for harmonic regeneration. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs \- Current Draw: 72 mA \- Input Impedance: 1 MΩ \- Output Impedance: <10 kΩ \- Flexi-Switch® Technology: Allows for both momentary and latching style switching \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel The Levitation pedal offers a wide range of reverberation effects and is suitable for various musical styles, from slap back small room sounds to infinite spatial oscillations.
Afterneath V3
The Afterneath V3 by EarthQuaker Devices is a reverb pedal designed to create wild and cavernous reverberations, as well as scattered, short rhythmic delays with unique characteristics. The pedal features seven controls: "Length" for decay length, "Diffuse" for adjusting the spread of the reverb, "Dampen" for tonal characteristics, "Drag" for separating individual digital delay lines, "Reflect" for altering the depth of the cave and regeneration of the reverb, and "Mix" for balancing the input signal and the effect. Additionally, the "Modes" control changes the way the "Drag" control functions, offering nine different modes. The pedal operates with a completely analog dry signal path and a digital delay path, and it features buffered bypass with Flexi Switch Technology, allowing for both momentary and latching style switching. The "Drag" control can be put under voltage or expression control using the "EXP" jack located on the side and operates in 9 different modes, drastically changing the way the "Drag" control functions, especially when using an expression control or CV. The Afterneath V3 is designed to offer a wide range of reverb and delay effects, from subtle to extreme, making it suitable for various musical styles and applications.
Astral Destiny
The Astral Destiny by EarthQuaker Devices is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets. It includes the following features and specifications: \- Reverb Modes: Abyss (huge reverb with no octave effect), Shimmer (adds an upper octave to the reverb tail), Sub (adds a lower octave to the reverb tail), Sub Shimmer (adds an upper and lower octave to the reverb tail), Astral (adds an upper and lower octave combined with a regenerating tail), Ascend (upward pitch bending), Descend (downward pitch bending), and Cosmos (adds a regenerating fifth to the reverb tail). \- Controls: The pedal includes various controls such as Preset (8 position rotary switch to recall presets), Length (controls the length of the reverb decay), Mode (8 position rotary switch to select the reverb mode), Depth (adjusts the intensity of the chorus effect), Rate (adjusts the rate of the chorus effect), Tone (boosts treble clockwise, cuts treble counterclockwise, center is a flat frequency response), Mix (level control for the reverb effect), Activate Footswitch (to activate and deactivate the reverb effect), and Stretch Footswitch (doubles the length of the reverb effect while adding a temporary change in pitch). \- Presets: The Astral Destiny operates between two different modes: Live or Preset. It comes with 8 factory presets, 1 for each reverb mode, that can be edited or completely overwritten. The settings for Length, Depth, Rate, Tone, Mix, as well as EXP assignment and Stretch length can all be stored and recalled. \- Audio Samples: The pedal provides audio samples for guitar, synth, and drum samples to showcase its capabilities. These technical specifications and features make the Astral Destiny a versatile and powerful tool for creating unique and ethereal reverberation effects.
Afterneath V1
The Afterneath V1 by EarthQuaker Devices is an otherworldly reverberation machine that utilizes a swarm of short delays to create wild and cavernous reverbs and scattered, short rhythmic delays with bizarre characteristics. The controls allow users to stretch, smudge, swell, and even self-oscillate into messy ambient washes of sound. The technical specifications and features include: \- Dimensions: 4 5/8″ x 2 1/2″ x 2.25″ with knobs \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are recommended. Current draw is 65 mA. \- Controls: \- Length: Adjusts the decay length of the reverb \- Diffuse: Controls the spread of the reverb, sharper with more attack counter-clockwise, more ambient and washy clockwise \- Dampen: Adjusts the tone of the reverb, brighter tones clockwise, darker tones counter-clockwise \- Drag: Separates the delay lines, creating a stuttering, pingy effect \- Reflect: Controls the regeneration of the reverb, self-oscillates if turned up high \- Mix: Blends the wet signal into the dry, gradually lowering the clean level as turned clockwise The Afterneath V1 is true bypass with an all-digital reverb engine, an all- analog dry signal path, and is hand-made one at a time in Akron, Ohio.
Dispatch Master
The Dispatch Master by EarthQuaker Devices is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space- saving enclosure. It features the following controls: 1\. Mix: A wet/dry blend that adjusts the overall level of the affected signal. 2\. Time: Sets the delay time from 0ms to 1500ms (1.5 seconds). 3\. Reverb: Controls the amount of reverb. Counterclockwise is less reverb, clockwise is more reverb. 4\. Repeats: Controls the regeneration of the delay signal. When set to maximum, it provides infinite repeats without runaway self-oscillation. The Dispatch Master also offers the flexibility to use it as a delay only or reverb only, with the Repeats control having a secondary function in reverb- only mode to adjust the decay, depth, and tonal quality of the reverb. Additionally, the pedal features new Flexi-Switch® Technology, allowing users to dip into ambient delay and reverb sounds for just one note by pressing and holding the footswitch for as long as the effect is needed. The pedal is designed to provide up to 1.5 seconds of delay time with near- infinite repeats and can be used for various musical applications, from subtle effects to creating ambient and post-rock guitar sounds. The Dispatch Master is available for purchase at a price of $199.00 and comes with a lifetime warranty. For more detailed technical specifications, please visit the official EarthQuaker Devices website.
Transmisser
The Transmisser by EarthQuaker Devices is a modulated reverb pedal with extra- long decay fed to a highly resonant filter. It is designed to create an ultimate soundscape-y backdrop for guitar performances. The pedal features the following controls: 1\. Decay: Controls the length of the reverb trails. 2\. Darkness: Adjusts the tone of the reverberated signal. 3\. Freq: Controls the frequency of the resonant filter that processes the reverberated signal. It can also be controlled by an expression pedal. 4\. Warp: A system slew control that affects the depth, decay, modulation, and overall system characteristics. 5\. Rate: Controls the speed of the system-wide modulation. 6\. Mix: Adjusts the reverb blend, determining the amount of wet signal blended with the dry signal. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 76 mA \- Input Impedance: 1 MΩ \- Output Impedance: <1 kΩ \- Switching: True bypass with electronic relay-based switching. Audio will not pass without power. \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies to minimize noise.
Tremolo
Hummingbird
The Hummingbird by EarthQuaker Devices is a choppy, sawtooth tremolo pedal modeled on the vintage "repeat percussion" unit, similar to those found in old Valco and Vox amplifiers. It is capable of producing a wide range of tremolo sounds, from classic '50s-style shimmering tremolo to synthy, delay-like chop and near ring modulation speeds. The pedal features three modes (slow, mid- tempo, fast) and controls for rate, depth, and level. It also offers the ability to use an expression pedal to adjust the rate, allowing for instant changes on the fly and true random amplitude modulation. Additionally, the Hummingbird has clean gain on-tap, allowing users to boost or cut the signal using the level control. When the depth is turned to zero, the Hummingbird becomes a JFET clean boost. Technical Specifications: \- Power: 9V \- Bypass: True bypass \- Analog/Digital: Analog \- Mono/Stereo: Mono \- Dimensions: 4.75" x 2.50" x 2.25" \- Weight: 0.58 lbs The Hummingbird is all-analog, true bypass, and handmade in the U.S.A.
Night Wire
The Night Wire by EarthQuaker Devices is a feature-rich harmonic tremolo pedal. It splits the signal into high pass and low pass filters, then modulates it with an LFO that is split 180 degrees. The pedal allows the center point of both filters to be adjusted for different tones. It offers three filter frequency modes: Manual, LFO, and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept, and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack, and the frequency control acts as a range control, similar to a standard envelope filter. The tremolo section of the Night Wire has two modes: Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode, the speed is controlled by pick attack, and the rate controls the sensitivity. The depth control allows for subtle and shimmery tremolo effects or full-on throbbing tones. Additionally, the pedal features a cut/boost volume control to adjust output levels. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 65 mA \- Input Impedance: 1 MΩ \- Output Impedance: <1 kΩ \- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel The Night Wire also incorporates Flexi-Switch® Technology, allowing for both momentary and latching style switching. It comes with a lifetime warranty.
Wah Wah
Spatial Delivery
The EarthQuaker Devices Spatial Delivery V2 is a voltage-controlled envelope filter pedal with three modes: Up Sweep, Down Sweep, and Sample & Hold. It features controls for Range, Resonance, and Filter, allowing for emphasized filter sweeps and sensitivity adjustments. The filter can be cross faded between high pass, band pass, and low pass for a wide variety of voices. The Resonance control adds body and ring to the filter voice. Technical Specifications: \- Dimensions: 4.75 x 2.50 x 2.25 inches (121 x 64 x 57 mm) with knobs \- Current Draw: 68 mA \- Input Impedance: 500 kΩ \- Output Impedance: <1 kΩ \- Flexi-Switch® Technology: This relay-based, true bypass switching style allows for both momentary and latching style switching \- Power: Standard 9-volt DC power supply with a 2.1mm negative center barrel The Spatial Delivery V2 offers a unique and versatile envelope filter experience, suitable for a range of musical styles and applications.
Interstellar Orbiter
The Interstellar Orbiter by EarthQuaker Devices is a dual resonant filter controlled by a single LFO that sweeps each filter in opposite directions. It features three universal controls: a master Frequency control that governs the center frequency of both filters, a master Rate control for the LFO, and the Direct control for blending in the unaffected dry signal. The LFO sweeps each filter in opposite directions and has a wide range. Each filter is voiced differently and has controls for LFO Intensity, Resonance, and Mix. The pedal also includes expression pedal jacks for both the LFO Rate and the Master Frequency. The Interstellar Orbiter is designed to provide a wide range of possibilities, from wah emulation to complex vocal formant filter and even a fairly convincing rotary speaker effect. It is an all-analog, true bypass pedal with dimensions of 5.65 x 4.75 x 2.25 inches (144 x 121 x 57 mm) and a current draw of 20 mA. The device takes a standard 9-volt DC power supply with a 2.1mm negative center barrel.